REPAIRS TO CERTAIN INTERNAL ROADS OF VARIOUS UNITS OF AREA II AND III UNDER AGE BR-II AT KAMPTEE

Amount

Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc., by using pressure air ,cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed bituminous macadam, binder and chippings), depth of pot holes exc 30mm using paving bitumen complete all as specified and as directed.

Material & Labour for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm with bitumen grade VG-10 on unsurfaced water bound macadam using mechanical sprayer , complete all as specified and directed.

M&L for premix bituminous macadam of 75mm thick or less (consolidated thickness ) laid/rolled and compacted to required gradient and camber using binder content (paving bitumen)of 4% by weight of total mix complete all as specified and directed.

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a tack coat with bituminous primer using paving bitumen @ 5 kg per 10 Sqm with bitumen grade VG-10 on unsurfaced water bound macadam using mechanical sprayer & 40 mm thick premixed asphaltic semi dense concrete ( consolidated thickness) with 5.5% binder content (minimum) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller, complete all as specified and directed. Note: - (i) The work shall be executed by using hot mix plant and mechanical sprayer. (ii) The work should be executed by using hot mix plant and mechanical paver.

M&L for painting lines, dashes, arrows etc, by applying 2.5mm thick thermoplastic road marking compound of white/ yellow of approved make and shade for road marking, n. exc 10 cm width on bitumenous roads/pavements or on concrete surfaces using,'Hot processor Plant' complete all as specified as directed and as per manufacturer instructions. Note: - Road marking paint shall be applied with mechanical equipment only.

S&F regular delineators made out of MS pipe of 75mm dia with powder coating/stove enamelled, 120 cm long with 3 Nos 100 mm wide prismatic/commercial AVERY DENISON 3M USA grade reflective sheeting colour coding as approved and provided with reinforced mesh, as per manufacturer's instructions, with & including necessary earthwork's cement concrete as in foundation/ filling etc.,as in repairs, complete all as specified and directed.

S&F solar road studs pf size 125mm x 125mm x 20mm aluminium alloy & polycarbonate stud (Red/yellow LEDs) 3+3 LED's with shank in tough aluminium diecast body with stem , complete as per MOST/IRC specifications and manufacturer’s instructions, as in repairs, complete all as specified and directed.

M A Builders

M/S BHARAT CONSTRUCTIONS

Meet Road Lines

M/s T.S.JOHAR

Bidder Name

Meet Road Lines

M/s T.S.JOHAR

M A Builders

M/S BHARAT CONSTRUCTIONS

vidhamal&sons