Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.2 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹9.3 L+₹12,103 (1.31%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical EMD REFUND |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
12 Nov 2020, 5:00 pmClosed
CHIEF ENGINEER, KSCADC
CHIEF ENGINEER KSCADC 1st Floor, Chalachithra Kalabhavan Building, Vazhuthacaud, Jagathy P.O. Thiruvananthapuram Pin-695014
RIDf XXII- Additional Infrastructure Works in National Institute of Fisheries Administration and Management Centre (NIFAM) Kadungalloore- Electrification(RE-TENDER)
2020_SCADC_382639_3
ET-63/2020-21
Open Tender
Electrical Works
Item Rate
60 days
Kadungalloore, Ernakulam Dist
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,975
₹25,000
22 Feb 2021
5 Nov 2020
17 Nov 2020
5 Nov 2020
12 Nov 2020
5 Nov 2020
Amount
Electrification
1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
od11650/2019_2020 : Supply and Fixing of Bulk Head includig 9 w LED
od11651/2019_2020 : Supply and fixing of Angle holder or pendent type with 9w LED lamp.Including Lamp Shade. (Make:-Anchor or any better approved make(approval should be subitted to department if necessary )
od11652/2019_2020 : street light 40W( Make :Philips, Bajaj, Havells or equivalent pwd apporved make)
od11653/2019_2020 : Supply, installation, testing and commissioning of following exhaust fan in the exisitng opening, including making the hole to suit the size of the above fan, making good damage, connection, testing, commisioning etc. as required. (a) 225 mm metal frame(Make:- Havells/Almonard - light duty or any better approved make(approval should be subitted to department if necessary )
od228062/2019_2020 : Supply of remote control for LED down light wattage and CCT control, Electronic analog dimmable Driver, input operating voltage range 150–275V AC; provided with<br>short circuit protection. remote controller to control Wattage and CCT.
od228063/2019_2020 : Supply, Installation, testing and commissioning of 36 w 2 x 2 LED Down light fitting with remote operable Power and CCT. Complete with connection along with all consumables and complete with all respects.
od11654/2019_2020 : Supply, installation, testing and commisioning of following sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper condutor, single core cable etc. as required. (a) 1200 mm sweep ceiling fan 5 star white shade with stepped type electronic fan regulator (Usha (Striker)/,Crompton(High breeze)/ Havells (Velocity))
od228068/2019_2020 : supply installation testing and commissioning of 15W LED Down light square type surface mount. Color Temperature: 5700K to 6700K<br>Voltage: 160-260 volts; Wattage: 15 watts.<br>Item Code : 111943.0 Type : Vertical Downlight Emitting Colour : White Operating Voltage : 220-240V AC Shape : Square Mounting : Surface Rated Power : 15W<br>
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1.44 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.
od11655/2019_2020 : LIGHT FITTINGS Supply, Installation, Testing & Commissioning of batten type1x20 / 1x21W LED Type Tube Light ALUMINIUM Body BN021 4 FEET design channel light out put on ceiling / wall including connection with 1sq.mm FRLS PVC insulated copper conductor multi stranded three core cable etc.(including lamp) as required (Make Philips,Crompton Greeves.)
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
od11656/2019_2020 : Supplying and fixing following size/ modules, GI box /Plastic surface/recessed box along with modular base & cover plate for modular switches in recess /Surface /Furniture etc as required(C)Information out let RJ 45 Cat 6
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.2.1 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA, TPMCCB
od11657/2019_2020 : Supply installation testing & commissioning of 6Ways Vertical DBs- Provision for TP MCCB as incomer
od11658/2019_2020 : Supply, Installation, testing and commissioning of 40 A to 63 A, TP MCB (C curve), 10 kA breaking capacity
od11659/2019_2020 : 4 way TPN DB- Supply, Installation, testing and commissioning of 4 way TPN DB of the following specification
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
od11660/2019_2020 : Supply of 16 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
od11661/2019_2020 : Supply of 25 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
5.17 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired.
od11662/2019_2020 : Supply ,Laying and clamping of earth strip/wire inclusive of providing earth termination and bracing of termination etc. No 10 CU wire
od11663/2019_2020 : Supply installation testing and commissioning of (a)3 kVA online UPS of the following Specifications : Warranty: 2 year for 3 kVA UPS and 2 year for Batteries, Battery: 12V 26 AH SMF Battery (3 Nos battery set (make: exide or better aproved make ))(MAKE: Emerson Libert, APC(American Power Corporation), GE) PHASE: 1 phase in / 1 phase out. CAPACITY :3000 VA / 2400 W. INPUT:Nominal Voltage 230 V ac, Frequency Range: 40 Hz ~ 70 Hz, Power Factor 0.99 @ 100% load. OUTPUT: Nominal voltage:208/220/230/240VAC, AC Voltage Regulation: ± 1%, Frequency Range (Synchronized Range): 46Hz ~ 54 Hz or 56Hz ~ 64 Hz, Frequency Range (Batt. Mode): 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz, Current Crest Ratio: 3:1 (max.), Harmonic Distortion 3 % THD (Linear Load), 7 % THD (Non-linear Load), Transfer Time: Bypass to Inverter (Line mode) :Zero, Inverter to Bypass (Line mode): 4 ms(Typical), Waveform (Batt. Mode) :Pure Sinewave, EFFICIENCY on AC to AC mode@ 100% load:. 90%, Inbuilt Isolation Transformer :No. BATTERY: Standard Run Model: Battery Type 12V/ 9 AH, Numbers 6 , Typical Recharge Time 4 hours recover to 90% capacity, Charging Current (max.) 1.0 A, Charging Voltage 82.1 VDC ±1%. Long Run Model: Battery Type Depending on the capacity of external batteries, Numbers 6,Charging Current 1.0A/2.0A/4.00.0A, 6.0A default, Float Charging Voltage: "82.1 VDC *1% .INDICATORS:LCD Panel : UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditionsALARM:Battery Mode: Sounding every 4 seconds,Low Battery:Sounding every second,<br>Overload: Sounding twice every second,Fault :Countinously sounding PHYSICAL<br>"Standard Run Dimension: D x W x H (mm) 421 x 190 x 318. Model Net Weight (kgs) 27.6, Long Run Dimension, O x W x H (mm) 282 x 145 x 220, Model* Net Weight (kgs) 7.4, ENVIRONMENT: Operation Humidity and Temperature : 20-90 % RH @ 0- 45°C (non-condensing), Noise Level Less than 50dBA @ 1 Meter, MANAGEMENT<br>Smart RS-232/USB Supports Windows® 00/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC Optional SNMP Power management from SNMP manager and web browser
od11664/2019_2020 : Supply installation testing and commissioning of 0.5 HP Self Priming Water Pump. Product Dimensions: 26 x 15 x 16 cm ; 4.5 Kg, Motor Power: 0.5 Hp, Phase: Single Phase, Power Supply: 220 V, Model Number:Neon -Nh60, Material: Cast Iron, Flow Rate: 1800 Litres Per Minute, (Make: V guard(Neon -Nh60), kirloskar or equivalent aproved make)
od166609/2019_2020 : KSEB METER BOARD.. Fabrication, supply erection testing and commissioning of metering board with dust and vermin,weather proof, made out of 16 swg Powder coated CRCA sheet or equivalent syntex box, The board should be chemically treated and coated with two coats of metal primer and two coats of siemens grey enamel paints. including HRC Fuse link, fuse carrier, HRC cut-off fuse Appro. size.... Provision for three phase meter(KSEB) - 1Sets. including handles , all connecting items fuses etc...
SM Electricals
S J Electricals
Bidder Name
Delstar a Grade Electrical contractors
S J Electricals
SM Electricals
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_566683.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .