Replacement of damaged doors in KKC, Tirumala

Demolition doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architarves, holdfasts and other attachments etc., complete and stacking them within 100 metres lead. -do- not exceeding 3 Sqm in Area

-do- Exceeding 3 Sqm in Area

Demolishing and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete up to 15cm thickness

Demolishing and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete more than 15cm thickness

Dismantling, clearing away and carefully stacking materials useful for re-use, terracing work in roofs or floors

Dismantling, clearing away and carefully stacking materials useful for re-use, do - flat stones in roof or floors including lifting

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational,incidengal,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including Ordinary soil-Manual means upto 3m depth. Note: Cost of dewatering may be added, where required, upto 5% of labour cost. Assement for dewatering shell be made as per site condition

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Conveyance of excavated surplus earth / debris to a distance 3 kms from the site of work to the place where specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.

Cement Concrete (1:4:8) using 40 mm ( 0..54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum)nominal size hard broken granite crushed metal from any source conforming to the relevent ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing,machine mixing, cost and conveyance of all materials etc., complete.

Finishing the sides of walls with Ist quality glazed wall tiles of glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

Supply and fixing of 10mm wide PVC edge beading including cost and conveyance of all materials and incidental charges etc., complete.

Flooring with Antiskid floor tiles 1st quality of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

Flooring with vitrified tiles of 1st quality of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, etc., complete - for finished item of work.

Supply and fixing of 30 mm thick Flush door shutters, solid bond wood block board type with commercial ply on both faces conforming to IS:2202 of standard make solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, including cost of screws etc., complete (excluding cost of other fixtures which will be paid separately, but including labour charges for fixing the fixtures).

Supplying and fixing in position Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202 of standard make, with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Double leaf using Best Indian Teakwood frames of size 65 mm x 100 mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6 mm, M.S. Powder coated Butt hinges of 125 x 65 x 2.12 mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. - do - Door Frame section of 45x90 MM . The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member

Providing and fixing 28- 30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Supply of the following Fixtures for Doors and windows

Anodized Aluminium Door Handles (IS:208) 12 mm rod with 150 mm long 3 mm plate of make.

Supply & fixing of Anodized Aluminium Aldrops (IS 2681) 12 mm rod and 250 mm long make

Supply & fixing of Anodized Aluminium Aldrops (IS 2681) 16 mm rod and 300 mm long make

Anodized Aluminum Tower Bolts 10 mm dia X 200 mm Long with ISI Mark IS:204 of make.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 Sqm up to 2.50 sqm.)

Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made. Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.

Supply and laying of 75mm dia single socket PVC/ SWR pipe 6Kg/Sq.cm, Prince/ Sudhakar make or eqality as per ISI standards including Labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any diameter including fixing necessary fittings like bends,plugs, couplers, junctions, tees etc., with solvent jointing as per standard practice..(excluding cost of fixtures such as couplers/ bends/ tees etc)

Supply and laying of 110mm dia single socket PVC/ SWR pipe 6Kg/Sq.cm, Prince/ Sudhakar make or eqality as per ISI standards including Labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any diameter including fixing necessary fittings like bends,plugs, couplers, junctions, tees etc., with solvent jointing as per standard practice..(excluding cost of fixtures such as couplers/ bends/ tees etc)

Supply and laying of 160 mm dia double socket PVC/ SWR pipe 6Kg/Sq.cm, Prince/ Sudhakar make or eqality as per ISI standards including Labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any diameter including fixing necessary fittings like bends,plugs, couplers, junctions, tees etc., with solvent jointing as per standard practice..(excluding cost of fixtures such as couplers/ bends/ tees etc)

Supply of 75 mm dia Plain Bend 87.5 Degree of U.V. resistant UPVC /SWR pipe fitting (as per BIS standards).

Supply of 110mm dia Plain Bend 87.5 Degree U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Door Bend 87.5 Degree of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110mm dia Door Bend 87.5 Degree of U.V. resistant UPVC SWR pipe fitting (as per ISI standards).

Supply of 75 mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75mm dia Single Tee of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110mm dia Single Tee of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia 45 Degree Bend of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110mm dia 45 Degree Bend of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single "Y" of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110mm dia Single "Y" of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap 580mm x 440 mm Hindware/ Parryware/ Neycer - ISI Mark.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hidustan/ parryware make of white glazed with 'P' trap with ISI mark or equivalent approved by the department.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548- 1996

Supply & fixing of PVC low level cistern with internal components & short bend 10 Litres capacity Single Flush

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Supplying and fixing in position 600 x 450 mm size wall mirror with 5 mm thick glass (Saint Gobion) with 6 mm plywood IS 303 bwr (both sides commercial) back in position with 12 mm Aluminium 'U' channel (Jindal make) including cost and conveyance of all materials etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

28.60mm OD Pipe - SDR 13.5

22.20mm OD Pipe - SDR 13.5

Electrical items

Supply and Fixing of ISI Mark 25mm outer dia heavy grade (2.20mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 14/0.3mm (1.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex/ RRKabel/ Havells/ Polycab/ L&T/KEI

Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI. Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five.

Supply and wiring with 3 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI. Grade-A: Modular Switch Makes: LegrandArteor / Schneider Zen cello / Goldmendal / GIFA / L&T englaze / Crabtree- Murano / Amare / Ducor / GM Four-Five.

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-30 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 40 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 20 Amps 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6A, 3-Plate Pilot Ceiling Rose on the existing junction boxes, T.W Board etc., and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Fixing of given Tube light luminaire / PL fitting on wall / Ceiling / Trusses / Channels on PVC/ TW round blocks / Epoxy insulator / 3"x2"x1" TW reaper with all accessories, labour charges and giving necessary connections.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete.

Dismantling of existing fixture's such as 2' /4' tube light fitting / PL fitting/High bay fittings with out causing any damage to the fittings etc., (Note: The dismantled above material are to be returned to concerned section officer by the contractor at his cost)

Dismantling of the existing Ceiling fan / Exhaust fans/ wall mounting fans completely with accessories with out causing any damage to the fixtures etc., (Note: the dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Screen painting on the new existing tube light fittings, ceiling fans, Heaters, AC units etc. indicating TTDs area, location, No.. The size of the letter should be minimum 25 mm. The work will have to be done at site.

Supply and fixing of 12 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete. Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

Supply and fixing of 16 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete. Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

Supply and fixing of 3 mm thick laminated sheet of I.S.I Mark white or approved colour to be fixed with brass screws, cup washers on the existing T.W. Board duly removing the existing damaged Hylum sheet as directed during execution.

Supply and transportation of 90 Watt LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, supply input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, having system efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, IK05, Driver surge protection 4KV, in-house additional surge protection ≥ 5KV with wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.

(a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium)/Halonix/Polycab/Keselec/ HPL/ Jaquar/Eveready / Surya (ORION-II)/ FortuneArrt (UFO-S) /Rhino(GPHB02 Series) (b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG .

Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with ISI Mark. Makes: Crompton / Almounard / Havells Turbo Force/ Halonix Krypton

Supply of Linear LED Batten with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 125 lm/W. System wattage should not exceed 35W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a colour temperature of 6500K and CRI>80, SDCM<5. Driver of the luminaire shall have THD < 10% and PF > 0.95. The luminaire housing should be made of CRCA with a PC glossy diffuser. The driver shall comply to IEC 60598, IEC 62384 , IEC 61347-2-13, IEC 61547, EMI- CISPR15 standards. Make: Philips , Model : BN308C LED 40S-6500 L120 PSU WH /TTD Approved Brands.

Supply, transporatation & installation of size 150mm x 75mm x 3 mm. FRP LADDER TYPE CABLE TRAY with Channel Size:75 x 25 x 3 mm [WITH FRP COVER 3MM THICK, WITH FRP COVER CLIP & ARDWARE SS304] [WITH FRP COUPLER PLATE 200X50X3MM, WITH 4 SET OF M6X25MM HARDWARE SS304] including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete SUMIP MAKE

Rupees One Crore Sixty Four Lakh(s) Forty Four Thousand Eight Hundred Thirty Four And Paise Eighteen Only