PROVN OF RETROFIT EMISSION CONTROL DEVICES TO DG SETS AT MIL STN PITHORAGARH.

Amount

DESCRIPTION OF ITEMS

Supply, installation, testing & commissioning of Retrofit Emission Control Device (RECD) automatic type for reducing DG Emission, made up of Stainless Steel as per latest CPCB guidelines suitable for DG set of capacity 200 KVA as per stage-II emission norms i.e (NOx+HC ≤ 4.0 , CO ≤ 3.5, PM ≤ 0.2 and smoke limit ≤ 0.7) without affecting any other emission parameters and with following components:

(a) DG capacity range - 200 KVA Model/Make of existing DG Set - Cummins (b) Technology of RECD - Wet Scrubber / ESP (Electrostatic precipitation) / Catalytic Conversion (c) Filter less system (d) No noise level (e) Particulate matter capturing efficiency - Min 70% (f) By product disposal cope - Should in vendor scope (g) Particular size captured - PM 2.5 (h) Actuation Type - Wet Scrubber, Electrostatic Precipitator (ESP) and Catalytic Conversion as per Manufacturers design to achieve the CPCB parameters (j) Cleaning system - Automatic (k) Material of construction (outer body ) - Powder coated mild steel (l) Material of construction inner cell - SS-304 (m) Insulation on emission device - Glass wool (n) Back pressure on engine - No back pressure ( Should be less than 10 Kpa ) and static pressure less than 1 Kpa (o) Testing requirements post installation at site (p) There should not be any Bypass arrangement in RECD to let the pollutants bypass the RECD on any account

Supply, installation, testing & commissioning of Retrofit Emission Control Device (RECD) automatic type for reducing DG Emission, made up of Stainless Steel as per latest CPCB guidelines suitable for DG set of capacity 125 KVA as per stage-II emission norms i.e (NOx+HC ≤ 4.0 , CO ≤ 3.5, PM ≤ 0.2 and smoke limit ≤ 0.7) without affecting any other emission parameters and with following components :-

(a) DG capacity range - 125 KVA Model/Make of existing DG Set - Greaves Cotton Ltd (b) Technology of RECD - Wet Scrubber / ESP (Electrostatic precipitation) / Catalytic Conversion (c) Filter less system (d) No noise level (e) Particulate matter capturing efficiency - Min 70% (f) By product disposal cope - Should in vendor scope (g) Particular size captured - PM 2.5 (h) Actuation Type - Wet Scrubber, Electrostatic Precipitator (ESP) and Catalytic Conversion as per Manufacturers design to achieve the CPCB parameters (j) Cleaning system - Automatic (k) Material of construction (outer body ) - Powder coated mild steel (l) Material of construction inner cell - SS-304 (m) Insulation on emission device - Glass wool (n) Back pressure on engine - No back pressure ( Should be less than 10 Kpa ) and static pressure less than 1 Kpa (o) Testing requirements post installation at site (p) There should not be any Bypass arrangement in RECD to let the pollutants bypass the RECD on any account

Notes for sl No. 1 and 2 : (a) Retrofit Emission Control Device (RECD) shall be of any of the Makes :- M/s P I Green Innovations Pvt Ltd, M/s Platino Automative Pvt Ltd, M/s Chakr Innovation Pvt Ltd, M/s Automoto Genset Solutions LLP, M/s Vasthi Instruments Pvt. Ltd, M/s Maxmoc Motor Works India Pvt Ltd. (b) M& L for MS Pipe Fabrication works from DG exhaust to RECD device Inlet & Outlet including fabrication of MS clamp supports nut bolts etc with required size and length of Power supply cable to run the RECD device and all other aux materials required for installation at site field piping fabrication & erection , civil foundation design & execution (if required),painting etc shall be provided by the contractor and included in quoted rate. Contd......

(c) The RECD device must be tested by one of the five currently CPCB recognized / Approved laboratories :- (i) Automotive Research Association of India , Pune ( Maharashtra ) (ii) International Centre for Automotive Technology, Manesar (Haryana) (iii) Indian Oil Corporation, Research and Development Centre, Faridabad (Haryana). (iv) Indian institute of Petroleum , Dehradun (Uttrakhand) (v)Vehicle Research Development Establishment , Ahmednagar (Maharashtra ) (d) Retrofit Emission Control Device (RECD) must be provided with Anti Vibration mounting arrangements and must be protected against low & high voltage fluctuations, earth fault , & Short circuit protections. (e) Retrofit Emission Control Device (RECD) must be provided with Heat Resistance Paint (Hr Paint) and must be corrosion resistive. (f) After installation of Retrofit Emission Control Device (RECD) ,There SHOULD NOT be any damage to the existing DG sets and in the Operation of DG set for supply of the power.

EX SOLDIERS MECHANICAL WORKS

SHRI HARI CONSTRUCTION

Gurcharan Singh Enterprises

KP ELECTRICAL AND AUTOMATION