BUDGETTED

No. figures

1 Supplying, Installation, Testing and Commissioning of Kirloskar make 1.00 Set 371680.00

Diesel Engine driven fire Hydrant pump set suitable for Automatic

Operation and Consisting of Following : Horizontal type, Centrifugal

end sunction back pull out, top discharge pump of cast iron body &

Bronze impeller with M.S. fabricated common base plate, coupling,

coupling guard, foundation bolts etc. as required.

Model- KFE, Flow - 97 m3/hr, Head - 70 meter, Engine - 39 BHP/3 ph,

Suc X Del - 100 x

2 Providing and Installing of Fully Automatic Sanitary Napkin Incinerator 5.00 Set 39026.40

Machine and Vending Machine with all fittings charge and labour

charges etc. complete as directed by engineer in charge.

3 Providing and fixing Sliding Pleated Mosquito net having standard 6.00 Sq.m. 2869.41

extruded colour anodized aluminum section of premium quality of

section size top and bottom of 50.8 mm x 25.4 mm x 2.0 mm and both

side section of 63.50 mm x 25.4 mm x 2.00 mm with collapsible

mosquito net with Magnet Locking System etc. complete as directed

4 THREE SEATER WAITING SOFA 12.00 No. 14255.14

Providing and Arranging three seater gang seater having seat and

back made from CRCA capcular Tubular frame welded with perforated

Die moulded CRCA sheet base frame made from round Tubular

welded with horizontal beam Two side armrest welded with frame

including finishing metal parts with epoxy polyster powder coating of

50 micron thickness Including all materials and labour etc. complete

as per drawing and instruction of engineer-in charge. 3 Seater S.S.

Gang Seater

5 MEDIUM BACK REVOLVING CHAIR 15.00 No. 6911.43

Providing and fixing Medium back Revolving chair seat and back are

made from 12mm thick hot pressed plywood covered with moulded

cushion and with premium fabric. The back foam should be designed

with contoured lumber support for extra comfort. Foam should be with

45 density. Chair with chrome based five prong stand with nylon

castors. Chairs with Synchrow tilt mechanism of standard make. Chair

size 45 cm x 53 cm of back side and 52 cm x 48 cm seat side. Chair

with scratch and weather resistant arm rest. Chair with permanent

mechanism is designed with 360 revolving type with pneumatic height

adjustment. Complete as directed by Architect and engineer in charge.

6 ROLLER BLINDS 90.00 Sq.m. 4699.53

Providing and fixing the Premium quality roller blinds with sunscreen &

blackout layer of approved colour, design, size etc. The Duplex blind

shall not filters the light into the room. The blind shall operated via a

chain system, alternate strip of dim out & sheer fabrics shall be

aligned to create a full sheer blind. The roller blind shall be installed on

brackets & clamps fixed over the wall or ceiling. The brackets &

clamps shall be made up of high strength alloy or zinc plated mild

steel Including all material, fixtures, screw, nails, labour etc. complete

as directed by Engineer incharge.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

7 Providing MASS RACK 27U 600 mm x 1000 mm with height of 1310 1.00 No. 43963.28

mm Floor Standing Server Rack with Server Tray, Keyboard Tray,

Power Strip 10 Socket, Cable Organizer 1U Closed, 4 Fans &

Hardware Kit - Combo Pack for computer room etc. complete as

directed by EIC.

8 Providing and fixing Fully Glazed Door having aluminum Colour 11.00 Sq.m. 4636.91

anodized section frame 85 mm x 38.10 mm with 5 mm thick frosted

glass with powder coated aluminum fittings fixed on floor spring and

fixtures with silicon sealant etc. complete

9 Providing and fixing safety grill of required pattern for windows/ 967.00 Kg. 109.08

Ventilator / Door using M.S. Polished bars / Pipes / M.S. Angles / Flats

of required spacing as per drawings as design and hold fasting with

coach bolts including one coat of primer and two coats of matt finished

oil painting etc. complete.

TOTAL Rs.

i.e. Rs. Fourteen lacs Eighty Two thousand One hundred Sixty Eight and Ninety Four paisa only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Executive Engineer

R & B Division,