Composite work (Civil, Electrical and S&T) involving Construction of Inspection bay line with pre engineering building (PEB)/Structural steel shed including pit line, cover shed, service buildings, inspection pit line, track work, road work, Drainage work, Electrification and illumination works, Retractable OHE and Signaling and Telecommunication work in connection with setting up of maintenance facilities for trains sets Phase -III at Sabarmati on Western Railway.

Description:- Earthwork (USSOR Items 2021) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-DSR Item 2023 284381540.93 Above/ Please see Item Breakup for details. 418208148.42 (-) 32.00 284381540.93 Below/P

Description:- DSR Items 2023 S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () C-Steel Work (DSR-2023) 183778189.74 Above/ Please see Item Breakup for details. 270262043.74 (-) 32.00 183778189.74 Below/P

Description:- Steel Work (DSR-2023) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () D-NS Items 322563717.70 CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ Please see Item Breakup for details. 322563717.70 AT Par 322563717.70 Below/P

Description:- NS Items S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () E-Steel Woek (USSOR-2021) 6539987.73 Above/ Please see Item Breakup for details. 10156837.60 (-) 35.61 6539987.73 Below/P

Description:- Steel Work (USSOR-2021) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () F-P-Way Work (USSOR-2021) 46500905.64 Above/ Please see Item Breakup for details. 49643328.32 (-) 6.33 46500905.64 Below/P

Description:- P-Way Work (USSOR-2021) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () G-Supply of Ballast (USSOR-2021) 15361134.12 Above/ Please see Item Breakup for details. 23437800.00 (-) 34.46 15361134.12 Below/P

Description:- Supply of Ballast (USSOR-2021) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () H-Electrical General 40512201.00 Above/ Please see Item Breakup for details. 1622436.00 AT Par 1622436.00 Below/P

Description:- Supply, fabrication, installation, testing & Commissioning LT panel I/C-2x800A 4- poleACB, O/G-4x400 A MCCB, 4x250A MCCB, 4 x125A MCCB & 4x63 A MCCB. Above/ Please see Item Breakup for details. 656036.00 AT Par 656036.00 Below/P

Description:- Supply, fabrication, installation, testing & Commissioning of LT Panel I/C-2x400 4-pole MCCB, O/G- 4x250A 4-pole MCCB, 4x125A 4-pole MCCB, 4 x63A 4-pole MCCB. Above/ Please see Item Breakup for details. 1822144.00 AT Par 1822144.00 Below/P

Description:- Supply, fabrication, installation, testing & Commissioning of LT Panel consisting- Incoming 2 x 250A 4-pole MCCB & Out going -6x125A 4-pole MCCB & 2 x 63 A 4-pole MCCB. Above/ Please see Item Breakup for details. 1651352.00 AT Par 1651352.00 Below/P ar

Amp. As per part No. SI/LHB/CSA/00/CAB housed in stainless steel housing of size 3 ft x 2 ft x 2ft with one contector AC 3 series 370 Amp 415V AC coil to on / off set fixing stand to be cement concret foundation. Above/ Please see Item Breakup for details. 1496016.00 AT Par 1496016.00 Below/P ar 5 Description:- Supply, installation, testing and commissioning of Double ended jumper plug assembly with 10 Mtr. Polyamid conduit and copper 120 sq mm cable for phase and 95 sq mm for neutral for LHB type coupler. Above/ Please see Item Breakup for details. 249240.00 AT Par 249240.00 Below/P ar 6 CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- Supply, fabrication, installation, testing & Commissioning of Distribution board consisting- Incoming 1 x 125 A 4-pole MCCB & Out going - 8 x 63 A , 4 pole MCB, 2x20A DP MCB . Above/ Please see Item Breakup for details. 68120.00 AT Par 68120.00 Below/P

Description:- Supply installation, Testing & commissioning of 400A feeder pillar. Above/ Please see Item Breakup for details. 105126.00 AT Par 105126.00 Below/P

Description:- Supply installation, Testing & commissioning of 250 Amp feeder pillar. Above/ Please see Item Breakup for details. 2918682.00 AT Par 2918682.00 Below/P ar 9 Description:- Supply, fixing, testing & commissioning of Battery charge/discharge unit Input Voltage : 415 V AC, 50 HZ, output Voltage : 110 V DC - 155 V DC, output current : 0-300 A as per RDSO's specifications Above/ Please see Item Breakup for details. 69180.00 AT Par 69180.00 Below/P

Description:- Fabrication, supply, fixing & commissioning of 110V battery charging terminals. (EFT) Above/ Please see Item Breakup for details. 69180.00 AT Par 69180.00 Below/P

Description:- Fabrication, supply, fixing & commissioning of welding terminals. Above/ Please see Item Breakup for details. 585480.00 AT Par 585480.00 Below/P ar 12 Description:- Supply, installation, testing & commissioning of 3 phase, 415 V 63 A, heavy duty plug-socket socket complete with 63 Amp 3-pole MCCB and 20A ray roll plug and Socket with 20A DP MCB in M.S. enclosure. Above/ Please see Item Breakup for details. 46720.00 AT Par 46720.00 Below/P

Description:- Supply, installation, testing & commissioning of 20 W LED fitting with 110 V, AC operated. Above/ Please see Item Breakup for details. 7556.00 AT Par 7556.00 Below/P

Description:- Supply, installation, testing & commissioning of step down transformer 440/110 V AC

Above/ Please see Item Breakup for details. 558700.00 AT Par 558700.00 Below/P

Description:- Digging of cable trench 450 x 1000 mm & refilling as per Specification. Above/ Please see Item Breakup for details. 403700.00 AT Par 403700.00 Below/P

Description:- Digging of cable trench 450 x 1000 mm in RCC/PCC/hard soil. Above/ Please see Item Breakup for details. 396200.00 AT Par 396200.00 Below/P ar 17 Description:- Transportation, Laying,Installation , terminating, testing and commissioning of LT/HT cable of sizes Core 1/2/3/4 x 10 sqmm to core 1/2/3/4 x 400 sqmm in existing trench, pipe or on structure. Above/ Please see Item Breakup for details. 17172.00 AT Par 17172.00 Below/P

Description:- Supply, installation, testing & Commissioning of LT/HT cable route marker. Above/ Please see Item Breakup for details. 316200.00 AT Par 316200.00 Below/P ar 19 Description:- Supply and laying of RCC half round pipe 100 mm ID & 1 mtr length. CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ Please see Item Breakup for details. 95200.00 AT Par 95200.00 Below/P

Description:- Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length. Above/ Please see Item Breakup for details. 421640.00 AT Par 421640.00 Below/P

Description:- Supply, installation, testing and commissioning of HDPE pipe 110 mm nominal dia 6.2 mm thickness as per IS 4984-1995. Above/ Please see Item Breakup for details. 808500.00 AT Par 808500.00 Below/P ar

machine the bore shall be 150mm dia and shall be done at the depth of minimum 1.5meter or as requirement of site from the ground level this include insertation of 110mm dia 7mm thickness HDPE pipe . Above/ Please see Item Breakup for details. 148560.00 AT Par 148560.00 Below/P

Description:- Supply, transportation, installation, testing & Commissioning of SDB Switch board consisting- Incoming 1 x 63 A 4-pole MCB & Out going -8 x 32 DP MCB , 12 x 16 A SP MCB . Above/ Please see Item Breakup for details. 68110.00 AT Par 68110.00 Below/P

Description:- Supply, installation, testing & commissioning of Distribution board having incoming-

Above/ Please see Item Breakup for details. 1112790.00 AT Par 1112790.00 Below/P ar 25 Description:- Supply,installation, testing & commissioning of 5mtr long hot dip galvanised octagonal poles with 130 mm bottom & 70 mm top made up of 3mm thick steel sheet along with base plate of size 200x200x12mm with foundation. Above/ Please see Item Breakup for details. 504812.00 AT Par 504812.00 Below/P

Description:- Supply, installation, testing & commissioning of 70 system watt LED street light fitting. Above/ Please see Item Breakup for details. 17160.00 AT Par 17160.00 Below/P ar 27 Description:- Supply, installation, testing & commissioning of surface wiring of light, fan and call bell point with modular switch by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi- strand single core in PVC casing caping and accessories. Above/ Please see Item Breakup for details. 1270.00 AT Par 1270.00 Below/P ar 28 Description:- Supply, installation, testing & commissioning of surface wiring of plug point 6 Amps with modular switch on same board by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC casing caping and accessories Above/ Please see Item Breakup for details. 2946.00 AT Par 2946.00 Below/P ar 29 Description:- Supply, installation, testing & commissioning of surface wiring of modular plug point 16/6 Amps with modular switch on separate board by 3 nos. 4.0 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC casing caping and accessories. Above/ Please see Item Breakup for details. 8400.00 AT Par 8400.00 Below/P ar 30 Description:- Supply, erection, testing & commissioning of surface wiring of sub-main from board to board and room to room with 3 nos. 2.5 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. Above/ Please see Item Breakup for details. 8000.00 AT Par 8000.00 Below/P ar 31 CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- Supply, erection, testing & commissioning of surface wiring of sub-main from board to board and room to room with 3 nos.4.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. Above/ Please see Item Breakup for details. 6320.00 AT Par 6320.00 Below/P ar 32 Description:- Supply, erection, testing & commissioning of surface wiring of sub-main from board to board and room to room with 3 nos.6.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. Above/ Please see Item Breakup for details. 1356.00 AT Par 1356.00 Below/P ar 33 Description:- Supply, erection, testing & commissioning of wiring of 2 way light point with modular switch by 4 nos. 1.5 sq mm FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe/ casing caping. Above/ Please see Item Breakup for details. 1680.00 AT Par 1680.00 Below/P

Description:- Supply and providing musical call bell. Above/ Please see Item Breakup for details. 106950.00 AT Par 106950.00 Below/P

Description:- Supply,installation, testing and commissioning of ceiling fans including hooks, clamps, nuts & bolts etc. Above/ Please see Item Breakup for details. 1848.00 AT Par 1848.00 Below/P

Description:- Supply, fixing, testing & commissioning of serface type modular electronic fan regulator. Above/ Please see Item Breakup for details. 31579.00 AT Par 31579.00 Below/P

Description:- Supply, installation, testing & commissioning of 10/20 W LED bulk head fitting with

Above/ Please see Item Breakup for details. 145880.00 AT Par 145880.00 Below/P ar 38 Description:- Supply, installation, testing and commissioning of Concealed wiring of light, fan and call bell point with Modular switch by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi- strand single core in PVC conduit pipe & Conduit pipe accessories. Above/ Please see Item Breakup for details. 32010.00 AT Par 32010.00 Below/P ar 39 Description:- Supply, installation, testing and commissioning of Concealed wiring of plug point 6 Amps3 pin with Modular switch on same board by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC conduit pipe & Conduit pipe accessories . Above/ Please see Item Breakup for details. 36300.00 AT Par 36300.00 Below/P ar 40 Description:- Supply, erection, testing & commissioning of Concealed wiring of plug point 16 Amps

single core in PVC conduit pipe & Conduit pipe accessories. Above/ Please see Item Breakup for details. 178600.00 AT Par 178600.00 Below/P

Description:- Supply, erection, testing & commissioning of concealed wiring with 3 nos. 2.5 sq mm sub-main FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe. Above/ Please see Item Breakup for details. 142600.00 AT Par 142600.00 Below/P

Description:- Supply, installation, testing and commissioning of concealed wiring of sub-main with

Above/ Please see Item Breakup for details. 70500.00 AT Par 70500.00 Below/P ar 43 CAO-C-ADI-ENGINEERING/WESTERN RLY 43 Description:- Supply, erection, testing & commissioning of concealed wiring of sub-main from board to board and room to room with 3 nos.6.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. Above/ Please see Item Breakup for details. 18720.00 AT Par 18720.00 Below/P ar 44 Description:- Supply, erection, testing & commissioning of concealed wiring of sub-main from board to board and room to room with 5 nos.10.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe. Above/ Please see Item Breakup for details. 26796.00 AT Par 26796.00 Below/P

Description:- Supply, installation, testing and commissioning of concealed 100W modular fan regulator. Above/ Please see Item Breakup for details. 27760.00 AT Par 27760.00 Below/P

Description:- Supply, installation, testing and commissioning of exhaust fan 300 mm complete with all accessories. Above/ Please see Item Breakup for details. 254507.00 AT Par 254507.00 Below/P

Description:- Supply, installation, testing & commissioning of 1x (18-20) W LED tube fittings . Above/ Please see Item Breakup for details. 236544.00 AT Par 236544.00 Below/P

Description:- Supply and providing recess mounted LED Fitting- (36@45&41@ W , 2x2 sq ft with flexible, 3-core, multistrand copper conductor, PVC insulated & sheathed wire of required size. Above/ Please see Item Breakup for details. 252360.00 AT Par 252360.00 Below/P

Description:- Supply, installation, testing & commissioning of Corrosion proof LED fitting (Capsule type fitting) suspended, surface type-2 x (18 to 20)W LED tube fittings . Above/ Please see Item Breakup for details. 1353600.00 AT Par 1353600.00 Below/P ar 50 Description:- Supply, installation, testing and commissioning of 3 nos.4.0 sq mm FRLS PVC copper conductor, multi-strand single core in Suface/Recessed Steel conduit (including Conduit pipe & accessories) as required for Cover shed wiring. Above/ Please see Item Breakup for details. 72000.00 AT Par 72000.00 Below/P ar 51 Description:- Supply, installation, testing and commissioning of 3 nos.4.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping/ PVC conduit and accessories for Cover shed wiring. Above/ Please see Item Breakup for details. 58500.00 AT Par 58500.00 Below/P

Description:- Supply, installation, testing and commissioning of 16 sqmm aluminium conductor PVC insulated and sheathed catenary wire. Above/ Please see Item Breakup for details. 863000.00 AT Par 863000.00 Below/P

Description:- Supply, installation, testing and commissioning of 600mm sweep air circulator fan including mounting accessories. Above/ Please see Item Breakup for details. 59655.00 AT Par 59655.00 Below/P

Description:- Supply and providing switch board of suitable size having 16/6A plug socket with 16A switch and two Nos. 6A switch. Above/ Please see Item Breakup for details. 97400.00 AT Par 97400.00 Below/P

Description:- Supply, installation, testing & commissioning of junction box CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ Please see Item Breakup for details. 4946050.00 AT Par 4946050.00 Below/P

Description:- Supply, installation, testing & commissioninog of LED Light fitting 250 watt complete with accessories. Above/ Please see Item Breakup for details. 124280.00 AT Par 124280.00 Below/P

Description:- Supply, installation, testing & commissioninog of LED Light fitting 90 Watt complete with accessories. Above/ Please see Item Breakup for details. 129816.00 AT Par 129816.00 Below/P

Description:- Supply, installation, testing & commissioninog of LED focus Light fitting 3 0 Watt complete with accessories. Above/ Please see Item Breakup for details. 17403.00 AT Par 17403.00 Below/P

Description:- Supply, installation, testing & commissioning of Auto control of portal light light Distribution board having Time switch , contactor and MCB . Above/ Please see Item Breakup for details. 78880.00 AT Par 78880.00 Below/P

Description:- Supply and providing 50mm dia UPVC Pipe. Above/ Please see Item Breakup for details. 80310.00 AT Par 80310.00 Below/P

Description:- Supply,installation, testing & commissioning of Pipe earthing. Above/ Please see Item Breakup for details. 26640.00 AT Par 26640.00 Below/P

Description:- Supply,installation, testing & commissioning of 8 SWG G.I. earth Wire. Above/ Please see Item Breakup for details. 943200.00 AT Par 943200.00 Below/P

Description:- Supply, fabrication, installation, testing & Commissioning of MS cable tray. Above/ Please see Item Breakup for details. 299744.00 AT Par 299744.00 Below/P ar

complete with all accessories, motor starter, and base plate of cap.36 LPS Discharge on 10 mtrs. Head (approx. 10 HP/7.5 KW) complete with automation control panel, Flate cable ( cooper) , suction & delivery pipes, clamps etc Above/ Please see Item Breakup for details. 450500.00 AT Par 450500.00 Below/P

Description:- Providing FL Mast 20 mtrs Above/ Please see Item Breakup for details. 101054.00 AT Par 101054.00 Below/P

Description:- Foundation for FL mast. Above/ Please see Item Breakup for details. 382920.00 AT Par 382920.00 Below/P

Description:- Supply, installation, testing & commissioninog of LED Light Flood light fitting 250 W on high mast and other location, complete with all accessories. Above/ Please see Item Breakup for details. 394840.00 AT Par 394840.00 Below/P

Description:- Supply,installation, testing & commissioning of 5 star invertor split type Air conditioning unit of 1.5 ton capacity complete with all accessories for mounting of AC unit. Above/ Please see Item Breakup for details. 8056.00 AT Par 8056.00 Below/P ar 69 CAO-C-ADI-ENGINEERING/WESTERN RLY 69 Description:- "Supply, erection, testing & commissioning of :- Concealed wiring of plug point 20 Amps with Modular switch by 3 nos.4.0 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC conduit pipe & Conduit pipe accessories for AC & Geyser " Above/ Please see Item Breakup for details. 6060.00 AT Par 6060.00 Below/P

Description:- Dismantling & stacking of Rail /Tubular pole with removal of O/H lines Above/ Please see Item Breakup for details. 5206.00 AT Par 5206.00 Below/P

Description:- Excevation of all kind of soil (except Rock) and filling back the excavated earth as per Specification. Above/ Please see Item Breakup for details. 24920.00 AT Par 24920.00 Below/P

Description:- Excevation of Hard soil (Stone/Rock/RCC) and filling back the excavated earth as per Specification. Above/ Please see Item Breakup for details. 19260.00 AT Par 19260.00 Below/P

Description:- Supply, installation, testing & commissioning of Straight through Jointing Kit of size 4x70-95 Sq mm Above/ Please see Item Breakup for details. 21008.00 AT Par 21008.00 Below/P

Description:- Supply, installation, testing & commissioning of Straight through Jointing Kit of size 4x120-150 Sq mm Above/ Please see Item Breakup for details. 16102.00 AT Par 16102.00 Below/P

Description:- Supply, testing and demonstration of maintenance staff tool boxes complete Above/ Please see Item Breakup for details. 131316.00 AT Par 131316.00 Below/P

Description:- Supply , erection, fixing, testing & commissioning of stainless steel body water cooler

Above/ Please see Item Breakup for details. 8623.00 AT Par 8623.00 Below/P

Description:- Supply of clip on meter Above/ Please see Item Breakup for details. 5931.00 AT Par 5931.00 Below/P

Description:- Supply of earth tester Above/ Please see Item Breakup for details. 2502.00 AT Par 2502.00 Below/P

Description:- Supply of insulation tester Above/ Please see Item Breakup for details. 4596.00 AT Par 4596.00 Below/P

Description:- Supply of 8 feet ladder Above/ Please see Item Breakup for details. 29436.00 AT Par 29436.00 Below/P

Description:- Supply and providing 11 KV , ISI mark rubber matting of size; 1Mtr width & 2.5 mm thick. Above/ Please see Item Breakup for details. 9144.00 AT Par 9144.00 Below/P

Description:- Supply of Self supporting Aluminium ladder -15 feet. Above/ Please see Item Breakup for details. 46697.00 AT Par 46697.00 Below/P

CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- Supply, testing and commissioning of RMPU maintenance ladder. Above/ Please see Item Breakup for details. 5784800.00 AT Par 5784800.00 Below/P

Description:- Design, Engineering, Supply, installation, testing and commissioning of solar light pipes of 750mm Dia with all accerssories for lighting as per tender specification. Above/ Please see Item Breakup for details. 398200.00 AT Par 398200.00 Below/P

Description:- Design, Supply, erection, testing and commissioning of wall/hanging/ floor mounted type LED signage/ direction board in half elleptical/ Parabolic/Triangular shape. Above/ Please see Item Breakup for details. 1479150.00 AT Par 1479150.00 Below/P ar Description:- PIT LIGHTING: Design, fabrication, supply, erection, testing and commissioning of LED based luminary having input voltage 40V -72V AC, frequency 50/60 Hz, input power - 16W with IP67

luimens/Watt and with proper ON/OFF and locking arrangements. The luminaries shall be designed in such a way to luminate the underframe of the coach and path lighting of pit line. The cubical shall be fabricated with MS sheet/polycarbonate body with high built of epoxy coating, heat resestive upto

GOLDWIN Limited or equivalent. Make shall be as per T.S. Above/ Please see Item Breakup for details. 3276000.00 AT Par 3276000.00 Below/P ar Description:- CAT WALK LIGHTs: Design, fabrication, supply, erection, testing and commissioning of

supply with all connected accessories and proper ON/OFF and locking arrangements. The luminaries should be ingress protection IP 67 and impact protection IK 10. The cubical shall be fabricated with MS sheet/polycarbonate body with high built of epoxy coating, heat resestive upto 70 degree centigrade complete with weather proof and rust proof. Fixture shall be IR-GOLD-CI of M/s GOLDWIN Limited or equivalent. Make shall be as per T.S. Above/ Please see Item Breakup for details. 652096.00 AT Par 652096.00 Below/P ar

Phase, natural air cooled, coper wound Auto Transformer as per IS in a Weather proof enclosure (with support structure) with input and Output MCB protection, input and output terminal block and indicator Above/ Please see Item Breakup for details. 274368.00 AT Par 274368.00 Below/P ar

earthing arrangement (Chemical Earthing with low impedance corrosion resistant and long life)Earth electrod is made up of high tensile low corbon steel cercular rods bonded with copper on outer serface and interconnection of earth electrod with suitable size copper strip.the earth electrod shall be of minimum 17.0 mm diameter & 3.66 mtr legth as per details given TS S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () I-Electrical TRD 174338191.40 Above/ Please see Item Breakup for details. 164934.00 AT Par 164934.00 Below/P

Description:- 1(a)-Preparation of designs and drawings for overhead equipment and verification of purchaser's pegging plan, SED,CSD. Above/ Please see Item Breakup for details. 2340.00 AT Par 2340.00 Below/P

Description:- 8(a)(xii)-Marking/Painting of temperature & 'Y'-Measurement of OHE mast at BWA locations Above/ Please see Item Breakup for details. 40074.00 AT Par 40074.00 Below/P

Description:- 8(b)(i) Supply without insulator and erection of material for termination of Single conductor of Over Head Equipment or terminating wire CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ Please see Item Breakup for details. 130548.00 AT Par 130548.00 Below/P

Description:- 9(dz) Supply without insulator and erection of anti-creep with Cadmium copper catenary wire in polluted area Above/ Please see Item Breakup for details. 47592.00 AT Par 47592.00 Below/P

Description:- 11(a)(i) Supply without Insulator and erection of cut-in (9 Tonne) Insulator Above/ Please see Item Breakup for details. 39492.00 AT Par 39492.00 Below/P

Description:- 11(a)(ii) Supply without Insulator and erection of a suspension (9 Tonne) Insulator Above/ Please see Item Breakup for details. 29880.00 AT Par 29880.00 Below/P

Description:- 11(b) Supply without Insulator and erection of 25 kV Post Insulator Above/ Please see Item Breakup for details. 187286.00 AT Par 187286.00 Below/P

Description:- 27(a) Supply, Erection, oil-filtration, testing and commissioning of L.T. supply transformers (10 kVA) Above/ Please see Item Breakup for details. 158904.00 AT Par 158904.00 Below/P

Description:- 31(a) Transfer of equipment from one mast or support to another Above/ Please see Item Breakup for details. 40404.00 AT Par 40404.00 Below/P

Description:- 31(d) Dismantling of Over Head Equipment Above/ Please see Item Breakup for details. 12376.00 AT Par 12376.00 Below/P

Description:- 31(gz) Dismantling of a Section Insulator Assembly Above/ Please see Item Breakup for details. 4786.00 AT Par 4786.00 Below/P

Description:- 31(i) Dismantling of an Isolator Above/ Please see Item Breakup for details. 9132.00 AT Par 9132.00 Below/P

Description:- 31(j)Dismantling of a Post / Pedestal Insulator Above/ Please see Item Breakup for details. 2148.00 AT Par 2148.00 Below/P

Description:- 37(a)Unloading of all types of Copper & Aluminium conductors Above/ Please see Item Breakup for details. 2148.00 AT Par 2148.00 Below/P

Description:- 37(b) Loading of all types of Copper & Aluminium conductors Above/ Please see Item Breakup for details. 828231.00 AT Par 828231.00 Below/P

Description:- 32 -Erection under Power Block Above/ Please see Item Breakup for details. 5266800.00 AT Par 5266800.00 Below/P

Description:- 2(b) Concrete for foundation and plinth In other than hard soil and rock Above/ Please see Item Breakup for details. 1408296.00 AT Par 1408296.00 Below/P ar 18 Description:- 3(b)(i) Supply & erection of fabricated and galvanised structures (O, N & R type portals) with all necessary components other than masts CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ Please see Item Breakup for details. 6051660.00 AT Par 6051660.00 Below/P

Description:- 3(b)(ii) Supply and erection of structure steel (traction masts) fabricated and galvanised of all type: B-Series Mast Above/ Please see Item Breakup for details. 920400.00 AT Par 920400.00 Below/P

Description:- 3(b)(iii) Supply and erection of special fabricated and galvanised steel structures other than portals & traction masts not covered under items 3(b)(i) & 3(b)(ii) Above/ Please see Item Breakup for details. 245472.00 AT Par 245472.00 Below/P

Description:- 3(e)(i) Supply and erection of a Guy Rod Assembly Above/ Please see Item Breakup for details. 76950.00 AT Par 76950.00 Below/P

Description:- 3(i) Supply and erection of 25kV Caution Board / Number Plate Above/ Please see Item Breakup for details. 1625712.00 AT Par 1625712.00 Below/P

Description:- 4(a)(i) Supply without insulator and erection of Single bracket assembly Above/ Please see Item Breakup for details. 75460.00 AT Par 75460.00 Below/P

Description:- 4(a)(ii) Extra on 4(a)(i) for supporting two OHEs Above/ Please see Item Breakup for details. 11954.00 AT Par 11954.00 Below/P

Description:- 4(b)(i) Supply without insulator and erection of a pull off arrangement for one OHE Above/ Please see Item Breakup for details. 1167480.00 AT Par 1167480.00 Below/P

Description:- 8(a)(v) Supply and erection of Regulating Equipment (3-Pulley type) with counter weight assembly for conventional/composite OHE Above/ Please see Item Breakup for details. 281220.00 AT Par 281220.00 Below/P

Description:- 8(b)(ii) Supply without Insulator and erection of materials for termination of Double conductor Above/ Please see Item Breakup for details. 163152.00 AT Par 163152.00 Below/P

Description:- 16(a)(i) Supply and erection of a structure bond Above/ Please see Item Breakup for details. 51540.00 AT Par 51540.00 Below/P

Description:- 16(b) Supply and erection of a longitudinal bond Above/ Please see Item Breakup for details. 89760.00 AT Par 89760.00 Below/P

Description:- 16(c) Supply & erection of a transverse and special bond Above/ Please see Item Breakup for details. 25392.00 AT Par 25392.00 Below/P

Description:- 17(a) Supply & erection of a single earth electrode Above/ Please see Item Breakup for details. 3216.00 AT Par 3216.00 Below/P

Description:- 17(E) Supply and erection of 8 SWG G.I. wire for earthing Above/ Please see Item Breakup for details. 563112.00 AT Par 563112.00 Below/P

CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- 30(b)(iv) Supply and erection of anti-monkey menace. Above/ Please see Item Breakup for details. 1320830.00 AT Par 1320830.00 Below/P

Description:- 6(az) Supply and erection of Over Head Equipment only Above/ Please see Item Breakup for details. 135000.00 AT Par 135000.00 Below/P

Description:- 10(az)Extra on item 6(a) for supply and erection of additional fittings at a turn-out, diamond crossing or overlap Above/ Please see Item Breakup for details. 503271.00 AT Par 503271.00 Below/P

Description:- 12(az) Supply without Insulator & erection of a Section Insulator Assembly Above/ Please see Item Breakup for details. 442152.00 AT Par 442152.00 Below/P

Description:- 13(a) Supply without Insulator and erection of a 25 kV single pole isolator without earth contact assembly Above/ Please see Item Breakup for details. 46272.00 AT Par 46272.00 Below/P

Description:- 13(d) Extra for supply & erection of an earth contact assembly in an isolator Above/ Please see Item Breakup for details. 267282.00 AT Par 267282.00 Below/P

Description:- 15(e) Supply of materials and erection of large copper jumper 160 Sq. mm between cross feeder and OHE Above/ Please see Item Breakup for details. 12648.00 AT Par 12648.00 Below/P

Description:- 17(d) Supply and erection of copper strips for equipment earthing. Above/ Please see Item Breakup for details. 199095.00 AT Par 199095.00 Below/P

Description:- 26(a)(ii) Supply & erection of Solid copper bus-bars 18mm. Above/ Please see Item Breakup for details. 37944.00 AT Par 37944.00 Below/P

Description:- 26(c) (i) Supply & erection of solid copper bus-bar connectors: Bus terminal (RI-6310) Above/ Please see Item Breakup for details. 82764.00 AT Par 82764.00 Below/P

Description:- 26(c) (ii) Supply & erection of solid copper bus-bar connectors: Bus splice (RI-6320) Above/ 4axi 132.00 Each 4311.00 569052.00 AT Par 569052.00 Below/P

Description:- Supply of InsulatorsStay Arm Porcelain (CD-1050 mm) Above/ 4axiii 26.00 Each 3511.00 91286.00 AT Par 91286.00 Below/P

Description:- Supply of Insulators Stay Arm Composite (CD-1600 mm) Above/ 4axiv 132.00 Each 4136.00 545952.00 AT Par 545952.00 Below/P

Description:- Supply of Insulators Bracket Porcelain (CD-1050 mm) Above/ 4axvi 26.00 Each 3527.00 91702.00 AT Par 91702.00 Below/P

Description:- Supply of Insulators Bracket Composite (CD-1600 mm) Above/ 8bxi 13.00 Each 5673.00 73749.00 AT Par 73749.00 Below/P

CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- Supply of 9-Tonne insulatorsPorcelain (CD-1050 mm) Above/ 8bxiii 30.00 Each 3520.00 105600.00 AT Par 105600.00 Below/P

Description:- Supply of 9-Tonne insulators Composite (CD-1600 mm) Above/ 9axiii 12.00 Set 7040.00 84480.00 AT Par 84480.00 Below/P

Description:- Supply of 9-Tonne insulators Composite (CD-1600 mm) Above/ 11axi 18.00 Each 5673.00 102114.00 AT Par 102114.00 Below/P

Description:- supply of 9-Tonne insulator Porcelain (CD-1050 mm) Above/ 11bx 24.00 Each 7398.00 177552.00 AT Par 177552.00 Below/P

Description:- Supply of 25 kV Post Insulator Above/ 12axi 9.00 Set 14006.00 126054.00 AT Par 126054.00 Below/P

Description:- Porcelain 9-Tonne (CD-1050 mm) & Sectioning Insulator Above/ 13ax 9.00 Set 19231.00 173079.00 AT Par 173079.00 Below/P

Description:- Supply of Post & Operating rod insulators for item 13(a) Above/ 12239371 E62 1.20 Kilometre 146872460.40 AT Par 146872460.40 Below/P 7.00 ar

Overhead Conductor-rail System (ROCS) of overall length 1200m including transition arrangement from Retractable OHE to conventional OHE including all accessories as per site requirement, ISS & IE rules and technical specification completed in all respect. Unit taken Kilometre read as TKM. Above/ Please see Item Breakup for details. 87762.00 AT Par 87762.00 Below/P

Description:- Preparation, design, supply and installation of OHE Sectioning Diagram Board of Approximate size 900 mm X 1500 mm Above/ Please see Item Breakup for details. 181104.00 AT Par 181104.00 Below/P

Description:- Supply of Antibird disc on insulator end fitting Above/ Please see Item Breakup for details. 13100.00 AT Par 13100.00 Below/P

Description:- Supply of Nylon/plastic Net- High density polyethelene (HDPE) monofilament netting type-III, UV stabilized s per IS 16008(Part-2)-2016/PVC Virgin HDPE Net Preferably in black colour. Above/ Please see Item Breakup for details. 73160.00 AT Par 73160.00 Below/P

Description:- Supply of 10 KVA Change over panel as per RDSO spec. suitable for 10 KVA AT supply Above/ Please see Item Breakup for details. 10000.00 AT Par 10000.00 Below/P

Description:- Tree Trimming / cutting Above/ Please see Item Breakup for details. 153210.00 AT Par 153210.00 Below/P

Description:- Making of Horizontal boring to track formation below 2 metres from formation label suitable for inserting of 200 mm dia HDPE / DWC pipe. Above/ Please see Item Breakup for details. 81000.00 AT Par 81000.00 Below/P ar 62 CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- Erection of Additional contact wire piece across RRA clamp with supply & erection of

Above/ Please see Item Breakup for details. 53190.00 AT Par 53190.00 Below/P

Description:- Transportation of Railway supply materials/Released material from Railway depots/work site to Work site/Scrap depot Above/ Please see Item Breakup for details. 9022.00 AT Par 9022.00 Below/P

Description:- Dismantling & removal of existing Auxiliary transformer with DO fuse Above/ Please see Item Breakup for details. 15696.00 AT Par 15696.00 Below/P

Description:- Dismantling & removal of Regulating Equipment Complete set Above/ Please see Item Breakup for details. 14820.00 AT Par 14820.00 Below/P

Description:- Dismantling & removal of Cantilever Assembly along with insulator Above/ Please see Item Breakup for details. 73510.00 AT Par 73510.00 Below/P

Description:- Dismantling & removal of Mast, portal, TTC & other small part steel Above/ Please see Item Breakup for details. 85064.00 AT Par 85064.00 Below/P

Description:- Breaking of concrete foundation of Masts, portals & TTC Above/ Please see Item Breakup for details. 7140.00 AT Par 7140.00 Below/P

Description:- Dismantling & removal of Guy rod assembly Above/ Please see Item Breakup for details. 10738.00 AT Par 10738.00 Below/P

Description:- Supply of SPS for joint of Double Stay Insulator Assembly 35 mm Dia ( Material SGCI Grade 400/15 Galvanized ) Above/ Please see Item Breakup for details. 27612.00 AT Par 27612.00 Below/P

Description:- "Supply of 9 ton & BT insulator joint assembly (length 170 mm Dia 80 mm slotted holes. Material SGCI Grade 400/15 Galvanized.)" Above/ Please see Item Breakup for details. 72480.00 AT Par 72480.00 Below/P

Description:- Supply of Large Parallel clamp for 160SQ MM (jumper)/107SQ MM contact wire OR catenary 65 SQ MM Above/ Please see Item Breakup for details. 41440.00 AT Par 41440.00 Below/P

Description:- Digging of trench in normal soil Above/ Please see Item Breakup for details. 51940.00 AT Par 51940.00 Below/P

Description:- Digging of trench in hard soil Above/ Please see Item Breakup for details. 37800.00 AT Par 37800.00 Below/P

Description:- Cable laying Above/ Please see Item Breakup for details. 2212.00 AT Par 2212.00 Below/P ar 76 Description:- Cable rout marker CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ Please see Item Breakup for details. 36400.00 AT Par 36400.00 Below/P

Description:- Half round RCC Pipe 100 mm Above/ Please see Item Breakup for details. 15690.00 AT Par 15690.00 Below/P

Description:- Supply & Erection of HDPE pipe 110 mm Above/ Please see Item Breakup for details. 8364.00 AT Par 8364.00 Below/P

Description:- LT junction box for AT supply Above/ F1 1.00 Numbers 29682.00 29682.00 AT Par 29682.00 Below/P

Description:- Pull lift machine 3 tonne pulling capacity and 3 tonne lifting capacity Make Tracel Tirfer India Pvt Ltd or similar Above/ F2 1.00 Numbers 29438.00 29438.00 AT Par 29438.00 Below/P

Description:- Pull lift machine 5.2 tonne pulling capacity and 3.2 tonne lifting capacity Make Tracel Tirfer India Pvt Ltd or similar Above/ F3 1.00 Numbers 18149.00 18149.00 AT Par 18149.00 Below/P

Description:- Pull lift machine 1.5 tonne pulling capacity and 2 tonne lifting capacity Make Tracel Tirfer India Pvt Ltd or similar Above/ F4 4.00 Numbers 12189.00 48756.00 AT Par 48756.00 Below/P

Description:- Earthing discharge rod complete. Above/ F5 2.00 Numbers 16874.00 33748.00 AT Par 33748.00 Below/P

Description:- Aluminium straight ladder (9.3 m) with hook on top. Above/ F6 1.00 Numbers 50555.00 50555.00 AT Par 50555.00 Below/P

Description:- Aluminium folding ladder (11 m) with hook on top. Above/ F7 1.00 Numbers 8257.00 8257.00 AT Par 8257.00 Below/P

Description:- Portable electric drill machine 21mm, single phase 230 Volt ( for drilling rails for bonding). Above/ F8 1.00 Numbers 6402.00 6402.00 AT Par 6402.00 Below/P

Description:- Contact wire cutter 36". Above/ F9 1.00 Numbers 5590.00 5590.00 AT Par 5590.00 Below/P

Description:- Dropper wire cutter 12". Above/ F10 1.00 Numbers 8765.00 8765.00 AT Par 8765.00 Below/P

Description:- Single sleeve pully block 3 1/2" x 1/2" groove steel. Above/ F11 1.00 Numbers 2112.00 2112.00 AT Par 2112.00 Below/P

Description:- Contact wire twist cum bender 6" Above/ F12 1.00 Numbers 1055.00 1055.00 AT Par 1055.00 Below/P

CAO-C-ADI-ENGINEERING/WESTERN RLY Description:- Steel sling 1m long, eye at each end 19 mm dia. Above/ F13 1.00 Numbers 1247.00 1247.00 AT Par 1247.00 Below/P

Description:- Steel sling 2m long, eye at each end 19 mm dia. Above/ F14 1.00 Numbers 1467.00 1467.00 AT Par 1467.00 Below/P

Description:- Steel sling 3m long, eye at each end 19 mm dia. Above/ F15 1.00 Numbers 1842.00 1842.00 AT Par 1842.00 Below/P

Description:- Steel sling 4m long, eye at each end 19 mm dia. Above/ F16 1.00 Numbers 5452.00 5452.00 AT Par 5452.00 Below/P

Description:- Steel sling 5m long, eye at each end 19 mm dia. Above/ F17 1.00 Numbers 982.00 982.00 AT Par 982.00 Below/P

Description:- Fabric metric tape 30 mtr long 15 mm wide each. Above/ F18 1.00 Numbers 5715.00 5715.00 AT Par 5715.00 Below/P

Description:- Engineering ratchet with socket set Above/ F19 1.00 Numbers 8220.00 8220.00 AT Par 8220.00 Below/P

Description:- Digital Earth tester (0-20/200/2000) with complete accessories, Make - MOTWANE or equivalant Above/ F20 1.00 Set 1991.00 1991.00 AT Par 1991.00 Below/P

Description:- Screw driver set consisting of 6", 8", !2", 16" & 18" Above/ F21 1.00 Set 687.00 687.00 AT Par 687.00 Below/P

Description:- Insulated cutting plier (12") & (8") Above/ F22 1.00 Set 7737.00 7737.00 AT Par 7737.00 Below/P

Description:- Sprit level (12") & (6") Above/ F23 1.00 Numbers 25403.00 25403.00 AT Par 25403.00 Below/P

Description:- Tensometer IDT-10 Ton capacity. Above/ F24 1.00 Numbers 21595.00 21595.00 AT Par 21595.00 Below/P

Description:- Hydraulic crimping tool. Above/ F25 1.00 Numbers 48853.00 48853.00 AT Par 48853.00 Below/P

Description:- Bench grinder (Double end pedeswtal) Motor driven. Above/ F26 1.00 Numbers 2500.00 2500.00 AT Par 2500.00 Below/P

Description:- 50W LED flood light IP65 rating Above/ F27 1.00 Numbers 9647.00 9647.00 AT Par 9647.00 Below/P

Description:- Syren covering distance one kilometer (Electric). CAO-C-ADI-ENGINEERING/WESTERN RLY Above/ F28 1.00 Numbers 4637.00 4637.00 AT Par 4637.00 Below/P

Description:- High Beam (Range 1 km) rechargeable 15W LED torch Above/ F29 1.00 Numbers 2349.00 2349.00 AT Par 2349.00 Below/P

Description:- D' Spanner double ended 24 sizes in a set of 12 pieces Gedore make or equivalent Above/ F30 1.00 Numbers 5389.00 5389.00 AT Par 5389.00 Below/P

Description:- Ring spanner double ended 24 sizes in a set of 12 pieces Gedore make or any other substantially equipment make. Above/ F31 1.00 Numbers 5082.00 5082.00 AT Par 5082.00 Below/P

Description:- Portable fire extinguisher capacity 4.5 Kg DCP type. Above/ F34 1.00 Set 619500.00 619500.00 AT Par 619500.00 Below/P

Description:- Supply of Automatic Capacitance & TAN DELTA Test Kit along with all assessories and features as per detailed specification enclosed Above/ F35 7.00 Numbers 19468.00 136276.00 AT Par 136276.00 Below/P

Description:- Supply of Binocular having magnification (X):- 10-22, Objective Dia 50mm Make - NIkonACULON A211 ZOOM, Model 10-22x50 or similar In bushnell, Wildlife, Olympus, celestron Above/ F36 3.00 Numbers 76156.00 228468.00 AT Par 228468.00 Below/P ar

of wornout bearing and bush with new setup baring and bush with hydraulic cylinder and hydraulic pump as per specification i.e overall length 400 mm, ram travel 75 mm to 100 mm, height of equipment 553 mm with cylinder fitted, width 150 mm with 06 nos. accessories S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () J-Telecom 4785563.00 Above/ Please see Item Breakup for details. 2131292.00 AT Par 2131292.00 Below/P

Description:- Supply of Telecom material Above/ Please see Item Breakup for details. 2654271.00 AT Par 2654271.00 Below/P

Description:- Excution of Telecom Work

In all conditions and classifications of cum soil except rock

Manufacturing of blanketing material cum by wet mixing of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. Total 32895942.30 Schedule Schedule B-DSR Item 2023 Item- 2 DSR Items 2023 S No. Item No Description of Item Unit Qty Rate Amount 1.0 CARRIAGE OF MATERIALS By Mechanical Transport including 1.1 loading, unloading and stacking 1.1.2 Earth 1 1.1.2.5 5km cum 13620 326.68 4449381.6 2.0 EARTH WORK 2.1S General CAO-C-ADI-ENGINEERING/WESTERN RLY Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 2.1 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2 2.1.1 All kinds of soil Sqm 16715 129.85 2170442.75 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in 2.6 width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in- charge. 3 2.6.1 All kinds of soil cum 26294 177.5 4667185 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm 2.8 on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 4 2.8.1 All kinds of soil. cum 6750 260.3 1757025 Excavating trenches by mechanical/manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and 2.10 then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 2.10.1 All kinds of soil 2.10.1.2 Pipes, cables etc. exceeding 80 mm Metre 1102 352.15 388069.3 5 dia. but not exceeding 300 mm dia 2.10.1.3 Pipes, cables etc. exceeding 300 mm Metre 700 549.75 384825 6 dia but not exceeding 600 mm 2.25 Filling available excavated earth cum 13498 196 2645608 (excluding rock) in trenches, plinth, sides of foundations etc. in layers not 7 exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. Extra for every additional lift of 1.5 m 2.26 or part thereof in excavation / banking excavated or stacked materials. 8 2.26.1 All kinds of soil cum 10600 126.8 1344080 2.27 Supplying and filling in plinth with cum 4630 2123.75 9832962.5 sand under floors, including watering, 9 ramming, consolidating and dressing complete. Supplying chemical emulsion in 2.34 sealed containers including delivery as specified. CAO-C-ADI-ENGINEERING/WESTERN RLY 2.34.1 Chlorpyriphos/ Lindane emulsifiable Litre 220 234.75 51645 10 concentrate of 20% Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL 2.35 anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the 2.35.1 vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% Metre 190 38.9 7391 11 with 1% concentration Along the external wall below concrete or masonry apron using 2.35.2 chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% Metre 240 53.45 12828 12 with 1% concentration Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including 2.35.3 drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% Sqm 760 310.05 235638 13 with 1% concentration 4.0 CONCRETE WORK 4.1S CEMENT CONCRETE (CAST IN SITU) Providing and laying in position cement concrete of specified grade 4.1 excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 1:1 1/2:3 (1 Cement: 1 1/2 coarse cum 125.4 8340.85 1045942.59 sand (zone-III) derived from natural 14 sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 4.1.6 1:3:6 (1 Cement : 3 coarse sand cum 4008.85 7178.75 28778531.94 (zone-III) derived from natural sources 15 : 6 graded stone aggregate 40 mm nominal size derived from natural sources) Centering and shuttering including 4.3 strutting, propping etc. and removal of form work for : 4.3.1 Foundations, footings, bases for Sqm 2408 392.15 944297.2 16 columns 4.10S DAMP-PROOF COURSE 4.10 Providing and laying damp-proof Sqm 93.6 410.85 38455.56 course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse 17 sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) CAO-C-ADI-ENGINEERING/WESTERN RLY 4.13 Providing & applying a coat of Sqm 93.6 146.15 13679.64 residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp 18 proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 4.14S MISCELLANEOUS 4.17 Making plinth protection 50 mm thick Sqm 104 749.3 77927.2 of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 19 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 5.0 REINFORCEMENT CEMENT CONCRETE 5.9S FORM WORK Centering and shuttering including 5.9 strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of Sqm 10613 392.15 4161887.95 20 columns, etc. for mass concrete 5.9.2 Walls (any thickness) including Sqm 20732 842.5 17466710 21 attached pilasters, buttresses, plinth and string courses etc. 5.9.3 Suspended floors, roofs, landings, Sqm 936 927.25 867906 22 balconies and access platform 5.9.5 Lintels, beams, plinth beams, girders, Sqm 1629.6 736.4 1200037.44 23 bressummers and cantilevers 5.9.6 Columns, Pillars, Piers, Abutments, Sqm 2470.4 961.3 2374795.52 24 Posts and Struts 5.12S PRE-CAST RCC Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ),reinforced with 1.6 mm dia mild 5.18 steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 25 5.18.2 40 mm thick Sqm 195 1706.55 332777.25 5.33S DESIGN MIX CONCRETE CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 5.33 9103 to accelerate / retard setting of concrete, to improve durability and w o r k a b i l i t y without impairing s t r e n g t h ; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: 5.33.1 All works upto plinth level 5.33.1.1 Concrete of M25 grade with minimum cum 10357.38 9504.75 98444307.56 26 cement content of 330 kg /cum All works above plinth level upto floor 5.33.2 V level 5.33.2.1 Concrete of M25 grade with minimum cum 2408 9860.4 23743843.2 27 cement content of 330 kg /cum 5.35 Add for using extra cement in the Quintal 4888.62 733.5 3585802.77 28 items of design mix over and above the specified cement content therein. 6.0 MASONRY WORK 6.26S EXPOSED BRICK WALL Brick work with non modular fly ash bricks conforming to IS:12894, class 6.34 designation 10 average compressive strength in super structure above plinth level up to floor V level in : 6.34.2 Cement mortar 1:6 (1 cement : 6 cum 670 8752.55 5864208.5 29 Coarse sand) 8.0 CLADDING WORK 8.1S General Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture 8.2 laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, 8.2.2 Cherry/Ruby red 30 8.2.2.1 Area of slab upto 0.50 sqm Sqm 67.6 5413.5 365952.6 31 8.2.2.2 Area of slab over 0.50 sqm Sqm 114.4 5136.3 587592.72 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to 8.3 edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 32 8.3.2 Granite work Metre 332 510.95 169635.4 CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and fixing cramps of required size & shape in RCC/ CC /Brick masonry backing with cement mortar 1:2 (1 cement :2 coarse sand), 8.7 including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 33 8.7.1 Gunmetal cramps Kg 85.8 723.45 62072.01 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick 8.8 masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 8.8.1 Wedge expansion type 34 8.8.1.2 Fastener with threaded dia 10 mm Each 52 40 2080 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and 8.10 embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 35 8.10.2 Granite Stone of approved shade Sqm 5.2 4051.85 21069.62 8.20S STONE WORK DRY CLADDING 8.31 Providing and fixing Ist quality Sqm 4915.2 1267.95 6232227.84 ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- 36 Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9.0 WOOD AND P.V.C. WORK 9.1S FRAMES AND TRUSSES Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast 9.1 lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 37 9.1.2 Sal wood cum 1.3 116520.3 151476.39 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st 9.20 class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. CAO-C-ADI-ENGINEERING/WESTERN RLY 9.20.1 35 mm thick including ISI marked Sqm 46.8 3473.85 162576.18 38 Stainless Steel butt hinges with necessary screws 9.23 Extra for providing lipping with 2nd Sqm 46.8 462.35 21637.98 class teak wood battens 25 mm 39 minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 9.40S MISCELLANEOUS-WOOD WORK Providing and fixing M.S. grills of required pattern in frames of windows 9.48 etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 40 9.48.1 Fixed to steel windows by welding Kg 2100.8 219.1 460285.28 COPER OXIDISED MILD STEEL 9.57S FITTINGS (COPPER OXIDISED AS PER IS: 1378) Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt 9.57 hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) 41 9.57.1 125x65x2.12 mm Each 63 55.75 3512.25 42 9.57.2 100x58x1.90 mm Each 8 48.2 385.6 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, 9.63 (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 43 9.63.1 250x10 mm Each 21 83.9 1761.9 44 9.63.3 150x10 mm Each 3 59.45 178.35 Providing and fixing ISI marked oxidised M.S. door latches conforming 9.65 to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) 45 9.65.1 300x20x6 mm Each 21 98.35 2065.35 Providing and fixing ISI marked oxidised M.S. handles conforming to 9.66 IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 46 9.66.1 125 mm Each 42 39.95 1677.9 47 9.66.2 100 mm Each 6 32.55 195.3 9.72S BRASS FITTINGS 9.82 Providing and fixing bright finished Each 21 121.65 2554.65 48 brass hanging type floor door stopper with necessary screws, etc. complete. 9.83 Providing and fixing aluminium die Each 21 1124.85 23621.85 cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on 49 the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 9.105S GYPSUM BOARD PARTITIONS Providing and fixing to existing door 9.122 frames. CAO-C-ADI-ENGINEERING/WESTERN RLY 9.122.1 30 mm thick Glass Fibre Reinforced Sqm 5.2 3720.75 19347.9 Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow 50 rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 10.0 STEEL WORK 10.1S General Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and 10.6 outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm Sqm 24 3653.2 87676.8 51 thick top cover 10.7 Providing and fixing ball bearing for Each 210 492.35 103393.5 52 rolling shutters. 10.17 Providing and fixing M.S. fan clamp Each 58 226 13108 type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in 53 R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. 10.18 Providing and fixing circular/ Each 58 220.65 12797.7 Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, 54 top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 11.0 FLOORING 11.23S STONE FLOORING Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in- charge, over 20 mm (average) thick 11.23 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 55 11.23.5 Udaipur green marble Sqm 65 2428.6 157859 11.26S KOTA STONE FLOORING CAO-C-ADI-ENGINEERING/WESTERN RLY Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of 11.26 the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 56 11.26.1 25 mm thick Sqm 50 1948.25 97412.5 11.27 Kota stone slabs 20 mm thick in risers Sqm 13 2354.7 30611.1 of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) 57 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.37S CERAMIC GLAZED TILES 11.38 Providing and laying Ceramic glazed Sqm 23.4 1315.3 30778.02 floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, 58 laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid 11.41 on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 59 11.41.2 Size of Tile 600x600 mm Sqm 1722 1553.45 2675040.9 60 11.41.4 Size of Tile 1000x1000 mm Sqm 954.2 2089.65 1993944.03 12.0 ROOFING 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 12.38 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 61 12.38.1 100 mm diameter Each 1560 362.85 566046 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type 12.41 A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 62 12.41.2 110 mm diameter Metre 3115 377.4 1175601 CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS 12.42 : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.5 Bend 87.5 degree 63 12.42.5.2 110 mm bend Each 274 150.35 41195.9 12.42.6 Shoe (Plain) 64 12.42.6.2 110 mm Shoe Each 58 131.85 7647.3 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel 12.47 rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.47.1 2 mm thick corrugated (2.5" or 4.2" Sqm 1000 1401.35 1401350 65 or 6") or step-down (2" or 3" or 6" ) as specified CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to 12.52 form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.52.1 GI Metal Ceiling Lay in plain Tegular Sqm 101.4 1902.95 192959.13 edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having 66 galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS d e s i g n a t i o n 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss 12.65 members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). CAO-C-ADI-ENGINEERING/WESTERN RLY 12.65.6 0.91 mm Aluminium color coated Sqm 2520.6 2335.45 5886735.27 profile with center to center pitch of 175 mm, depth of 46 mm, top crest 67 width of 41 mm, bottom valley width of 80 mm, overall profile width of 1144 mm, cover width 1050 mm. 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 68 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 1375.4 347.05 477332.57 69 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 7320 333.35 2440122 13.3 20 mm cement plaster of mix : 70 13.3.1 1:4 (1 cement: 4 fine sand) Sqm 1040 471.35 490204 13.16S 6 mm CEMENT PLASTER 13.16 6 mm cement plaster of mix : 71 13.16.1 1:3 (1 cement : 3 fine sand) Sqm 1001 300.45 300750.45 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of 13.41 approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over Sqm 2376.4 185.65 441178.66 and including water thinnable priming 72 coat with cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth 13.46 exterior paint of required shade : 13.46.1 New work (Two or more coat applied Sqm 6627 160.6 1064296.2 @ 1.67 ltr/10 sqm over and including 73 priming coat of exterior primer applied @ 0.90 litre/10 sqm) Finishing with Deluxe Multi surface paint system for interiors and 13.48 exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Sqm 700 170.7 119490 Surface Paint to give an even shade. Two or more coat applied @ 0.90 74 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Painting with silicon & acrylic emulsion based water thinnable 13.51 sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : 75 13.51.2 Two coats Sqm 2320 161.7 375144 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's 13.52 specifications including appropriate priming coat, preparation of surface, etc. complete. 76 13.52.2 On concrete work Sqm 24000 235.15 5643600 CAO-C-ADI-ENGINEERING/WESTERN RLY 13.76 Forming groove of uniform size from Metre 1300 100.6 130780 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminium channels of appropriate 77 size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 13.80 Providing and applying white cement Sqm 2376.4 156.05 370837.22 based putty of average thickness 1 mm, of approved brand and 78 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means 15.2 including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix cum 3550 2434.25 8641587.5 79 (including equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 2450 3551.25 8700562.5 mechanical means including stacking of steel bars and disposal of 80 unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal 15.7 of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 81 15.7.4 In cement mortar cum 400 2060.2 824080 15.18 Dismantling steel work in built up Kg 142000 5.65 802300 sections in angles, tees, flats and channels including all gusset plates, 82 bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 15.21 Extra for dismantling trusses, rafters, kg per 800 .85 680 purlins etc. of steel work for every metre 83 additional height of one metre or part height thereof beyond 5 metres. Dismantling roofing including ridges, hips, valleys and gutters etc., and 15.28 stacking the material within 50 metres lead of: 84 15.28.1 G.S. Sheet Sqm 1050 164.95 173197.5 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead 15.45 caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in- charge: 85 15.45.1 Up to 150 mm diameter Metre 1000 332.4 332400 16.0 ROAD WORK 16.1S ROADS CAO-C-ADI-ENGINEERING/WESTERN RLY 16.1 Preparation and consolidation of sub Sqm 10068 218.9 2203885.2 grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating 86 with road roller including making good the undulations etc. and re- rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 16.3 Supplying and stacking at site. 16.3.1 90 mm to 45 mm size stone cum 1400 2098.4 2937760 87 aggregate 16.3.2 63 mm to 45 mm size stone cum 1400 1636.05 2290470 88 aggregate 16.3.3 53 mm to 22.4 mm size stone cum 1400 1842.3 2579220 89 aggregate 90 16.3.10 Moorum cum 1400 768.25 1075550 16.4 Laying, spreading and compacting cum 5600 1046.95 5862920 stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 91 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 16.42S CONCRETE PAVEMENTS Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling 16.43 to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.2 Cement concrete manufactured in cum 3510 11098.45 38955559.5 automatic batching plant (RMC plant) 92 including transportation to site in transit mixer 16.49S MISCELLANEOUS CAO-C-ADI-ENGINEERING/WESTERN RLY 16.75 Providing and laying C.C. pavement of cum 2000 9823.8 19647600 mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally 93 finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, 16.78 spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.78.2 With material conforming to Grade-II cum 2500 2924.85 7312125 94 (size range 53 mm to 0.075 mm ) having CBR Value-25 16.80 Construction of dry lean cement cum 1672 4148.65 6936542.8 concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum 95 moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in- charge. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, 17.1 with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern Each 3 6767.4 20302.2 96 W.C. pan of size 580x440 mm with integral type foot rests CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, 17.2 with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid Each 3 6515.55 19546.65 97 plastic seat and lid Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush 17.4 pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.2 Range of two urinal basins with 5 litre Each 6 9612.4 57674.4 98 white P.V.C. automatic flushing cistern Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of 17.7 standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4 White Vitreous China Flat back wash Each 6 1879.2 11275.2 99 basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and 17.10 stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 100 17.10.1.1 510x1040 mm bowl depth 250 mm Each 6 6945.6 41673.6 Providing and fixing P.V.C. waste pipe 17.28 for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 101 17.28.2.1 32 mm dia Each 11 119.55 1315.05 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic 17.32 moulded frame of approved make and shade with 6 mm thick hard board backing : 102 17.32.2 Rectangular shape 453x357 mm Each 11 1361.8 14979.8 Providing and fixing soil, waste and 17.35 vent pipes : 17.35.1 100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: Metre 32 1151.9 36860.8 103 1729 17.35.2 75 mm diameter : CAO-C-ADI-ENGINEERING/WESTERN RLY 17.35.2.1 Sand cast iron S&S pipe as per IS: Metre 32 1044.75 33432 104 1729 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 17.37 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 105 17.37.1 For 100 mm dia pipe Each 32 362.85 11611.2 106 17.37.2 For 75 mm dia pipe Each 32 360 11520 Providing and fixing bend of required degree with access door, insertion 17.38 rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 100 mm dia 107 17.38.1.1 Sand cast iron S&S as per IS - 1729 Each 6 598.5 3591 17.38.2 75 mm dia 108 17.38.2.1 Sand cast iron S&S as per IS - 1729 Each 6 501.45 3008.7 Providing and fixing single equal plain junction of required degree with 17.43 access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.43.1 100x100x100 mm 109 17.43.1.1 Sand cast iron S&S as per IS - 1729 Each 6 726.55 4359.3 17.43.2 75x75x75 mm 110 17.43.2.1 Sand cast iron S&S as per IS - 1729 Each 6 629.5 3777 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent 17.60 arm complete, including cost of cutting and making good the walls and floors : 17.60.1 100 mm inlet and 100 mm outlet 111 17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 26 1996.5 51909 Providing and fixing PTMT Bottle Trap 17.70 for Wash basin and sink. 17.70.1 Bottle trap 31mm single piece Each 6 367.1 2202.6 moulded with height of 270 mm, effective length of tail pipe 260 mm 112 from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold 18.6 water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. External work 113 18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4) Metre 850 265.05 225292.5 114 18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4) Metre 1350 415.1 560385 115 18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11) Metre 850 597.75 508087.5 116 18.6.7 PN - 10 Pipe, 75 mm OD (SDR-11) Metre 850 696.75 592237.5 CAO-C-ADI-ENGINEERING/WESTERN RLY 117 18.6.8 PN - 10 Pipe, 90 mm OD (SDR-11) Metre 850 975.3 829005 118 18.6.9 PN - 10 Pipe, 110 mm OD (SDR-11) Metre 500 1301.35 650675 18.7S C.P.V.C. PIPES Providing and fixing G.I. pipes complete with G.I. fittings and 18.10 clamps, including cutting and making good the walls etc. ( Internal work - Exposed on wall ) 119 18.10.1 15 mm dia nominal bore Metre 130 366.4 47632 120 18.10.2 20 mm dia nominal bore Metre 104 437.3 45479.2 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the 18.11 walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 121 18.11.1 15 mm dia nominal bore Metre 182 580.45 105641.9 122 18.11.2 20 mm dia nominal bore Metre 156 635.2 99091.2 Providing and fixing G.I. pipes complete with G.I. fittings including 18.12 trenching and refilling etc. External work 123 18.12.3 25 mm dia nominal bore Metre 2204 467.75 1030921 124 18.12.4 32 mm dia nominal bore Metre 230 540.3 124269 125 18.12.6 50 mm dia nominal bore Metre 2180 762.15 1661487 126 18.12.8 80 mm dia nominal bore Metre 2106 1041.7 2193820.2 18.15S BRASS FITTINGS Providing and fixing gun metal gate 18.17 valve with C.I. wheel of approved quality (screwed end) : 127 18.17.1 25 mm nominal bore Each 211 622.4 131326.4 128 18.17.3 40 mm nominal bore Each 75 826.1 61957.5 129 18.17.4 50 mm nominal bore Each 18 1026.65 18479.7 130 18.17.5 65 mm nominal bore Each 35 1742.15 60975.25 131 18.17.6 80 mm nominal bore Each 18 2604.55 46881.9 18.23S C.I./DUCTILE IRON PIPES & SPECIALS Providing and laying S&S centrifugally 18.27 cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 132 18.27.3 150 mm dia pipe Metre 550 2037 1120350 133 18.27.6 300 mm dia pipe Metre 600 6128.65 3677190 C.I. SLUICE VALVES/ FIRE HYDRANTS 18.31S & FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, 18.31 rubber insertions etc. (the tail pieces if required will be paid separately) : 18.31.3 150 mm diameter 134 18.31.3.1 Class I Each 60 6966.55 417993 18.31.6 300 mm diameter 135 18.31.6.1 Class I Each 1 27059.3 27059.3 18.48 Providing and placing on terrace (at Per Litre 5200 11 57200 all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 136 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and fixing C.P. brass bib 18.49 cock of approved quality conforming to IS:8931 : 137 18.49.1 15 mm nominal bore Each 32 506.8 16217.6 Providing and fixing C.P. brass long body bib cock of approved quality 18.51 conforming to IS standards and weighing not less than 690 gms. 138 18.51.1 15 mm nominal bore Each 6 798.95 4793.7 Providing and fixing C.P. brass stop cock (concealed) of standard design 18.52 and of approved make conforming to IS:8931. 139 18.52.1 15 mm nominal bore Each 39 670.45 26147.55 18.54S PTMT FITTINGS Providing and fixing PTMT pillar cock 18.56 of approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, Each 6 208.45 1250.7 140 weighing not less than 110 gms AIR VALVE & WATER METER (BULK 18.59S TYPE) Providing & fixing chrome plated brass battery based infrared sensor 18.84 operated pillar cock, having foam flow technology. 141 18.84.1 15 mm nominal bore Each 6 8803.7 52822.2 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the 19.1 proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 142 19.1.2 150 mm diameter Metre 494 695.8 343725.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm 19.2 nominal size) all-round S.W. pipes including bed concrete as per standard design : 143 19.2.2 150 mm diameter S.W. pipe Metre 494 1179.85 582845.9 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 19.4 with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.3 180x150 mm size P type 19.4.3.1 With common burnt clay F.P.S. (non Each 6 2802.15 16812.9 144 modular) bricks of class designation 7.5 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture 19.6 of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 145 19.6.1 100 mm dia. R.C.C. pipe Metre 300 507.05 152115 146 19.6.2 150 mm dia. R.C.C. pipe Metre 250 556.45 139112.5 147 19.6.3 250 mm dia. R.C.C. pipe Metre 250 899.8 224950 CAO-C-ADI-ENGINEERING/WESTERN RLY 148 19.6.4 300 mm dia. R.C.C. pipe Metre 240 994.3 238632 149 19.6.5 450 mm dia. R.C.C. pipe Metre 250 1620.95 405237.5 150 19.6.7 600 mm dia. R.C.C. pipe Metre 400 2243.4 897360 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm 19.7 nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal 19.7.1 dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non Each 6 12770.55 76623.3 151 modular) bricks of class designation 7.5 19.7.1.2 With Sewer bricks conforming to IS : Each 25 12711.8 317795 152 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal 19.7.2 diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.7.2.2 With Sewer bricks conforming to IS : Each 25 26244.7 656117.5 153 4885 19.8 Extra for depth for manholes : 19.8.1 Size 90x80 cm 19.8.1.1 With common burnt clay F.P.S. (non Metre 8 8825.4 70603.2 154 modular) bricks of class designation 7.5 19.8.1.2 With Sewer bricks conforming to IS : Metre 24.5 8654.25 212029.13 155 4885 19.8.2 Size 120x90 cm 19.8.2.2 With Sewer bricks conforming to IS : Metre 22.7 10381.45 235658.92 156 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 19.15 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 157 19.15.1 With 20x20 mm square bar Each 450 544.7 245115 Supplying and fixing C.I. cover 19.18 without frame for manholes : 19.18.1 455x610 mm rectangular C.I. cover Each 6 1358 8148 158 (light duty) the weight of the cover to be not less than 23 kg CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and laying Non Pressure NP- 4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with 19.36 stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 159 19.36.1 450 mm dia RCC pipes. Metre 1800 3053.55 5496390 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 10.4 530.9 5521.36 160 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 231.4 634.45 146811.73 161 thickness of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm Sqm 70.2 1505.25 105668.55 162 thickness (weight not less than 12.50 kg/sqm) 22.0 WATER PROOFING 22.1S General CAO-C-ADI-ENGINEERING/WESTERN RLY 22.3 Providing and laying water proofing Sqm 28.6 769.6 22010.56 treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 163 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @1.7 kg/sqm). CAO-C-ADI-ENGINEERING/WESTERN RLY Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in- charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge to required slope and treating 22.7 similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm Sqm 930.8 1684.6 1568025.68 164 and minimum thickness at khurra as 65 mm. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.1S General CAO-C-ADI-ENGINEERING/WESTERN RLY Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved 26.19 surfaces including cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealant where required etc. but excluding the cost of purlins, rafters and trusses. 26.19.1 0.71 mm thick, the profile detail width Sqm 14400 1153.95 16616880 165 1044/920 mm, cover width 1000/875 mm. 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of 26.68 C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 cum 763 7387.25 5636471.75 166 coarse sand) Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of 26.69 C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 cum 841 9844.65 8279350.65 167 coarse sand) Total 418208148.42 Schedule Schedule C-Steel Work (DSR-2023) Item- 3 Steel Work (DSR-2023) S No. Item No Description of Item Unit Qty Rate Amount 5.0 REINFORCEMENT CEMENT CONCRETE 5.22S STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, 5.22 bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of Kg 872242.4 107.85 94071342.84 1 grade Fe-500D or more. Steel reinforcement for R.C.C. work including straightening, cutting, 5.22A bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of Kg 69460 107.85 7491261 2 grade Fe-500D or more. 10.0 STEEL WORK 10.1S General 10.1 Structural steel work in single section, Kg 270000 117.35 31684500 fixed with or without connecting plate, including cutting, hoisting, 3 fixing in position and applying a priming coat of approved steel primer all complete. CAO-C-ADI-ENGINEERING/WESTERN RLY 10.2 Structural steel work riveted, bolted Kg 926367 133.7 123855267.9 or welded in built up sections, trusses and framed work, including cutting, 4 hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.19 Providing and fixing mild steel round Kg 18000 97.2 1749600 5 holding down bolts with nuts and washer plates complete. Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and 10.25 applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, Kg 18000 172.6 3106800 6 railings, brackets, gates and similar works Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, 10.26 staircase railing and similar works, including applying priming coat of approved steel primer. 7 10.26.1 M.S. tube Kg 21390 196.8 4209552 10.28 Providing and fixing stainless steel ( Kg 5300 772.4 4093720 Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & 8 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Total 270262043.74 Schedule Schedule D-NS Items Item- 4 NS Items S No. Item No Description of Item Unit Qty Rate Amount

"Pre Engineered Building (PEB) as per MT bid drawing and technical specifications and provided by specialist approved ISO 9001 certified supplier. All structural steel items in shed like main portal, frames, columns, gantry girder and rafter etc all complete (350 Mpa or grade 50). "

Erecting, welding and fixing in Running position 52 Kg rails over the steel Metre girders to facilitate the movement of gantry with clamps, fish plates, fish bolt and other relevant fittings (Only rails, fish plate with fish bolts shall be provided by Railway free of cost). CAO-C-ADI-ENGINEERING/WESTERN RLY

Providing and fixing 150 mm GI pipe Running 'B' class with GI tees 150 x 150 x40 Metre mm approximately 2-3 metre C/c & 150 x 150 x150 mm tees at required distance including placing in position and testing complete as directed by Engineerincharge.

" ""Designing, supplying, erecting and Sqm fixing inposition 3 mm thick polycarbonate sheets of approved make texture and colour for roof lighting. Sheets to be profiled to match metal sheets described in other item should include cost of laying sheet in curvature wherever required. cost to include jointing, sealing with Butyl adhesive to make it complete water tight and takes as per manufacturers specifications and cover all cost of labour,tools, plants, temporary works etc all complete. Roofs of buildings and side cladding, gable end cladding etc all complete:- """

Providing, fixing and commissioning Each of wind driven Turbo Ventilators having average capacity of 1500 to 2000 CFM having a neck dia of 600mm, overall belly dia 700 - 750mm and 42 Nos. fins. Top plate and bottom plate ring shall be made of high grade stainless steel (SS- 304)and fins to be made of high grade aluminium (H-14) of minimum thickness 0.71mm. The base and hopper shall be constructed of UV stabilised FRB of minimum thickness 3mm matching with roof sheet profile. The rate shall include fixing of FRP base along with ventilator and special leak proof tape should be used in between all four sides, making it totally water tight etc. The rate also includes all lead & lift, transportation of materials, labours, taxes etc complete. The work should be carryout as directed by Engineer in charge and as per specifications and special conditions of contract.

Fixing 52 kg / 90 R rails over a pit line Track on RCC wall/ steel columns with metre ACB/MSCB plate as directed by Engineer-in-charge to correct spacing, gauge, alignment and level of track with necessary fittings and duly providing full components of rail fittings with all lead and lifts with contractors labour, tools and plants etc. complete as per specification and as directed by the Engineer-in- charge. CAO-C-ADI-ENGINEERING/WESTERN RLY

Manufacturing and supplying MS clits Each for fixing 60Kg/52 Kg rails on RCC wall / steel columns as per approved drawing and as directed by Engineer- in charge. The MS cleats shall be supplied to SSE/C/W at work site. The rates shall inclusive of all cost of materials, lead and lift, labours, transporting by contractor's own vehicle to the site, all taxes, T&P etc. complete.

"Providing, Fabricating & laying of Sqm colour coated Galvalume (Proflex system roofing) material for self supported roofing system (Technology similar to Proflex system provided by M&B engineering Pvt.Ltd., Ahmedabad), Material shall be of following specification, BMT 1.60mm to 1.80mm, APT 0.95mm Tolerance +/- 0.02mm thick, width 605 mm or as dicided by Railway (Tolerance +/- 2mm), including supplying, loading, transporting, unlopading and staking at site, fabricating and laying with all contractors tools, plants, machineries materials and fixtures labours including all lead and lift and laps/ wastage if any etc. complete. The colour of sheet will be decided by Railway. The rate is also inclusive of designing of roofing system, proof checking and providing execution drawing. Fabrication and installation of self supported roofing technology similar to Profles System provided by M&B engineering Pvt.Ltd.,Ahmedabad or decided by engineer a) length 19 meter oir as per site requirement. b) Arch length 23 meter or as per site requirement. Note: The roofing system should be self supported roofing system (i.e. without trusses, purlings or anyancillary supports_ shall be designed by the Contractor through the consultant and got duly proof checked from VITI / Indian Insitute of Technology,Mumbai, any other Govt. agencies. Design and drawing will be approved by Railways. For design of roofing system relevant load parameters of IS code of practice to be adopted. The cost of designing and proof checking of design and drawings will not be paid separately and these charges are deemed to be included in rates of this item. The rates shall also inclusive of preparation of necessary auto cad drawing required for execution of roofing system should be 100% leak proof, resistant to corrosion and maintenance free. " CAO-C-ADI-ENGINEERING/WESTERN RLY

Providing & fixing permanently colour Sqm coated trapezoidal profiled sheet of d e p t h 2 8 - 3 5 m m d e e p a n d 200- 300mm pitch distance with precisely engineered "rib & Flute" design with 950-1050 m m effective cover width matching t o profile o f P U F panels. Profiled sheets shall be minimum 0.50 mm TCT/0.45mm B M T high tensile zinc aluminum alloy coated gallvalume/zincalume steel sheet (550 MPa yield strength) having a coating of mass of 150 GSM Zn-Al alloy coating as per IS 15961-2012 finishe d w i t h 2 0 micron approved c o l o u r c o a t i n g o f Super Durable Polyester X RW coating or equivalent paint, coat on exposed surface over a primer coat of 5 micron and back coat of 5 micron on reverse side over a 5 microns primer coat.There shall b e 2 s m a l l ribs/square flutes between p r o fi l e s f o r providing additional strength. T h e sheet t o be fixed over the purlins/girts with hexagonal need s e l f drilling suitable fasteners with EPDM washer on crests of the sheet @ 300mm c/c on all sides and end laps etc. Measurement shall b e based on per unit of finished laid surface area. S e a l a n t a n d g a s k e t s wherever necessary t o b e provided t o ensure c o n t e m p o r a r y a e s t h e t i c l o o k of international standard. Total 322563717.70 Schedule Schedule E-Steel Woek (USSOR-2021) Item- 5 Steel Work (USSOR-2021) S No. Item No Description of Item Unit Qty Rate Amount Metallizing of steel work of girders with sprayed aluminium after surface preparation by Sand/grit blasting, followed by one coat of etch primer (IS:5666) & one coat of Zinc Chrome primer (IS:104) and two coats of aluminium paint (IS:2339) with all labour, T&P and material as a complete job duly conforming to all relevant specifications and process given under Clause 39 of IRS-B1- 2001. Note: Nominal Thickness of sprayed Aluminium coating shall be 150 microns. DFT of Zinc chrome primer shall be 25-30 microns and DFT of each coat of Aluminium paint shall be 12-14 microns.

On new girder during fabrication Total 10156837.60 Schedule Schedule F-P-Way Work (USSOR-2021) Item- 6 P-Way Work (USSOR-2021) S No. Item No Description of Item Unit Qty Rate Amount CAO-C-ADI-ENGINEERING/WESTERN RLY Under Traffic Block: Dismantling of existing BG turnouts, diamond crossings and derailing switches with all types of rails and sleeper layout, removing rails, switches, crossings, sleepers & fastenings, leveling of ballast to correct profile & stacking all the released materials, sleepers, fastenings, rails, switches & crossings including segregating & stacking at specified locations in a neat and countable manner, within the lead of 250m & all lift, clear of infringements, crossing of track, if any complete, as directed. Note: 1. This item shall be operated only when existing turnout is replaced either with new turnout in case of TTR or with plain track when existing turnout is no more required at that location. 2. Rail cutting will be paid extra under relevant item. 3. Laying of new turnout or plain track on prepared ballast bed, as required, shall be paid separately under relevant item.

1 in 8½ Turnout (Under Traffic Block) Set Laying and linking all types of turnouts, diamond crossings and Derailing switches with 52Kg / 60Kg rail section on PSC sleepers on ballast b e d , prepared after dismantling & removal of existing turnout/normal line during TTR/yard remodeling under traffic block, as per standard drawing, duly leading sleepers, rails, switches, crossings, fastenings including rail cutting, drilling, fixing of all components, fittings with housing of tongue rails as per requirement of signaling, preparing ballast bed, filling and spreading of ballast as required, linking of turnout with track, attending track parameters including lifting, providing one round of packing to make track fit for 20 kmph speed including lubrication of fittings/fastening, complete as directed by Engineer in-charge. Note: Payment for dismantling & removal of existing turnout/normal line, transportation/stacking of released material and preparing of ballast bed is not included in this item and shall be paid under relevant item.

1 in 8½ Turnouts Recoupment of ballast in running line with railway's stone ballast from existing stacks available along alignment either on top of cutting or on cess or at toe of bank by head leads or by any other means and spreading to make up deficiency in the required profile with contractor's labour, tools & plants, as directed by Engineer-in-charge. Note: Payment shall be made based on ballast stack measurement.

For average lead up to 50m and lift up cum to 5m CAO-C-ADI-ENGINEERING/WESTERN RLY

Lifting and packing for regrading the TRM existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in-charge. 25mm gap Cess Welding and finishing o f weld to meet the prescribed tolerances and pass all stipulated tests with Contractor's labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including all required handling and rehandling of rails, marking of welded joint, painting weld collar with anticorrosive paint, as directed by Engineer in charge. Note: 1. Welding shall be carried out only by trained welder having valid competency certificate using RDSO approved Alumino Thermit Welding Portions, 3 piece prefabricated mould (Zircon washed) manually pressed, Single shot crucible fitted with auto tapping thimble and Compressed Air Petrol/LPG preheating technique as per RDSO Specification No IRST/19- 2020 with latest amendment. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing.

For 60 Kg/60EI - R260 grade Rail Flash Butt Welding of 90 UTS rails and finishing of weld to meet the prescribed tolerances and pass all stipulated tests, conforming to IR's Manual for Flash Butt Welding of Rails with latest amendment, using contractor's self-propelled rail cum road / Mobile FBW Plants, tools, equipments and consumables. Item also includes painting with anticorrosive paint as approved and marking of welded joints, pre- straightening & post-straightening of panels and USFD testing of finished weld as directed by Engineer in- charge.

60 Kg on Cess CAO-C-ADI-ENGINEERING/WESTERN RLY

Dismantling track of any structure, removing rails, sleepers, fish plates, cutting of rails, segregation and stacking of released Rails, Sleepers and fitting at nominated location in countable manner within a free lead of 500m, levelling of ballast to correct profile for laying new track over it, all as per direction of Engineer-in-Charge. Providing Centre Line / Rail Level, reference Pegs on formation at an interval of 30 metres on one side or at centre of proposed / existing track, as directed by engineer in-charge for linking of new track / CTR / Deep Screening / Lifting / Lowering works, duly embedding in formation including marking with contractor's paint. Note: (1) Rails/tie bar of suitable size bar shall be supplied by the Railways from nearest Stores Depot. In case of hard wood peg, the hard wood will be supplied by the c o n t r a c t o r. (2) Excavation and concrete work, if required, will be paid separately.

With contractor's hard wood pegs of Each 50 mm dia and 60 cm long

Installation of reference points for Each track centre line in main and loop lines, in straight or curve portion, SRJ for turnouts, heel of crossing (HOC), locations of derailing switches, switch expansion joints etc. away from formation on firm ground at known offset with MS Angles of 50mmx50mmx5mm thick of length 1.80 m each, founded in concrete block of size 30cm x 30cm x 45cm of nominal mix 1:3:6, including painting to reference pegs with two coats of enamel paints on exposed surface, as directed by Engineer In charge. Note: Earth work and Cement concrete will be paid under relevant items.

Spreading of ballast, from existing cum stacks available along formation on top or at cess, in required uniform thickness, compaction of ballast layer laid on new formation at all the locations with smooth wheeled power roller of 8-10 tonne capacity to sufficient number of passes to form consolidated ballast bed of approximately 250mm thickness to a width of 4m symmetrical to centre line of proposed track in correct line & level with all ascents & descents, as directed by Engineer in-charge. Note: Item is inclusive of (a) providing ramp for taking roller to formation and removing the same & making good formation after completion of work; (b) redistribution & leveling of excess ballast while rolling to obtain uniform plane cambered surface. CAO-C-ADI-ENGINEERING/WESTERN RLY Linking of BG track (except at LC, Bridges and SEJs) with any type of rail section and sleeper of specified density, on ballast bed spread and compacted with suitable roller, over prepared formation including leading free rails/welded panels available along the alignment on to formation, leading and spreading all fittings and fastenings, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and f a s t e n i n g s to correct gauge & alignment, lubrication of fittings and fastenings with contractor's grease as per IRPWM standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in Indian Railway Track Machine Manual for deployment of Tamping Machine. Note: 1.Rail cutting and Hole drilling shall be paid separately. 2.Spreading of ballast and compaction shall be paid separately under relevant item.

For sleeper density of 1660 sleepers TRM per km

Linking of track at level crossing TRM locations as per RDSO drawings with any type of rail section and sleeper on prepared formation including leading free rails/welded panels available along the alignment on to formation, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and f a s t e n i n g s to correct gauge & alignment, excavating level crossing portion as necessary, fixing check rails to running rails, providing C.C blocks, chairs, anti corrosive painting to running rails and check rails, lubrication of fittings and fastenings with contractor's grease as per IRPWM standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in Indian Railway Track Machine Manual for deployment of Tamping Machine. Note: Rail cutting and hole drilling, if required, shall be paid separately under relevant item. CAO-C-ADI-ENGINEERING/WESTERN RLY Working of the Railway Push Trolley by arranging one Head trollyman along with 3 trollymen as per Railway's rules and stipulations for conducting inspections by Railway officials and as directed by Engineer in-charge. Note: 1) Labourers supplied should be of skilled in case of head trollyman and semiskilled in case of trollymen and capable of pushing trolley in all gradients, and levels duly observing all safety precautions as per the manual. 2) The labour engaged should be physically fit for strenuous work, literate and meeting prescribed medical category.

For Half day (4 hours) Preparation of completion drawings of yard in AutoCAD, showing all the details, such as circulating area, approach road, platform shelter, platform, FOB etc., showing relevant particulars to appropriate scale as per IR's Engineering Code on approved quality, transparent media as per details supplied by Railways, including submission of check print for proof checking, duly incorporating the suggested corrections and modifications and supplying the final plot on approved quality & transparent media with six copies of ammonia prints complete and soft copy, as directed by Engineer in- charge Note: (i) Drawings shall be prepared by using latest drawing making softwares AutoCAD, Work station etc. and printing shall be done on high end latest plotters. (ii) Stage Payment - (a) For check print - 40% (b) For Paper tracing - 40% (c) For Ammonia print & soft copy - 20%.

Completion drawing of land plan

Completion station Picking up of slacks in track of all sleeper density, duly opening up ballast, gauging, alignment, correcting longitudinal & cross levels, packing, boxing of ballast and dressing the same under traffic conditions as per procedure prescribed in latest edition of IRPWM and as directed by Engineer in- charge. Note: In-charge section Engineer should identify locations requiring packing and obtain prior approval of DEN/XEN before execution of the work when there is no Zonal Track Maintenance agency deployed in the section.

For PSC Sleeper CAO-C-ADI-ENGINEERING/WESTERN RLY First or Second Through Packing of track of all sleeper density including giving a general lift, as desired to eliminate sag after Deep Screening work, lifting of track, lowering of track and major realignment of curves and formation rehabilitation as per procedure prescribed in latest edition of IRPWM. Note: General lift is normally 25 mm and isolated lift may be up to 50 mm.

For PSC Sleeper Track with Sleeper TRM Density of 1660 Third or subsequent Through Packing o f track for all sleeper density including picking of slacks, as required after second through packing, subsequent to Deep Screening work as per procedure prescribed in latest edition of IRPWM. This item can also be used after lifting/regrading/realignment works also. Note: General lift is normally 25 mm and isolated lift may be up to 50 mm.

For PSC Sleeper Track with Sleeper TRM Density of 1660 De-stressing of LWR/CWR track of any density under traffic line block with contractor's labours, tools, equipments and consumables inclusive of all lead & lift. Activities include cutting of LWR/CWR into convenient panels of specified length, removal of ERCs, liners, greasing of ERCs and liner contact area, lifting rails and keeping them on rollers provided at every 15 sleepers, working out elongation of rail ends depending on prevailing site conditions, pulling rails with the help of Hydraulic Tensor to achieve the desired elongation, cutting rails, as required, removing rollers and placing rail in position, re-fixing ERCs & liners and adjustment of gap at SEJs : Note: (1) Welding of rail joints will be paid separately. (2) Rail cutting and Hole drilling shall be paid separately. (3) Opening and closing of LC if required will be paid separately. (4) As per procedure prescribed in latest edition of IRPWM & CE's Circulars for destressing of LWR/CWR, if any.

Without Rail tensor Fixing of Wooden Distance Block of size 1.0m x 0.3m x 0.15m between track and platform wall.

With Contractor's hard wood block. Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS- 9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

For 60 Kg Rails CAO-C-ADI-ENGINEERING/WESTERN RLY

Anti-corrosive painting to weld collar Each for Thermit welded rail joints on track or on cess for new welded joints to protect against normal corrosion for any rail section with two coats of ready mixed bituminous black paint of reputed make confirming to latest IS:9862 on welded area up to 10cm on either side including on the underside of rail foot by brush including surface preparation as per Railway's AT Weld Manual including lettering / weld numbering with approved enamel paint as directed Note: Before painting, dust, loose rust and mill scale and dirt shall be removed thoroughly by wire brushing. Scrubbing welded area with water to make it free from slag and other water soluble compounds to make it dry. Painting 2 coats to Bridge Reference / Boards, Structures etc. along track with enamel paint of approved make w i t h different colours & letters, as directed by Engineer in-charge.

Miscellaneous Jurisdiction Boards, Structures etc. Carrying out USFD testing of Alumino Thermic (AT) welds on all types of rails, using 0° (2 MHz) double crystal; 70° (2 MHz) 20mm x 20mm single crystal probe for head & flange testing; 2 nos. 45° (2 MHz) single crystal with tandom rig for testing from rail top to bottom & for half moon testing and 70° (2 MHz) 20mm x 20mm side looking probe by NBC (Need Based Concept) method under traffic conditions as per provisions of IR's "Manual & Specifications for Ultrasonic Testing of Rails and Welds" & related instructions duly marking the defects, submission of daily reports and storing back-up data as specified & directed. The rates are inclusive of contractor's men, materials & machines complete unless otherwise specified and directed.

Track having up to 3 rail panels - With Each Railways' USFD machine including related T&P and probes : Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading.

Lead up to 5 Km

Lead beyond 5 Km and up to 10 km

Lead beyond 10 Km and up to 20 km

Lead beyond 20 Km and up to 30 km

Lead beyond 30 Km and up to 50 km

Lead beyond 50 Km and up to 100 Km MT CAO-C-ADI-ENGINEERING/WESTERN RLY

Lead beyond 100 Km and up to 150 MT Km

Extra for every Km per MT beyond MT-Km 150 Km over item no. 172047 Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: 1 . Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items.

Lead up to 5 Km

Lead beyond 5 Km and up to 10 km

Lead beyond 10 Km and up to 20 km

Lead beyond 20 Km and up to 30 km

Lead beyond 30 Km and up to 50 km

Lead beyond 50 Km and up to 100 Km MT

Lead beyond 100 Km and up to 150 MT Km

Extra for every Km per MT beyond MT-Km 150 Km over item no. 172057

Opening of level crossing up to Sqm required width from centre line of track for replacement of sleepers by digging of pucca road surface up to bottom of sleeper, removing of ballast, muck etc., screening of ballast & stacking the same near level crossing and disposing of all debris, replacing the required sleeper duly packing the sleeper to make fit for normal traffic and closing of LC surface with screened ballast to original level by proper ramming and consolidation to smooth motarable surface as directed by engineer in- charge.

Dismantling existing check rail of RM Level Crossing, blocks, bolts & nuts and stacking these in a countable manner near LC, free from any infringements as directed by Engineer in-charge.

Erecting detonator rail posts at Each required locations as required including cutting the rail to required length varying from 1.00M to 1.50M , leading the rail pieces from nominated station / mid section from nearest depot to site of work, erecting the rail post by making the pit size as required and filling with CC 1:3:6 mix with 40mm aggregates and painting the rail post with two coats of synthetic enamel paint of approved colour and make, marking of detonator symbol as per site requirement, with contractor's materials, labour, paint, all lead and lifts, etc., complete as per specifications and as directed by the Engineer-in-charge. Note: Excavation and concrete work for foundation will be paid under relevant item. CAO-C-ADI-ENGINEERING/WESTERN RLY

Erecting Emergency Chain Posts for Each level crossings , including cutting rail to required length varying from 1.00M to 1.50M , drilling holes, providing hooks & links / rings with necessary locking arrangements to fix emergency chain, leading the rail pieces from nominated station / mid section from nearest depot to site of work, erecting the rail post by making the pit of size as required and filling with CC 1:3:6 mix with 40mm aggregates and painting the rail post with two coats of synthetic enamel paint of approved colour and make, with contractor's materials, labour, paint, all lead and lifts, etc., complete as per specifications and as directed by the Engineer-in-charge. Note: (1) Rails & chain will be supplied by Railways. (2) Excavation and concrete work for foundation will be paid under relevant item.

Providing Rail Barricading with rails MT supplied by Railways with verticals provided at every 1.5m interval, height of barricade being up to 1.5m above ground / termination level and one or more row of horizontal rail, duly cutting rails and drilling holes as required, assembling necessary accessories to required length, including earthwork excavation for foundation, fixing posts in cement concrete 1:3:6 base of size 0.45m x 0.45m x 0.60m and one coat of red oxide painting of steel work. Note: 1. Excavation and concrete work will be paid separately. 2. Rail shall be made available within 250 metres Manufacturing, fabricating and supplying retro-reflective Level Crossing Indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro-reflective sheeting conforming to type-IV of ASTM- D4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by Engineer In- charge or as per IRPWM guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D- 4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support frame of M.S. angle iron of size 25mm x 25mm x 3mm provided all along the edges of board with theft resistant measures, back side of board shall be with non-peelable weather-proof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. Vertical post shall have black & white anti-corrosive paint or powder coating complete, as directed. CAO-C-ADI-ENGINEERING/WESTERN RLY

Manufacturing and supply of circular Each STOP Disc of 600mm dia for fixing on emergency chains at level crossings as given in IRPWM including providing Retro reflective sheet fully covered over board confirming to type-IV of ASTM-D4956 in red back ground colour and text "STOP" of white colour over back ground. The circular board shall consists of 2mm thick Aluminium sheet fixed to 1.5mm thick MS Sheet of 600mm dia with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support .Retro reflective sheet is to be pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01.A vertical holding stand of 1000 mm length x15mm thick to be jointed to back side of board along with a hook for fixing emergency chain as directed by Engineer In charge. Manufacturing, fabricating and supplying retro-reflective Engineering Indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro-reflective sheeting conforming to type-IV of ASTM-D4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by Engineer In-charge or as per IRPWM guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support frame of M.S. angle iron of size 25mm x25mm x 3mmprovided all along the edges of board with theft resistant measures back side of board shall be with non-peelable weatherproof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. Vertical post shall have black & white anti- corrosive paint or powder coating complete, as directed.

Caution Indicator Board of size Each 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long

Speed Indicator Board of equilateral Each triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long CAO-C-ADI-ENGINEERING/WESTERN RLY

Stop 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long

Termination Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long

Manufacturing, supplying and fixing Each Curve Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately) Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

JCB Backhoe Loaders 3DX Plus or Hour similar with minimum 1.10 cum bucket capacity

Hydra or similar tyre mounted Pick-n- Hour Carry crane of 12T capacity for misc. works of handling of material

Tractor transportation or other misc. works.

Manufacturing and fixing buffer stop Each with Railway supplied rails, cutting, including bending of rails as per plan ,with all contractor's labour, materials, tools, plants etc. and all lead and lift including crossing of track where necessary and as directed by Engineer in charge at site. Note: Excavation, fixing rails in cement concrete, drilling of holes will be paid separately. Total 49643328.32 Schedule Schedule G-Supply of Ballast (USSOR-2021) Item- 7 Supply of Ballast (USSOR-2021) S No. Item No Description of Item Unit Qty Rate Amount CAO-C-ADI-ENGINEERING/WESTERN RLY Manufacturing, supply and stacking of machine crushed Track Ballast conforming to RDSO Specification (IRS-GE-1) with latest correction slips at Railway depot or nominated location. Note: Distance of nearest quarry mentioned in each sub-item is only for the purpose of selecting the items for preparation of estimates/tender schedule, based on the minimum distance between nearest quarry and centre of supply points and will not affect the selection of quarry during physical supply in any way till prescribed specification is met fully.

When distance of nearest quarry is cum more than 50 km and up to 100 km

When distance of nearest quarry is cum more than 100 km and up to 150 km Total 23437800.00 Schedule Schedule H-Electrical General Supply, fabrication, installation, testing & Commissioning LT panel I/C-2x800A 4-poleACB, O/G- Item- 1 4x400 A MCCB, 4x250A MCCB, 4 x125A MCCB & 4x63 A MCCB. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1622436.00 Supply, fabrication, installation, testing & Commissioning of LT Panel I/C-2x400 4-pole MCCB, O/G- Item- 2 4x250A 4-pole MCCB, 4x125A 4-pole MCCB, 4 x63A 4-pole MCCB. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 656036.00 Supply, fabrication, installation, testing & Commissioning of LT Panel consisting- Incoming 2 x 250A Item- 3 4-pole MCCB & Out going -6x125A 4-pole MCCB & 2 x 63 A 4-pole MCCB. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1822144.00 Supply, installation, testing and commissioning of LHB type socket assembly 400 Amp. As per part Item- 4 No. SI/LHB/CSA/00/CAB housed in stainless steel housing of size 3 ft x 2 ft x 2ft with one contector AC 3 series 370 Amp 415V AC coil to on / off set fixing stand to be cement concret foundation. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1651352.00 Supply, installation, testing and commissioning of Double ended jumper plug assembly with 10 Mtr. Item- 5 Polyamid conduit and copper 120 sq mm cable for phase and 95 sq mm for neutral for LHB type coupler. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1496016.00 Supply, fabrication, installation, testing & Commissioning of Distribution board consisting- Incoming Item- 6 1 x 125 A 4-pole MCCB & Out going - 8 x 63 A , 4 pole MCB, 2x20A DP MCB . S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 249240.00 Item- 7 Supply installation, Testing & commissioning of 400A feeder pillar. CAO-C-ADI-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 68120.00 Item- 8 Supply installation, Testing & commissioning of 250 Amp feeder pillar. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 105126.00 Supply, fixing, testing & commissioning of Battery charge/discharge unit Input Voltage : 415 V AC, Item- 9 50 HZ, output Voltage : 110 V DC - 155 V DC, output current : 0-300 A as per RDSO's specifications S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 2918682.00 Item- 10 Fabrication, supply, fixing & commissioning of 110V battery charging terminals. (EFT) S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 69180.00 Item- 11 Fabrication, supply, fixing & commissioning of welding terminals. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 69180.00 Supply, installation, testing & commissioning of 3 phase, 415 V 63 A, heavy duty plug-socket socket Item- 12 complete with 63 Amp 3-pole MCCB and 20A ray roll plug and Socket with 20A DP MCB in M.S. enclosure. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 585480.00 Item- 13 Supply, installation, testing & commissioning of 20 W LED fitting with 110 V, AC operated. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 46720.00 Supply, installation, testing & commissioning of step down transformer 440/110 V AC 3 phase,5 Item- 14 KVA for LED fitting. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 7556.00 Item- 15 Digging of cable trench 450 x 1000 mm & refilling as per Specification. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 558700.00 Item- 16 Digging of cable trench 450 x 1000 mm in RCC/PCC/hard soil. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 403700.00 Transportation, Laying,Installation , terminating, testing and commissioning of LT/HT cable of sizes Item- 17 Core 1/2/3/4 x 10 sqmm to core 1/2/3/4 x 400 sqmm in existing trench, pipe or on structure. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 396200.00 Item- 18 Supply, installation, testing & Commissioning of LT/HT cable route marker. CAO-C-ADI-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 17172.00 Item- 19 Supply and laying of RCC half round pipe 100 mm ID & 1 mtr length. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 316200.00 Item- 20 Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 95200.00 Supply, installation, testing and commissioning of HDPE pipe 110 mm nominal dia 6.2 mm Item- 21 thickness as per IS 4984-1995. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 421640.00 Horizontal Direction Drilling/boaring without demage of surface raod using auger machine the bore Item- 22 shall be 150mm dia and shall be done at the depth of minimum 1.5meter or as requirement of site from the ground level this include insertation of 110mm dia 7mm thickness HDPE pipe . S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 808500.00 Supply, transportation, installation, testing & Commissioning of SDB Switch board consisting- Item- 23 Incoming 1 x 63 A 4-pole MCB & Out going -8 x 32 DP MCB , 12 x 16 A SP MCB . S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 148560.00 Supply, installation, testing & commissioning of Distribution board having incoming-32 A DP MCB Item- 24 and outgoing- 6 x16A SP MCB. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 68110.00 Supply,installation, testing & commissioning of 5mtr long hot dip galvanised octagonal poles with Item- 25 130 mm bottom & 70 mm top made up of 3mm thick steel sheet along with base plate of size 200x200x12mm with foundation. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1112790.00 Item- 26 Supply, installation, testing & commissioning of 70 system watt LED street light fitting. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 504812.00 Supply, installation, testing & commissioning of surface wiring of light, fan and call bell point with Item- 27 modular switch by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC casing caping and accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 17160.00 Supply, installation, testing & commissioning of surface wiring of plug point 6 Amps with modular Item- 28 switch on same board by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC casing caping and accessories S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1270.00 CAO-C-ADI-ENGINEERING/WESTERN RLY Supply, installation, testing & commissioning of surface wiring of modular plug point 16/6 Amps Item- 29 with modular switch on separate board by 3 nos. 4.0 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC casing caping and accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 2946.00 Supply, erection, testing & commissioning of surface wiring of sub-main from board to board and Item- 30 room to room with 3 nos. 2.5 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 8400.00 Supply, erection, testing & commissioning of surface wiring of sub-main from board to board and Item- 31 room to room with 3 nos.4.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 8000.00 Supply, erection, testing & commissioning of surface wiring of sub-main from board to board and Item- 32 room to room with 3 nos.6.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 6320.00 Supply, erection, testing & commissioning of wiring of 2 way light point with modular switch by 4 Item- 33 nos. 1.5 sq mm FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe/ casing caping. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1356.00 Item- 34 Supply and providing musical call bell. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1680.00 Supply,installation, testing and commissioning of ceiling fans including hooks, clamps, nuts & bolts Item- 35 etc. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 106950.00 Item- 36 Supply, fixing, testing & commissioning of serface type modular electronic fan regulator. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1848.00 Supply, installation, testing & commissioning of 10/20 W LED bulk head fitting with 230 Volt AC Item- 37 operated. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 31579.00 Supply, installation, testing and commissioning of Concealed wiring of light, fan and call bell point Item- 38 with Modular switch by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC conduit pipe & Conduit pipe accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 145880.00 Supply, installation, testing and commissioning of Concealed wiring of plug point 6 Amps3 pin with Item- 39 Modular switch on same board by 3 nos. 1.5 sq mm FRLS PVC insulated copper conductor multi- strand single core in PVC conduit pipe & Conduit pipe accessories . S No. Item No Description of Item Unit Qty Rate Amount CAO-C-ADI-ENGINEERING/WESTERN RLY

Erection Total 32010.00 Supply, erection, testing & commissioning of Concealed wiring of plug point 16 Amps 6 pin with Item- 40 Modular switch by 3 nos. 4.0 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC conduit pipe & Conduit pipe accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 36300.00 Supply, erection, testing & commissioning of concealed wiring with 3 nos. 2.5 sq mm sub-main Item- 41 FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 178600.00 Supply, installation, testing and commissioning of concealed wiring of sub-main with 3 nos. 4.0 sq Item- 42 mm FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 142600.00 Supply, erection, testing & commissioning of concealed wiring of sub-main from board to board and Item- 43 room to room with 3 nos.6.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC casing caping and accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 70500.00 Supply, erection, testing & commissioning of concealed wiring of sub-main from board to board and Item- 44 room to room with 5 nos.10.0 sq mm FRLS PVC copper conductor, multi-strand single core in PVC conduit pipe. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 18720.00 Item- 45 Supply, installation, testing and commissioning of concealed 100W modular fan regulator. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 26796.00 Supply, installation, testing and commissioning of exhaust fan 300 mm complete with all Item- 46 accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 27760.00 Item- 47 Supply, installation, testing & commissioning of 1x (18-20) W LED tube fittings . S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 254507.00 Supply and providing recess mounted LED Fitting- (36@45&41@ W , 2x2 sq ft with flexible, 3-core, Item- 48 multistrand copper conductor, PVC insulated & sheathed wire of required size. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 236544.00 Supply, installation, testing & commissioning of Corrosion proof LED fitting (Capsule type fitting) Item- 49 suspended, surface type-2 x (18 to 20)W LED tube fittings . S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 252360.00 CAO-C-ADI-ENGINEERING/WESTERN RLY Supply, installation, testing and commissioning of 3 nos.4.0 sq mm FRLS PVC copper conductor, Item- 50 multi-strand single core in Suface/Recessed Steel conduit (including Conduit pipe & accessories) as required for Cover shed wiring. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1353600.00 Supply, installation, testing and commissioning of 3 nos.4.0 sq mm FRLS PVC copper conductor, Item- 51 multi-strand single core in PVC casing caping/ PVC conduit and accessories for Cover shed wiring. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 72000.00 Supply, installation, testing and commissioning of 16 sqmm aluminium conductor PVC insulated and Item- 52 sheathed catenary wire. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 58500.00 Supply, installation, testing and commissioning of 600mm sweep air circulator fan including Item- 53 mounting accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 863000.00 Supply and providing switch board of suitable size having 16/6A plug socket with 16A switch and Item- 54 two Nos. 6A switch. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 59655.00 Item- 55 Supply, installation, testing & commissioning of junction box S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 97400.00 Supply, installation, testing & commissioninog of LED Light fitting 250 watt complete with Item- 56 accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 4946050.00 Supply, installation, testing & commissioninog of LED Light fitting 90 Watt complete with Item- 57 accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 124280.00 Supply, installation, testing & commissioninog of LED focus Light fitting 30 Watt complete with Item- 58 accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 129816.00 Supply, installation, testing & commissioning of Auto control of portal light light Distribution board Item- 59 having Time switch , contactor and MCB . S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 17403.00 Item- 60 Supply and providing 50mm dia UPVC Pipe. S No. Item No Description of Item Unit Qty Rate Amount

Erection CAO-C-ADI-ENGINEERING/WESTERN RLY Total 78880.00 Item- 61 Supply,installation, testing & commissioning of Pipe earthing. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 80310.00 Item- 62 Supply,installation, testing & commissioning of 8 SWG G.I. earth Wire. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 26640.00 Item- 63 Supply, fabrication, installation, testing & Commissioning of MS cable tray. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 943200.00 Supply, Erection, Testing & Commissioning of sub-mersible non clog pump set complete with all accessories, motor starter, and base plate of cap.36 LPS Discharge on 10 mtrs. Head (approx. 10 Item- 64 HP/7.5 KW) complete with automation control panel, Flate cable ( cooper) , suction & delivery pipes, clamps etc S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 299744.00 Item- 65 Providing FL Mast 20 mtrs S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 450500.00 Item- 66 Foundation for FL mast. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 101054.00 Supply, installation, testing & commissioninog of LED Light Flood light fitting 250 W on high mast Item- 67 and other location, complete with all accessories. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 382920.00 Supply,installation, testing & commissioning of 5 star invertor split type Air conditioning unit of 1.5 Item- 68 ton capacity complete with all accessories for mounting of AC unit. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 394840.00 "Supply, erection, testing & commissioning of :- Concealed wiring of plug point 20 Amps with Item- 69 Modular switch by 3 nos.4.0 sq mm FRLS PVC insulated copper conductor multi-strand single core in PVC conduit pipe & Conduit pipe accessories for AC & Geyser " S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 8056.00 Item- 70 Dismantling & stacking of Rail /Tubular pole with removal of O/H lines S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 6060.00 Item- 71 Excevation of all kind of soil (except Rock) and filling back the excavated earth as per Specification. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 5206.00 Item- 72 Excevation of Hard soil (Stone/Rock/RCC) and filling back the excavated earth as per Specification. CAO-C-ADI-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 24920.00 Item- 73 Supply, installation, testing & commissioning of Straight through Jointing Kit of size 4x70-95 Sq mm S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 19260.00 Supply, installation, testing & commissioning of Straight through Jointing Kit of size 4x120-150 Sq Item- 74 mm S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 21008.00 Item- 75 Supply, testing and demonstration of maintenance staff tool boxes complete S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 16102.00 Supply , erection, fixing, testing & commissioning of stainless steel body water cooler 150 liters Item- 76 capacity. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 131316.00 Item- 77 Supply of clip on meter S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 8623.00 Item- 78 Supply of earth tester S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 5931.00 Item- 79 Supply of insulation tester S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 2502.00 Item- 80 Supply of 8 feet ladder S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 4596.00 Item- 81 Supply and providing 11 KV , ISI mark rubber matting of size; 1Mtr width & 2.5 mm thick. S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 29436.00 Item- 82 Supply of Self supporting Aluminium ladder -15 feet. S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 9144.00 Item- 83 Supply, testing and commissioning of RMPU maintenance ladder. S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 46697.00 Design, Engineering, Supply, installation, testing and commissioning of solar light pipes of 750mm Item- 84 Dia with all accerssories for lighting as per tender specification. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 5784800.00 CAO-C-ADI-ENGINEERING/WESTERN RLY Design, Supply, erection, testing and commissioning of wall/hanging/ floor mounted type LED Item- 85 signage/ direction board in half elleptical/ Parabolic/Triangular shape. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 398200.00 PIT LIGHTING: Design, fabrication, supply, erection, testing and commissioning of LED based luminary having input voltage 40V -72V AC, frequency 50/60 Hz, input power - 16W with IP67 enclosure and impact protection IK 10 with high brightness, high intensity with an efficiency of 80 luimens/Watt and with proper ON/OFF and locking arrangements. The luminaries shall be designed Item- 86 in such a way to luminate the underframe of the coach and path lighting of pit line. The cubical shall be fabricated with MS sheet/polycarbonate body with high built of epoxy coating, heat resestive upto 70 degree centigrade complete with weather proof and rust proof. Fixture shall be IR-GOLD-CI of M/s GOLDWIN Limited or equivalent. Make shall be as per T.S. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1479150.00 CAT WALK LIGHTs: Design, fabrication, supply, erection, testing and commissioning of LED based cat walk luminaries complete, with input wattage of 21W sutaible to work on 40V -72V AC supply with all connected accessories and proper ON/OFF and locking arrangements. The luminaries Item- 87 should be ingress protection IP 67 and impact protection IK 10. The cubical shall be fabricated with MS sheet/polycarbonate body with high built of epoxy coating, heat resestive upto 70 degree centigrade complete with weather proof and rust proof. Fixture shall be IR-GOLD-CI of M/s GOLDWIN Limited or equivalent. Make shall be as per T.S. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 3276000.00 Supply, erection, installation, testing and commissioning of 5KVA, 220V/48V, Three Phase, natural Item- 88 air cooled, coper wound Auto Transformer as per IS in a Weather proof enclosure (with support structure) with input and Output MCB protection, input and output terminal block and indicator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 652096.00 Supply, erection, installation, testing and commissioning of maintainance free earthing arrangement (Chemical Earthing with low impedance corrosion resistant and long life)Earth Item- 89 electrod is made up of high tensile low corbon steel cercular rods bonded with copper on outer serface and interconnection of earth electrod with suitable size copper strip.the earth electrod shall be of minimum 17.0 mm diameter & 3.66 mtr legth as per details given TS S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 274368.00 Schedule Schedule I-Electrical TRD 1(a)-Preparation of designs and drawings for overhead equipment and verification of purchaser's Item- 1 pegging plan, SED,CSD. S No. Item No Description of Item Unit Qty Rate Amount

Per Track Erection KM Total 164934.00 Item- 2 8(a)(xii)-Marking/Painting of temperature & 'Y'-Measurement of OHE mast at BWA locations S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 2340.00 8(b)(i) Supply without insulator and erection of material for termination of Single conductor of Over Item- 3 Head Equipment or terminating wire S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 40074.00 9(dz) Supply without insulator and erection of anti-creep with Cadmium copper catenary wire in Item- 4 polluted area S No. Item No Description of Item Unit Qty Rate Amount

supply CAO-C-ADI-ENGINEERING/WESTERN RLY

Erection Total 130548.00 Item- 5 11(a)(i) Supply without Insulator and erection of cut-in (9 Tonne) Insulator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 47592.00 Item- 6 11(a)(ii) Supply without Insulator and erection of a suspension (9 Tonne) Insulator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 39492.00 Item- 7 11(b) Supply without Insulator and erection of 25 kV Post Insulator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 29880.00 Item- 8 27(a) Supply, Erection, oil-filtration, testing and commissioning of L.T. supply transformers (10 kVA) S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 187286.00 Item- 9 31(a) Transfer of equipment from one mast or support to another S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 158904.00 Item- 10 31(d) Dismantling of Over Head Equipment S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 40404.00 Item- 11 31(gz) Dismantling of a Section Insulator Assembly S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 12376.00 Item- 12 31(i) Dismantling of an Isolator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 4786.00 Item- 13 31(j)Dismantling of a Post / Pedestal Insulator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 9132.00 Item- 14 37(a)Unloading of all types of Copper & Aluminium conductors S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 2148.00 Item- 15 37(b) Loading of all types of Copper & Aluminium conductors S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 2148.00 Item- 16 32 -Erection under Power Block S No. Item No Description of Item Unit Qty Rate Amount

Erection CAO-C-ADI-ENGINEERING/WESTERN RLY Total 828231.00 Item- 17 2(b) Concrete for foundation and plinth In other than hard soil and rock S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 5266800.00 3(b)(i) Supply & erection of fabricated and galvanised structures (O, N & R type portals) with all Item- 18 necessary components other than masts S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1408296.00 3(b)(ii) Supply and erection of structure steel (traction masts) fabricated and galvanised of all type: Item- 19 B-Series Mast S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 6051660.00 3(b)(iii) Supply and erection of special fabricated and galvanised steel structures other than portals Item- 20 & traction masts not covered under items 3(b)(i) & 3(b)(ii) S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 920400.00 Item- 21 3(e)(i) Supply and erection of a Guy Rod Assembly S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 245472.00 Item- 22 3(i) Supply and erection of 25kV Caution Board / Number Plate S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 76950.00 Item- 23 4(a)(i) Supply without insulator and erection of Single bracket assembly S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1625712.00 Item- 24 4(a)(ii) Extra on 4(a)(i) for supporting two OHEs S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 75460.00 Item- 25 4(b)(i) Supply without insulator and erection of a pull off arrangement for one OHE S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 11954.00 8(a)(v) Supply and erection of Regulating Equipment (3-Pulley type) with counter weight assembly Item- 26 for conventional/composite OHE S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1167480.00 Item- 27 8(b)(ii) Supply without Insulator and erection of materials for termination of Double conductor CAO-C-ADI-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 281220.00 Item- 28 16(a)(i) Supply and erection of a structure bond S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 163152.00 Item- 29 16(b) Supply and erection of a longitudinal bond S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 51540.00 Item- 30 16(c) Supply & erection of a transverse and special bond S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 89760.00 Item- 31 17(a) Supply & erection of a single earth electrode S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 25392.00 Item- 32 17(E) Supply and erection of 8 SWG G.I. wire for earthing S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 3216.00 Item- 33 30(b)(iv) Supply and erection of anti-monkey menace. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 563112.00 Item- 34 6(az) Supply and erection of Over Head Equipment only S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 1320830.00 10(az)Extra on item 6(a) for supply and erection of additional fittings at a turn-out, diamond Item- 35 crossing or overlap S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 135000.00 Item- 36 12(az) Supply without Insulator & erection of a Section Insulator Assembly S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 503271.00 13(a) Supply without Insulator and erection of a 25 kV single pole isolator without earth contact Item- 37 assembly S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 442152.00 CAO-C-ADI-ENGINEERING/WESTERN RLY Item- 38 13(d) Extra for supply & erection of an earth contact assembly in an isolator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 46272.00 15(e) Supply of materials and erection of large copper jumper 160 Sq. mm between cross feeder Item- 39 and OHE S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 267282.00 Item- 40 17(d) Supply and erection of copper strips for equipment earthing. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 12648.00 Item- 41 26(a)(ii) Supply & erection of Solid copper bus-bars 18mm. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 199095.00 Item- 42 26(c) (i) Supply & erection of solid copper bus-bar connectors: Bus terminal (RI-6310) S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 37944.00 Item- 43 26(c) (ii) Supply & erection of solid copper bus-bar connectors: Bus splice (RI-6320) S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 82764.00 Preparation, design, supply and installation of OHE Sectioning Diagram Board of Approximate size Item- 56 900 mm X 1500 mm S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 87762.00 Item- 57 Supply of Antibird disc on insulator end fitting S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 181104.00 Supply of Nylon/plastic Net- High density polyethelene (HDPE) monofilament netting type-III, UV Item- 58 stabilized s per IS 16008(Part-2)-2016/PVC Virgin HDPE Net Preferably in black colour. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 13100.00 Item- 59 Supply of 10 KVA Change over panel as per RDSO spec. suitable for 10 KVA AT supply S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 73160.00 Item- 60 Tree Trimming / cutting S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 10000.00 CAO-C-ADI-ENGINEERING/WESTERN RLY Making of Horizontal boring to track formation below 2 metres from formation label suitable for Item- 61 inserting of 200 mm dia HDPE / DWC pipe. S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 153210.00 Erection of Additional contact wire piece across RRA clamp with supply & erection of 02 nos. of PG Item- 62 Clamps on either side (contact wire piece shall be supplied by Railway). S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 81000.00 Transportation of Railway supply materials/Released material from Railway depots/work site to Item- 63 Work site/Scrap depot S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 53190.00 Item- 64 Dismantling & removal of existing Auxiliary transformer with DO fuse S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 9022.00 Item- 65 Dismantling & removal of Regulating Equipment Complete set S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 15696.00 Item- 66 Dismantling & removal of Cantilever Assembly along with insulator S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 14820.00 Item- 67 Dismantling & removal of Mast, portal, TTC & other small part steel S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 73510.00 Item- 68 Breaking of concrete foundation of Masts, portals & TTC S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 85064.00 Item- 69 Dismantling & removal of Guy rod assembly S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 7140.00 Supply of SPS for joint of Double Stay Insulator Assembly 35 mm Dia ( Material SGCI Grade 400/15 Item- 70 Galvanized ) S No. Item No Description of Item Unit Qty Rate Amount

sUPPLY Total 10738.00 "Supply of 9 ton & BT insulator joint assembly (length 170 mm Dia 80 mm slotted holes. Material Item- 71 SGCI Grade 400/15 Galvanized.)" S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 27612.00 Supply of Large Parallel clamp for 160SQ MM (jumper)/107SQ MM contact wire OR catenary 65 SQ Item- 72 MM S No. Item No Description of Item Unit Qty Rate Amount

Supply Total 72480.00 Item- 73 Digging of trench in normal soil S No. Item No Description of Item Unit Qty Rate Amount

Erection CAO-C-ADI-ENGINEERING/WESTERN RLY Total 41440.00 Item- 74 Digging of trench in hard soil S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 51940.00 Item- 75 Cable laying S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 37800.00 Item- 76 Cable rout marker S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 2212.00 Item- 77 Half round RCC Pipe 100 mm S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 36400.00 Item- 78 Supply & Erection of HDPE pipe 110 mm S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 15690.00 Item- 79 LT junction box for AT supply S No. Item No Description of Item Unit Qty Rate Amount

Erection Total 8364.00 Schedule Schedule J-Telecom Item- 1 Supply of Telecom material S No. Item No Description of Item Unit Qty Rate Amount

Supply of Pre-lubricated HDPE duct, Kilometre 40 mm OD, 33 ID as per RDSO specification No. RDSO/SPN/TC/45/2013 Rev. 2.0 or latest. The item also includes supply of all the accessories of HDPE duct like end caps, collars, bends, couplers etc.

Supply of 24 fibre OFC Splice Numbers enclosure FIBRE OPTIC FIBRE SPLICE STRAIGHT JOINT ENCLOSURE ( SJC ) complete with all accessories as per RDSO/SPN/ TC/ 68/2014, rev. 3 or specs for 24 fiber ofc cable with later amendment.

Supply of Thermo shrink Universal Numbers Jointing kit for Quad Cable (Straight/Derivation) as per RDSO IRS/TC-77/2012 revision 3 With latest Amd .

"Supply of Medium class GI pipes 100 Metre mm dia (4.5 mm thickness) as per IS 1239 ( Part 1 ) : 2004 with coupling on culverts bridges or at any other locations as decided by Site Engineer. It includes supply of all material required for fixing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends."

Supply of PVC rigid pipe 25mm dia Metre with ISI mark & reputed make. CAO-C-ADI-ENGINEERING/WESTERN RLY

Supply of Wall Mount 6 core OFC Numbers Termination Box complete with base housing, base mounting with fixing arrangement.

Supply of 6 Core single mode Metre armoured optical fiber cable with required termination and accessories for connecting field.

Supply of Cat-6 cable of reputed Metre make such as Finolex/D Link /Molex or similar.

Supply of Manageable layer-2 switch Numbers (POE) 24 ports with 4 Transceiver Module with up linking facility as per RDSO/ SPN /TC /83/2014, Rev.2.0 or latest. Note:- Switches shall be TTP approved.

Supply and installation of 8 port Numbers manageable switch with 2 SFP's as per RDSO specification. Note:- Switches shall be TTP approved.

Supply of single line hands-free push Numbers button telephone with caller ID facility, tone pulse dialling, flash, automatic gain control, loud ringing repeated model make Beetel, Panasonic, Orpat.

Supply of IP phone connect-IP6 LP Numbers with Gigabit connectivity HD voice & 4-bit gray level, support 3-way conference support PoE up to 6 SIP accounts.

Supply of Maintenance Free Earth Set Electrode of length 3m, including supply of 3 bags of Earth enhancement material for earthling (20KGs /bag) for each electrode & other accessories as per Drg. No. SDO/RDSO /E&B /001 and RDSO Spec No. RDSO/SPN/197/2008 or latest.

Supply, Installation, Testing, and Numbers commissioning of Two zone Power Amplifier set of 240 Watt, 230V AC /24V DC confirming to RDSO/SPN /TC /63/2006 Rev 0.0 or latest amd. Ahuja or similar make complete with one set of Microphone, Cord, and Stand.

Supply of microphone with minimum Numbers specification as frequency response 100-10000Hz sensititvity-2.5 mV/Pa, impednace-600 Ohm along with 4.5 mtr shield cable , 3-pin XLR connector and quick detachable holder.

Supply of IP67 PA Horn speaker 30 Numbers watt as per clause No 4.5 of RDSO Specification No. RDSO / SPN /TC/63/2006 Rev 0.0 or latest. Make - LBD 8347,8308 of Philips , UHC30XT of Ahuja or superior.

"Supply of 15 Watts Column speaker Numbers with 100V Line Matching transformer as per clause No 4.6 of RDSO specification No. RDSO/SPN/TC/ 63/2006 Rev 0.0 or latest. Make- Bosch , Philips,Ahuja or superior." CAO-C-ADI-ENGINEERING/WESTERN RLY

Supply of Twin Core shielded cable of Metre size 24/36 SWG with standard colour (Red and Black) having screening coverage of 95 % area of the sheath of the cable using braided copper conductor. Make- Polycab, Finolex, Delton, or superior

Supply of Full HD Resolution Fixed Numbers bullet type IP Colour Camera with varifocal lenses along with housing and mount with all accessories as per RDSO Specification No RDSO/SPN/TC /65/2021 Version 6.0 or latest with latest amendment. Note:- Camers shall be STQC approved.

Supply of Full HD Resolution Fixed Numbers dome type IP Colour Camera with varifocal lenses along with housing and mount with all accessories as per RDSO Specification No RDSO/SPN/TC /65/ 2021 Version 6.0 or latest with latest amendment. Note:- Camers shall be STQC approved.

Supply and installation of 16 CH NVR Numbers 8 SATA CPUNR-16Up to 16 channel IP camera input, Total Throughput 640 Mbps, H.265/H.264 /MJPEG/ MPEG4 codec decoding, Up to12Mp resolution preview and playback,8 SATA IIIPorts, up to 8TB capacity for each HDD, 2 HDMI /VGA simultaneous videooutput, Support Multibrandnetwork cameras, ONVIF Version 2.4 conformance,Mobile Software: iCMOB,gCMOB CMS Software:KVMS, KVMS Pro or similar

Supply of Surveillance HDD (8 TB Numbers surveillance Hard Disk Make : Toshiba Seagate or similar.

supply of 55" LED smart TV suitable Numbers for 24x7 working and 3years. Total 2131292.00 Item- 2 Excution of Telecom Work S No. Item No Description of Item Unit Qty Rate Amount

Supply & installation of 24 port Rack Numbers mounted LIU along with all accessories.

Laying of HDPE pipe duct in Kilometre trenches/GI Pipe/RCC pipe/on wall/on PF, including jointing and levelling using couplers and sealing the section etc as per site requirement.

Blowing and drawing of OFC through Kilometre laid HDPE duct as per approved route plan , taking due care while transporting and sealing both ends as per specification. CAO-C-ADI-ENGINEERING/WESTERN RLY

Excavation of Trench 1.2 meter deep cum & 0.3 to 0.6 meter wide (Depth & width of cable trench as per site condition) at thebottom along main line in all types of soil/Strata including clearing of bushes, trees, temporary construction, bailing out water from the trench etc and refilling of the trench by excavated soil and ramming after laying of the required quantity of cable as per instruction of engineer at site. If it is not possible to reach the required depth at any location than proportionate payment will be made to the contractor.

Splicing of laid under above items Numbers OFC cable and making the splice joint in dust free environment with contractor's own equipments and labour. Straight joint enclosure (SJC) is covered under schedule 'A' remaining all required materials, tools , plants shall be arranged by the contractor. splicing shall be started from one end and each splicing shall be monitored after splicing and after closing the enclosure for all the fibers from one central location by contractor's engineer with his own OTDR and optic Talk set with railway engineer , trace for the fibers shall be taken and signed jointly, if any fibred splice shows high loss/lossy event, the same shall be redone before completion of splicing work. The splice loss shall be as per the policy/technical circulars issued by the railways from time to time.

Supply & Installation of Plastocrate Numbers pre-fabricated (RCC) OFC jointing pits size 1000 mm x 1000 mm x 800 mm (depth) . The material shall be supplied as per engineer in charge instructions.

Transportation and laying of 6 Kilometre Quad/PIJF cables in Trenches/ GI pipe /RCC pipe/DWC pipe, Trunking etc as per approved cable route Plan and instruction of Site Engineer. Empty cable drums to be retained by the contractor the cable drums with unused cable at site to be returned by the contractor from site to Stores of SSE/T/C/SBI.

End to end testing of all fiber of the Numbers optical fibre cable laid under above items between Station/Cable Huts/OC & other locations.All required equipments, tools and plants shall be arranged by the contractor. Five number of printout of traces in folders of OFC parameters/ results, The per kilometer link loss shall be as per the policy/technical circulars issued by the railways from time to time. CAO-C-ADI-ENGINEERING/WESTERN RLY

Fixing of Medium class GI pipes 100 Metre mm dia(4.5 mm thickness) as per IS 1239 ( Part 1 ) : 2004 with coupling on culverts bridges or at any other locations as decided by Site Engineer. It includes installation of all material required for fixing arrangement. Contractor will install flexible/corrugated HDPE pipe at the end of GI pipe along with any masonry work(if required) to protect the cables from sharp edges and sudden bends

Laying of 6 core OFC through PVC Metre Pipe/ Casing capping and termination of LIUs & FDMS.

Execution of Straight/Derivation/EC Numbers Joint on Quad/PIJF Cables as per instruction by site engineer.

Supply, Transportation & Installation Numbers of RCC cable route marker engraved and painted on both sides along the route every 50 mt. & route diversions as per site incharge instruction.

Installation of Maintenance free Earth Numbers Electrode as per RDSO/SPN/ 197/2008 or Latest.

Supply & installation of 1 KVA Online Numbers UPS with Lithium ion battery having atleast 03 (three) hour backup on full load with 5 years warranty.

"Horizontal direction drilling/boring Metre without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level.The ground level shall be considered ignoring the bank height of the bank of the road The length of the bore shall be minimum 4 Mtrs long, this include insertion of different dia DWC pipe/ GI pipes with coupling etc."

Cement miscellaneous items in th ratio 1:3:6. Item includes excavation, ramming, curing and plastering with cement & sand mixtures (aggregate not exceeding 3.8 cm). (Aggregate cement & sand to be supplied by the contractor.

Supply and Installation of 802.11ax Numbers wave 2 dual radio ceiling mount poe access point with 4x4 mimo embedded antenna, 866 mbps wireless speed on 5 ghz frequency band and cloud management facility. make : zyxel / netgear / cisco or similar.

Supply of 8 Port FXS Gateway Numbers including mounting kit and all the accessories & its standard installation CAO-C-ADI-ENGINEERING/WESTERN RLY

Cutting of the platform surface Metre (Tile/Slab) for a depth of 25cm and a width of 10cms and refilling /Reconditioning/ Concerting /Repairing the platform after laying HDPE pipe and cable. Cutting should be done with marble cutting machine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not disturbed,

Supply, installation of 19" 15U Rack Numbers Wall/Pole Mount, with front Door Glass Door Type, all Doors should be Removable Type with all accessories Like Electrical fitting, Fan Tray, Cable Manager, Spike Buster/ PDU, Supporting angle etc.

Laying & fixing PVC conduit pipe Metre (conduit pipe must be fixed with clamp at interval of 300mm) all the material for laying and fixing of pipe will be supplied by contractor as per the instruction of railway site incharge.

Installation of wireless access point Numbers dual band indoor managed/ standalone access, built in antenna, two ports(1GE + 1FE), POE support. This includes all accessories make DIGISOL model DG-WM5307IAC or superior.

Supply & Installation of Professional Numbers 19" Equipment Racks 4U for housing of network equipments with supporting angle and all necessary accessories.

Installation, Testing & Commissioning Numbers of Full HD Bullet/ Doom IP Colour camera along with the mount. All the accessories and fixing materials including mount required for this installation are to be supplied by contractor within the same cost.

"Supply and Installation of 19"" 9U Numbers Rack Wall/Pole Mount, with front Door Glass Door Type, all Doors should be Removable Type with all accessories Like Electrical fitting, Fan Tray, Patch Panel, Cable Manager, Spike Buster/PDU, supporting angle etc."

Installation commissioning of different type of speakers with hanging arrangements and clamps on cover shed/poles as per directions of Field Engineer. Total 2654271.00