REPAIR REPLACEMENT OF STEEL WINDOWS VENTILATORS DOORS AND CEMENT PLASTER IN DOMESTIC AREA AT AF STN KUMBHIRGRAM UNDER AGE I AF KUMBHIRGRAM

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frames ) exc. 1.5 sqm but n.exc. 4 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames ) n.exc. 1.5 sqm each complete all as specified and as directed..

Material and labour 2nd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

material and labour for Preparation of surface of wood and wood based materials steel and iron work new or old of any description and girth not otherwise described and treated with tar and tar coal black. complete all as specified and as directed.

Supply and fix wall ties, hold fasts hooks for hanging fans, boarding, wind tie,purlins etc and similar small articles conforming to Fe.290, Gde-E-250. complete all as specified and as directed.

Material and labour 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

Supply and fix Mild steel butt hinges medium weight , clod rolled,100mm, ISI marked, complete all as specified and as directed.

Supply and fix 200 mm long Aluminium anodised barrel tower bolt extruded section (Conforming to IS) complete all as specified and as directed.

Supply and fix Extruded aluminium alloy handles, 150mm fabricated type, anodised complete all as specified and as directed.

Supply and fix 300 mm long Aluminium anodized sliding door bolt with haps and staple (bolt type) and fixing clips of sheet, cast and extruded section and fixing bolts and sliding bolts of extruded section and cast aluminium alloy complete all as specified and as directed.

Supply and fix 2nd class hard wood hollock small fittings such as brackets of any type, latch and hinge blocks, door stops and window stops, the like incl all necessary labours articles n. exc 200 cucm each complete all as spfd.

Material and labour two coats of synthetic enamel paint over a coat of pink primer to new wooden surface of any description, not otherwise descri-bed, over 10cm width or girth as directed. complete all as specified and as directed.

Material and labour 30 mm thick 2nd class H/W Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed

-ditto- as per ser items no.above in windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as specified and as directed. complete all as specified and as directed.

Supply and fixed galvanized mild steel wire cloth 0.56mm fixed nominal dia of wire and avrg widh of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

Supply and fix Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix Mild steel butt hinges medium weight , clod rolled,75mm, ISI marked, complete all as specified and as directed

Supply and fix 3mm thick Sheet glass, ordinaly quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane

Supply and fix Extruded aluminium alloy handles, 75mm fabricated type, anodised

Supply and fix 100 mm long Aluminium anodised barrel tower bolt extruded section (Conforming to IS)

Supply and fin in repair steel window with side hung shutters with projecting type hinges, 3mm thick 100mm long copper oxidised finish mild steel handle and 3mm thick 300mm long mild steel copper oxidised finish peg stays and with glazing bars, dovetailed or welded with applying one shop coat of red oxide zinc chromate primer before fixing including taking down old unserviceable steel windows form existing position and making good disturbed surfaces of walls etc in all respect as per existing specification complete all as specified and as directed

Ditto as per item No 21 but with out glazing bars complete all as specified and as directed.

Material and labour two coats of synthetic enamel paint over a coat of red oxide primer to to new steel surface over 10cm in width or girth,not otherwise described complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and as directed.

Supply and fix facory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC's channel having PVC sheet trip of 20mm wide stuck inside with solvent cement for styles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap for top rail and bottom rail panelling of plain colour PVC sheet to be fitted to the styles and rails with suitable PVC sheet beading and jointed to gether with solvent cement supplying and fixing in the frame including butt hinges at site as per specification and drawing complete all as specified and as directed.

Supply and fix 150 mm long Aluminium anodised barrel tower bolt extruded section (Conforming to IS). complete all as specified and as directed.

Supply and fix Extruded aluminium alloy handles, 100mm fabricated type, anodised, complete all as specified and as directed..

Refixing of shutter in same opening of area exc 1 sqm n .exc 2 sqm each door shutter complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm n .exc 2 sqm each complete all as specified and as directed.

Taking down shutter of any description area n.exc 1 sqm each complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in position in framed or unframed work complete all as specified and as directed.

Material and labours for 2nd class hard wood in scantling clean sawn finished as in framed or un framed work complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in fillet, rails , posts, purlins, etc under 40 sqcm in section in unframed work. complete all as specified and as directed.

Material and labour 2nd class HW plain fillets, square, rectangular, or triangular in section, wrought, screwed with nails or brads sectional area exc. 6 Sqcm but n exc 13 Sqcm complete all as specified and as directed.

Taking up or down steel water tubing and connections of 15 mm bore complete all as specified and as directed.

Refixing old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Supply and fix Mild steel galvanized steel tubing 15 mm bore with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required , cutting through walls, floors and their making good to match with the existing specifications complete . complete all as specified and as directed.

Taking up or down steel water tubing and connections of 20 mm bore. complete all as specified and as directed.

Refixing old 20mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.). complete all as specified and as directed.

Supply and fix Mild steel galvanized steel tubing 20mm bore with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required , cutting through walls, floors and their making good to match with the existing specifications complete. complete all as specified and as directed.

Supply and fix in repair Bib taps, cast copper alloy,CP with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm bore of pipe brass ferrule but fancy type fixed in repair. complete all as specified and as directed.

supply and fix in repair Pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure 15mm dia bore fixed in repair. complete all as specified and as directed.

supply and fix in repair PVC connections 15 mm size with PTMT nuts of length 450 mm. complete all as specified and as directed.

Supply and fix in repair bib tap standard of PTMT any colour high presure screwed for iron pipe of 15 mm bore ( minimum weight - 90 gms) make Prayag complete all as specified and as directed.

Material and labour for welding in repairs exc 2.5 cm but n. exc 5 cm in length thickness of metal n. exc 6mm. complete all as specified and as directed.

Material and labour for Left and right handles for factory made steel windows. complete all as specified and as directed.

Material and labour for MS stay for factory made steel windows. complete all as specified and as directed.

Material and labour Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Material and labour Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fix Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete complete all as specified and as directed

Supply and fix PVC insulation panels thickness 12mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

Supply and fix 5.5 mm sheet glass glazing with oil putty in square exc 0.5 sq. m in each pane Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor but of brass body and tongue with hard drawn steel spring (Overall length of cover plate 140mm) fixed in repairs etc complete complete all as specified and as directed

Supply and fix door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Providing and fixing factory made uPVC white colour sliding winfow. Three track made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber, Frame (88m x 52mm), sliding interlock (one vertical length in each shutters) (45.5mm x 28 mm), Glazing bead(24.5mm x 16mm ) will be mitered cut and fusion welded at all corners, including railling of holes for fixing of hardware and grainage of water etc making arrangement for fixing of hardware, EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : (touch lock of zinc zlloyed white powder, steel roller system, stainless steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and required accessories ( Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accesories. net opening will be measured for payment purpose.but area n exc 2.00 sqm each

All as per item no 58 but area exc 2.00 sqm each complete all as specified and as directed.

M/S P.K Nag Choudhury