ARM Electrical of residential and non residential and building at BSF Campus Jalandhar under FTR HQ BSF Jalandhar Punjab SH Bifurcation of light AND power load in residential type V Qtrs

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground includingexcavation, sand cushioning,protective covering and refillingthe trench etc as required. Above 35 sqmm to 95 sqmm

(ii) Above 95 sqmm to 185 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METALpipe as required.Above 35 sqmm to 95 sqmm

(ii) Above 95 sqmm to 185 sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supplying and laying of 63 MM Dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Drilling of metallic road at 01 mtr below the surface with the help of auger for laying of DWC pipe of size 63 mm dia etc as required

SITC of various sizes water protected outdoor (Water proof) hut type compartmentalized type double door cubical panel both side opening having depth up to 600 mm suitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity of MCCBs and solid copper conductor cable 10 sqmm/ solid aluminium rod for MCBs (approved by Engg in charge) for incoming/Outgoing cables, links for spare MCCBs, heavy duty connectors/ terminals for three and single phase cable connections for MCCBs where as required and marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should be as per design & drawing approved by Engg in charge).LED light min 5 watt with on/off switch to be provided in the panel.

Providing and fixing following rating and breaking capacity Triple Pole 415 V MCCB with thermomagnetic release (With Thermal Magnetic Trip Unit (TMD) with terminal spreaders link in new cubicle panel( item No 5) including drilling holes in cubicle panel, making connections, interconnections , etc. as required. of approved make by engg in-charge.TP 160 Amp/415V, breaking capacity 25 KA

(ii) TP 63 Amp/415V, breaking capacity 25 KA