Air Conditioning works for setting up of two conference halls and one waiting room and for adding one more partition for bifurcating and prepares the planning section after dismantling the existing portion in the vacated space in the first floor of t

Amount

od285800/2023_2024 : Supply and fixing good quality of factory made powder coated MS frames<br>(condensor stand) with all required accessories including suitable size anchor bolts, anti vibration pads etc for mounting the out door unit of AC in position as required suitable for 1.5TR

90.6.10.2 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm

od285806/2023_2024 : Supply, installation, testing and commissioning of wall mounting type 4 kVA<br>voltage stabilizer with input voltage range of 170 V - 270 V and having features of<br>high power efficiency, intelligent time delay system, Low & High voltage cut-off<br>protection, built-in thermal overload protection, LED indications etc suitable for<br>single phase 1-Ton / 1.5-Ton air conditioner unit with three years warranty and<br>three months replacement guarantee. (Make: V-Guard/ Philips/ Voltas/ Crompton Greaves/Godrej/ Microtek)

od285807/2023_2024 : Supply and installation Soft drawn bright annealed copper pipes of 0.8mm thickness(suction and discharge) covered with sleeve type insulation of OEM approved make insulation of minimum 10 mm thick completely wrapped with monsoon tape shall be fixed on walls with Aluminium straps with necessary brazing, pressure testing suitable for 1.5 TR machines

od285808/2023_2024 : Supply , installation, testing and commissioning of fully charged(top-up as per site requirement) – 1.5TR BEE Five Star Rated, High Wall Split Air conditioning unit(suitable for commercial/industrial use) fitted with variable Frequency Drive Inverter compressor(Dual Inverter or equivalent ) operating on either R32 refrigerants, complete with indoor and out door units comprising of blowers, motors, bluefin/gold fin copper cooling tube coil and bluefin/gold fin copper condenser tube coil. The machine should be high wall mounter capable of Dust filtering, cooling, dehumidifying, air circulating . The package shall have microprocessor control with cordless remote, refrigerant, electric cable of ISI mark interconnected control cable (2.5sq.mm or suitable size) from indoor to outdoor units, , copper pipe and thermal insulation up to 3.5 M with 13mm nitrile rubber insulation, with UV proofing, heavy duty PVC drain pipe, and unit should be suitable for long copper pipe length more than 20 Mtr (distance between outdoor & unit) as required with two year on-site warranty and free service in every three months during warranty period, minimum 5 year compressor warranty, PCB replacement guarantee for first two years and warranty for minimum 5 years. Make: - General/Hitachi/Daikin/ Mitusubhi/Voltas/Carrier/Panasonic/Blue Star)

od285811/2023_2024 : Charges for additional making additional holes using CORE Cutting in RCC Beams or Side walls of thickness upto 50cm at height above 3 meters on floor level above ground floor using extra labour for carrying, setting up scaffolding, dismantling of machines and for making holes in circular shape having diameter 30 mm to 100 mm using core cutting tool, including removal of debris, cleaning of location as per engineer's direction. The rate is inclusive of tools and drilling bits . Minimum rate for drilling a single hole excluding rate in od115_P220216/2021_2022

od285812/2023_2024 : CORE Cutting in RCC Beams or Side walls of thickness upto 50cm at height above 3 meters on floor level above ground floor using extra labour for carrying, setting up scaffolding, dismantling of machines and for making holes in circular shape having diameter 30 mm to 100 mm using core cutting tool, including removal of debris, cleaning of location as per engineer's direction. The rate is inclusive of tools and drilling bits . Minimum rate for drilling a single hole

90.9.1.1 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.50x50xmm cable management system with base and lid

90.9.1.2 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. External angle 90 degree

90.9.1.3 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.flat angle 90 degree /Tee

90.9.1.4 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. internal angle 90 degree

90.9.1.5 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.internal coupler

90.9.1.7 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

90.9.1.8 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. flanged coupler

90.9.1.9 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.joint cover

90.6.5.19 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.5 sqmm

90.10.3.23 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 16A 3 pin plug top

SREEJITH S G

Bidder Name

SREEJITH S G

GEEKEY COOLING SOLUTIONS