SPL REPAIR TO BLDG NO P-25 AT CERTAIN LOCATION OF SAA UNDER GE(S) TEZPUR

Amount

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness, including cover fillets all as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of truss

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction.

M & L for providing Plain Cement Concrete (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in copings, in lintels, cills, plinth courses, string courses,lacing courses, parapets water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

Supply and fix, 35 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed

Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately).

Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed. Note: Shutters obtained from Item No 4 above shall be considered for refixing in same opening

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications.

S&F Powder Coated aluminium frame (minimum thickness of powder coating 50 micron) (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder Coated aluminium window and ventilator shutters (Thickness or powder coating not less than 50 micron), sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified.

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.

S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws.

S&F MS 200mm ordinary pattern door spring including roller and roller plate

S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples

S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including petty repairs material like screws/nails, plug, MS fillet etc in Steel windows etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items).

S& F 4.0 mm thick sheet glass plain ordinary quality and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares.

S& F 4.0 mm thick sheet figured/pin headed glass and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.

M&L for 75 mm thick PCC 1: 3:6 type C2 using 20mm graded crushed stone agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

M & L for 25 mm thick B0 PCC 1:2:4 (12.5mm graded crushed stone aggregate) type 1as sub floor , sub base even and rough to recieve the topping layer on roof /floor all as specified and directed

Demolition of reinforced cement conc of any description and in any position and removal rubbish off the premises complete all as specified and as directed.

M&L for RCC type B1 1:2:4 (20 mm graded crushed stone agg) as slab supported on wall , beams columns in floor, roofs landing and the like

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crankingbinding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed and removal rubbish off the premises as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair complete all as specified and directed.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M&L for three coats of white wash including preparation of new plaster surfaces as in ceiling complete all as specefied and directed.

M&L fo one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall.

M&L for one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down all as specified and directed

M&L for Applying two coats of acrylic distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L for Applying one coat of Acrylic distemper to old wall surfaces of walls and cornices including preparation of old decorative surface and removal of smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L for Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed.

M&L for preparation of newly plaster surface and applying two coats of weather coat over 1 mm thick putty to make surface smooth and one coat of primer damp sheild over newely plastered wall complete all as specefied and directed.

M&L for Old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints as in boundry wall, single , double and triple storey bldg, complete all as specified andas directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coats of weather coat over a coat of polymer (exterior grade) putty to make surface smooth and one coat of primer damp sheild over old plastered wall complete all as specefied and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of till laid over and included 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

M&L for Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of till laid over and including 10mm screeding in Cement mortar 1:3 .

M&L for 20 mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

M&L for Glazed Ceramic tiles 8 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm,, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match the shade of till laid over and including 15mm thick screed bed in CM 1:4.

All as per item No 56 above but in skirting over 10mm thick screeding in cement mortar 1:3

S & F in repair Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S & F in repair Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S & F in repair only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

S & F in repair, 15 mm bore bib taps, cast copper alloy,chromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S & F in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions including dismantling wall tiles and fixing broken tiles with matching colour, area of wall tiles not exceeding 0.50 sqm. all as specified and directed.

S&F in repair 15mm dia angle stop valve fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.

Supply and fix, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including 610 mm long waste pipe etc complete all as specified and directed.

Material and labour, in repair for 75/110 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

Supply & fix in repair stainless steel curtain rod of dia 25 mm with fixing brackets,etc. with two Nos of end knobs complete for doors/window opening all as specified and directed

M&L for Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and 3mm thick APP based Polymeric membrane with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for applying for preparation of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

Supply and fix, in repair, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.

Supply and fix, in repair, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

Supply and fix, in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float 32 mm dia flush pipe and handle including brackets complete all as specified and directed.

Supply and fix, in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor incl dismantling all as specified and directed.

Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor incl dismantling all as specified and directed.

S&F PVC (SWR) with access door bend 110mm dia.

S&F PVC (SWR) with access door bend 75 mm dia.

S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access door .

S&F PVC (SWR) junction single (single 'T') equal or unequal 110mm bore with access door .

S&F PVC (SWR) junction double, (double T), equal or unequal 110mm bore. ISI marked

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L in repair for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent

S&F Solid PVC particle board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site all as spacified and directed

Supply & Fix in repair CP shower rose 125 mm dia with revolving joints and fixed to15 mm GI pipe or unoin all as directed.

S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.

M&L for pre cast RCC (1:2:4) type B1 using 20 mm graded crushed stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly and removal rubbish off the premises complete all as specified and directed

M & L for 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm over solvent based bituminous primer @ 0.25 Lit/Sqm.

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed. Note:- The work shall be executed through authorised manufacturer of product.

Supply & Fix in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 750mm X 600mm X 250mm with three shelf complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.

Taking down main switches and DBs of any type including MCB and make including wooden board / junction box.

M&L for concealed point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated suken terminal box made out of MS sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside,(clear depth of the box not less than 60mm and this shall be increased suitably to accomadiate flush type regulators) concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed for the following :-

All as per item No. 106 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed.

All as per item No. 106 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed.

All as per item No. 106 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and as directed.

Ditto as per Item No 106 above but for one light point controlled by two way switches complete all as specified and as directed.

S&F for switch piano (flush button type) single pole, one way, 5 Amps.

S&F switch flush type, 5 Amps, SP, two way. Make Anchor

S&F switch bell push flush type 5 Amps. Make Anchor

S&F for switch socket Combination 2 in one, 5 Amps, 240 Volts flush type, all as specified.

S&F for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal.

Supply and fix fan regulator electronic, step type

S&F call bell Dingdong type AC 230 Volts single pole.

S&F ceiling rose surface backelite three terminals.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection.

All as item no 119 above but LED batten 9 watt 2 ft long

S&F Decorative wall light fixture made out of polycarbonate, suitable with 7 watt LED Bulb complete all as specified and directed.

S&F on wall security light luminaire for 1x25 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor all as specified.

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades refixing the fan in same position including all electrical connection and material and labour for replacement of two nos split pins, one connection block and one rubber seal all as specified and as directed.

Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamell paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavaties with filler materials,and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end complete all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed

S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed

S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm flush to wall including complete electrical connection by proper size of copper lugs complete all as specified. Note- The cost of cutting wall and making good the disturbed surface by Putty and matching the colour of wall shall deemed to be included in the unit price.

M&L in repair for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed FRLSH copper conductor cable, 1100 Volt, and one run of copper earth wire 6 Sq mm drawn through PVC conduit and all accessories,including cutting chases of exsisting wall, making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

dito as item No-132 but 2 x 4 sqmm + 1 x 4 sqmm earth wire

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core. Note: 1. Excavation and earth work will be measured and paid seperately.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

MISHRA SUPPLY AGENCY (BID ID -3479101)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3483853)

M/S Singh Furniture Mart (BID ID -3483431)

M/S MOHANPASARI (BID ID -3484305)

M/S ROY TRADING (BID ID -3483682)

Chinmay Traders (BID ID -3489121)

V.V.Construction (BID ID -3488981)