Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC | ₹7.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹7.8 L+₹784.45 (0.10%)Rejected-AOC | ₹7.8 L+₹784.45 (0.10%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | HITON BUILDERS LLP L2 | SAVAD L1 |
|---|---|---|---|---|---|
| 1.00CIVIL WORK | |||||
| 1.01 | 12.45.1
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm
dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27
mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of
painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS :
2095-Part 1 :2011 (Board with BIS certification marks) | 143.67 | sqm | 1,319.97 ₹1,89,640.09 | 1,318.65 ₹1,89,450.45 Lowest |
| 1.02 | 13.48.1
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Two or more coats applied on walls @
1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10
sqm | 160.47 | sqm | 183.07 ₹29,377.24 | 182.89 ₹29,348.36 Lowest |
| 1.03 | 13.80
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth complete. | 143.67 | sqm | 142.67 ₹20,497.4 | 142.53 ₹20,477.29 Lowest |
| 1.04 | OD126576/2025-2026
Providing and applying white cement based putty of average thickness 2 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth complete. | 102.3 | sqm | 285.3 ₹29,186.19 | 285.01 ₹29,156.52 Lowest |
| 1.05 | 13.45.1
Finishing walls with textured exterior pint of required shade:New work (Two or more
coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer
applied @ 2.20 kg/ 10 sqm | 102.3 | sqm | 282.21 ₹28,870.08 | 281.93 ₹28,841.44 Lowest |
| 1.06 | 15.3
Demolishing R.C.C. work manually / by mechanical means including stacking of
steel bars and disposal of unserviceable material with in 50 metres lead as per
direction of Engineer -in-Charge. | 0.44 | cum | 3,372.7 ₹1,477.24 | 3,369.33 ₹1,475.77 Lowest |
| 1.07 | 13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 3.77 | sqm | 339.63 ₹1,280.41 | 339.29 ₹1,279.12 Lowest |
| 1.08 | OD111431/2025-2026
Providing and fixing Fabric blind Rolling Curtains including all materials, fittings and
labour charges etc complete as per direction of engineer in charge | 23.4 | sqm | 1,656.45 ₹38,760.93 | 1,654.79 ₹38,722.09 Lowest |
| 1.09 | OD111443/2025-2026
Supplying and fixing Sun mica board 0.80mm thick, using good quality gum,
including all materials and labour charges etc complete as per direction of Engineer in
charge | 97.55 | sqm | 737.61 ₹71,951.64 | 736.87 ₹71,879.46 Lowest |
Tender Value
₹7.8 L
EMD Value
₹19,650
Closing Date
10 Sept 2025, 5:00 pmClosed
Chairman and Managing Director KPHCC
KERALA POLICE HOUSING AND CONSTRUCTION CORPORATION LTD CHANDRASEKHARAN NAIR STADIUM, PALAYAM, THIRUVANANTHAPURAM - 695033
State Action Plan 2025-26-Renovation work of Annex Hall at District Training Centre DPO, Malappuram (DSR 2021 )
2025_KPHCC_792997_1
NIT No.58/KPHCC/2025-26
Open Tender
Civil Works - Buildings
Item Rate
90 days
MALAPPURAM
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,900
₹19,650
20 Dec 2025
30 Aug 2025
11 Sept 2025
30 Aug 2025
10 Sept 2025
30 Aug 2025
Amount
CIVIL WORK
12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 :2011 (Board with BIS certification marks)
13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
OD126576/2025-2026 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
13.45.1 Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
OD111431/2025-2026 Providing and fixing Fabric blind Rolling Curtains including all materials, fittings and labour charges etc complete as per direction of engineer in charge
OD111443/2025-2026 Supplying and fixing Sun mica board 0.80mm thick, using good quality gum, including all materials and labour charges etc complete as per direction of Engineer in charge
OD121943/2025-2026 Providing and fixing PVC Wall panelling PVC board 9mm thick (TKT sheet) of size 360x30cm including cost and conveyance of all materials and labour charges etc (excluding frame work)
OD126511/2025-2026 Steel work in built up GP tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
OD126613/2025-2026 Supplying and fixing Etching glass sticker including all materials and labour charges etc complete as per direction from Engineer in charge
OD126622/2025-2026 Supplying and fixing Mono strip Carpet as per direction of Engineer in charge
ELECTRICAL WORK
1.10.2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
OD123660/2025-2026 Supply and Installation of LED Strip Driver 24W,2A,12VDC
OD123661/2025-2026 Supply, Installation, Testing and Commissioning of LED Strip light, 168 LED per metre with necessary accessories as required
OD123662/2025-2026 Supply and Installation of Aluminum profile channel 25 mm wide, fixed on gypsum false ceiling with necessary accessories etc. as required making good the damages
1.17.1 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
OD123723/2025-2026 Supply, Installation, Testing and Commissioning of 3W LED Spot light, Recess mounted with necessary fittings etc. as required
1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1.28.1 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module
1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
90.10.1.2 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface
90.10.1.8 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )10 module moulded plastic box on surface
90.10.1.6 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )8 module moulded plastic box on surface
OD107855/2025-2026 Supply and Installation of 30 W LED Ceiling light, square shape , Recess mounted 2 feet X 2 Feet in size, with necessary fittings as required
OD107856/2025-2026 Supply, Installation, Testing and Commissioning of Modular type RJ45 Socket in position including modular front plate
1.53.1 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
OD107857/2025-2026 Supply, Installation, Testing and Commissioning of 24 Port Gigabit switch 1000 Mbps with necessary fittings etc as required
OD107858/2025-2026 Supply and Installation of 6U Network rack in position with necessary accessories and fittings as required
OD107895/2025-2026 Wiring material and Labor charges for Speaker wiring and connections as required
OD107896/2025-2026 Supply, Installation, Testing and Commissioning of Jack - Jack 1.5 Mtr
OD107897/2025-2026 Supply, Installation, Testing and Commissioning of 5 Inch Spring RAD GS
OD107898/2025-2026 Supply, Installation, Testing and Commissioning of Podium Fitting Adapter
OD107899/2025-2026 Supply, Installation, Testing and Commissioning of 15 Inch Spring GS
OD107900/2025-2026 Supply, Installation, Testing and Commissioning of XR100 4H Wireless Mica SM
OD107901/2025-2026 Supply, Installation, Testing and Commissioning of XR40CC Wireless Mica SM
OD107902/2025-2026 Supply, Installation, Testing and Commissioning of ARC32 30W Wall Speaker SM
OD123716/2025-2026 Labor for Dismantling existing fittings and Refixing the same after completion of works
1.43 Providing and fixing extra conduit down rod of 20 mm dia, 2X10 cm length wiring with 2 X1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
HITON BUILDERS LLP (BID ID -2332438)
Bidder Name
HITON BUILDERS LLP
SAVAD
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1309027.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .