CIVIL WORK

Amount

Providing of steel stair case for Escape Route in Control Room situated at SLDC Complex, BBMB, Chandigarh

Dismantling concrete: (e) Reinforced cement concrete. Pb-CSR-Ref.-8.6(e)-L/R

Cement concrete 1:2:4 (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref.-10.13(a)(i)-T/R

Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a) For single rebate. Pb-CSR-Ref.-18.29(a)-T/R

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects Pb-CSR-Ref.-18.10-T/R

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. Pb-CSR-Ref.-18.4-T/R

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40m x 40mm x 6mm and flat iron 40mmx6mm as hand rail complete in all respects. Pb-CSR-Ref.-18.30-T/R

Applying priming coat with metal primer on new steel or iron work including preparation of surface. Pb-CSR-Ref.-16.20-T/R

Painting two or more coats with aluminium paint to give an even shade excluding priming coat. Pb-CSR-Ref.-16.25-T/R

Replacement of damaged steel covers of water meters installed in Resi.& Non-Resi. Buildings, replacement of damaged steel chowkhats of quarters and renovation of office bathroom of Director/Power Regulation situated on first floor at SLDC Complex, BBMB, Chandigarh.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref.-30.95-L/R

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. Pb-CSR-Ref.-30.94-L/R

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (a) European/ Indian/ Orissa WC. Pb-CSR-Ref.-30.88(a)-L/R.

(b) PVC/ China ware cistern. Pb-CSR-Ref.-30.88(b)-L/R.

(c) Wash Hand basin/ Urinal Pot. Pb-CSR-Ref.-30.88(c)-L/R.

(e) CP Bib cock/ Angle cock/ Stop cock. Pb-CSR-Ref.-30.88(e)-L/R.

(g) Bathroom accessories such as soap dish, Towel rail, Towel ring, Towel bracket, Mirror, Toilet paper holder, Seat cover Jet pressure and all other accessories. Pb-CSR-Ref.-30.88(g)-L/R.

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self-cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg). Pb-CSR-Ref.-30.79 (a)-T/R.

Dismantling ,disjointing, removal of G.I. Pipe lines, specials, valves and fittings complete in all respects. (a) 15 mm internal diameter pipe line. Pb-CSR-Ref.-28.63(a)-L/R.

Providing, laying jointing fixing & testing ISI marked GI pipes (as per IS 1239) B- class premium make such as (Jindal Hissar) including cost of specials (such as tee. Bends , sockets, elbows etc ) painting with anti-corrosive bitumastic paint, testing cutting threading inside building complete. (a) 15 mm i/d. Pb-CSR-Ref.-28.35(a)-T/R

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. Pb-CSR-Ref.-11.3 (i) T/R

Centring & shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Pb-CSR-Ref.-9.8-T/R.

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete. Pb-CSR-Ref.-18.17-T/R.

Providing and fixing in position C.P. Brass, bottle trap 32mm dia. with 40mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect. Pb-CSR-Ref.-30.44-T/R.

Providing and fixing 15 mm C.P. Brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge) complete in all respect. (b) Laboratory cock swan neck two way. Pb-CSR-Ref.-30.68(b)-T/R.

Providing and fixing in position towel rails/ ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (a) C.P. Brass towel rails 15mm dia 610 mm long. Pb-CSR-Ref.-30.58 (a)-T/R

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. Pb-CSR-Ref.-30.80-T/R.

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. (ii) C.P. brass Bib cock foam flow without flange Pb-CSR-Ref.-30.65-A(ii)-T/R

Cement concrete 1:2:4 (a) with stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref.-10.13(a)(i)-T/R.

Cutting chase in brick walls in cement or in floor for embedding G.I.or C.I.pipes line and making good the same to its original condition. (a) Size 75 mm x 75 mm. Pb-CSR-Ref.-30.85(a)-L/R.

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. Pb-CSR-Ref.-14.88-T/R.

Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete white cement slurry in joints including corners angles and beading . Pb-CSR-Ref.-14.72-T/R.

Providing and fixing 1st quality ceramic glazed wall tiles Matt /Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pb-CSR-Ref.-14.129-T/R.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.) Pb-CSR-Ref.-30.4-T/R.

Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect. Pb-CSR-Ref.-30.100-T/R.

Providing and fixing jet spray with 2’.6”long PVC pipe. (a) With CP brass nut. Pb-CSR-Ref.-30.8(a)-T/R.

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. Pb-CSR-Ref.-30.60-T/R.

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge) complete in all respect. (b) Acrylic liquid soap container. Pb-CSR-Ref.-30.67(b)-T/R.

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. Pb-CSR-Ref.-30.15-T/R.

Providing and fixing in position C.P. Brass Urinal button flusher 15 mm of approved make (to the approval of Engineer-in-charge). Pb-CSR-Ref.-30.36-T/R.

Providing and fixing partition for different type of urinals. (i) Chittor Black Slabs 19-20mm thick marble partition size 375mm x 750mm. Pb-CSR-Ref.-30.21-A(i)-T/R.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (ix) Size 560mm x 450mm (Under counter oval). Pb-CSR-Ref.-30.31(ix)-T/R

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers andS/S Studs on top complete in all respect (as required by the Engineer-in- Charge). (c) Size 1500 mm x 600 mm or any other size. Pb-CSR-Ref.-30.61(c)-T/R.

Providing and fixing in position stop cock/ angle valve of approved make (to the approval of engineer-in-charge) complete in all respect. (c) CP Brass 15mm Angle valve without flange. Pb-CSR-Ref.-30.66(c)-T/R.

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. Pb-CSR-Ref.-30.64-A-T/R

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut. Pb-CSR-Ref.-30.72(b)-T/R.

Scraping: (a) White wash and colour wash. Pb-CSR-Ref.-8.31(a)-L/R.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. Pb-CSR-Ref.-16.65-T/R.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed. Pb-CSR-Ref.-16.12-T/R.

Renewing glass panes with putty and nails wherever necessary. (c) Frosted glass panes weighing 8.44 Kg/sqm. Pb-CSR-Ref.-31.5(c)-T/R

REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01. (ii) Wiring light point. Pb-CSR-Ref.-34.08(ii)-T/R.

(iv) Wiring 6Amp.wall socket point. Pb-CSR-Ref.-34.08-(iv)-T/R.

Wiring 16/20Amp. power plug control point. ( Pb-CSR-Ref.-34.08 vi ) T/R

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c) Tees angles & channels. Pb-CSR-Ref.-18.1(c)-T/R.

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. (b) Doors and windows frame of size 113mmx 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.Pb-CSR-Ref.-18.24(b)-T/R.

(d) Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter. Pb-CSR-Ref.-18.24(d)-T/R.

PLASTERING & POINTING: 12.5 mm thick cement plaster 1:4. Pb-CSR-Ref.-15.9-T/R

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3,true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C). Pb-CSR-Ref.-34.16-A(ii)-T/R.

(vii) MCB Double Pole 40amp. (10kA, Curve-C). Pb-CSR-Ref.-34.16-A(vii)-T/R.

Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-(c) Cable End Box for SPN 12 Way. Pb-CSR-Ref.-34.17(xvii)(c)-T/R.

The Vasudev Cooperative Labour & Construction Society Ltd Shahabad

ss coop lc society Ltd