CONSTRUCTION OF SWIMMING POOL AT M.P.S.C., RAIPUR, DEHRADUN

Amount

DSR Item- 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. :All kinds of soil.

DSR Item- 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil

DSR Item- 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

NSI Item- Disposal of Excavated earth/rock unserviceable, upto dumping zone near national highway distance upto 10 km from site.

DSR Item- 2.27 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

DSR Item- 16.3.2 Supplying and filling RBM under floor including ramming and dressing complete. 63mm to 45 mm nominal size.

DSR Item- 2.35.3.1 Diluting and injecting chemical emulsion (Chlorpyriphos/Lindane E.C. 20% with 1% concentration), at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surfaces of the excavations made for the foundation of the building, soil under floors, apron, back fill material and along all the faces of the walls for PRE-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II. (Plinth area of Building shall be measured for Payment)

DSR Item- 4.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

DSR Item- 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

DSR Item- 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level

DSR Item- 5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto floor V level

DSR Item- 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein.

DSR Item- 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

DSR Item- 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

DSR Item- 5.9.2 Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc.

DSR Item- 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

DSR Item- 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.

DSR Item- 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

DSR Item- 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR Item- 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

DSR Item- 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

DSR Item- 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as pecified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

DSR Item- 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

DSR Item- 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

DSR Item- 11.53 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

DSR Item- 11.48.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

DSR Item- 12.1.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²

DSR Item- 12.4.2 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

DSR Item- 12.7.2 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

DSR Item- 22.1.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. Using rough kota stone.

DSR Item- 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

DSR Item- 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

DSR Item- 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

DSR Item- 5.1.2 P/L reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

DSR Item- 16.70.1 G.I. chain link fabric fencing with G.I. wire of dia 4 mm

DSR Item- 13.50.3 Applying priming coat on steel work.

DSR Item- 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

DSR Item- 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade.

DSR Item- 2.1 Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

DSR Item- 2.2 Supplying and stacking of good earth at site i/c royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

DSR Item- 2.3 Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment)

DSR Item- 2.4.1 Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm

DSR Item- 2.5 Rough dressing the trenched ground including breaking clods

DSR Item- 2.6 uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation

DSR Item- 2.7 Fine dressing the ground

DSR Item- 2.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately)

DSR Item- 2.9 Mixing earth and sludge or manure in proportion specified or directed by the officer-in-charge

DSR Item- 2.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts

DSR Item- 2.13 Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm refilling the excvated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of rearth after redution by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling and directed, within a lead of 50m. lift upto 1.5m complete (cost of sludge, manure or extra earth to be paid for seperately)

DSR Item- 2.14.4 Digging holes in ordinary soil and refilling the same with the exavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reductin by 8%9 flooding with water, dressing including remocal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for seperately) Holes 45cm dia and 45cm deep

DSR Item- 2.16 Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.

DSR Item- 2.19.1 Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S. (non modular) bricks of class designation 7.5

DSR Item- 2.28 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge

DSR Item- 2.54 Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge

DSR Item- 2.57 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water)

DSR Item- 2.57.1 Trees Plant

DSR Item- 2.57.2 Shrubs Plant

DSR Item- 5.13 Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.

DSR Item- 8.1 Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.

DSR Item- 5.9.20 Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12 mm thick

DSR Item- 13.7.2 12mm C.P. finished with a floating coat of neat cement in cement mortar 1:4( 1 cement : 4 fine sand)

DSR Item- 19.19.1.1 P/F in position pre cast RCC manhole cover and frame of required shape and of approved quality. Rectangular shape 600x450mm internal dimensions

DSR Item- 19.15.1 Providing MS foot rest including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 as per standard design. (i) with 20x20mm square bar

DSR Item- 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

DSR Item- 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

DSR Item- 22.2.1 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough kota stone.

DSR Item- 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR Item- 9.21.1 P/F ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. A) 35 mm thick including ISI marked Stainless Steel butt hinges

DSR Item- 10.14.2.1 P/F Pressed steel door frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, Profile C

DSR Item- 10.11.1 Providing and fixing MS standard rolled steel glazed windows of required sizes side hung, top hung or fixed in position with CC block of size 15x10x10cm with all fittings.

DSR Item- 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

DSR Item- 9.51.2 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading

DSR Item- 10.30.2 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes

DSR Item- 23.2.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia

DSR Item- 23.8 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.

DSR Item- 23.10.2 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia having minimum wall thickness 5.00 mm

DSR Item- 23.11.2 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia

DSR Item- 23.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

DSR Item- 23.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia.

DSR Item- 23.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts f required size complete. 150 mm clamp

DSR Item- 23.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia.

NSI Item- Filter made of fibre Glass and reinforced with Polyster yarn fitted with collector arms and diffusers made from unplasticised PVC and PP.Filter (NL2000) Diameter 2000 mm working pressure 2.5 Bar Test Pressure 3.75 Bar. Flow rate of 125 Cu.m /hr at a specific velocity of 40 Cu.m/hr/Sq.m. supplied with Air Purge 20mm,Commercial Air/Water Blower for backwash,adequate quantity of Glass Filtration Media Granulometery 0.4-0.8mm and 1-2mm, along with 5 way butterfly 3 inch dia valve battery with lateral in 10 bar PVC pipe, frontal piping and valve and connections in 10 bar UPVC pipe compatible with NL2000 Filter system Emaux or Eqvilent.

NSI Item- Filter feed pump with preflter: 8 Nos (7W+ 1S)Filter Feed Pump flow rate 125 m3/hr at 12 mtr head with PreFilter, 12.5 hp pump max. horizontal centrifugal pumps along with motor.( EmauxES1250B with 110mm connection or Eqvilent.

NSI Item- Chlorine Dosing Pump with bottle, Dosing pump CTRL4-ORP Emaux withORP probe,Buffer Solution dosing pipe with fixed accessories-

NSI Item- ph Dosing PumpCTRL-20-ph with ph probe,,ph buffer Solution with bottle dosing pipe with accessories.

NSI Item- Pool drains (drain out sump) - 500 MM X 500 MM EM 2813 Emaux.( 10 Nos.)

NSI Item- Pool- 1 set of 150 gms/hr with SS 316 Venturi, booster pump , ozontor panel.

NSI Item- Pool under water E lumen LED light 35 W design with LED lights voltage 12 Volts Emaux EL-NP300P -441 with junction box and 1 meter hoseand adopter including water proof multi strand copper conductor cable of 2,5 sqmm 2 core flexible cable

NSI Item- Driver Panel for 40 lights with 3 nos 2x300W/240V Light Control box,and 10 nos of Transforme3rs TRA150VA,12V 300W.

NSI Item- Pool floor inlets nozzel : 110/ 63 mm dia id UPVC pipe with reducer T 110 to 63mm including tail piece of 63 mm dia 20 cm long with pool floor inlet Emaux EM-2862 Top of floor inlets to be in level of floor tiles provided in swimming pool as per instruction of manufacturer. Pool floor inlet to be provide of following manufacturer.

NSI Item- Ultravoilent System Medium Pressure Emaux ModelCF 300 with 3 nos 3 KW UV lamps.

NSI Item- Stainless steel ladders shall be provided with Nos of treads three, four or five as shown in drawings of Swimming pool made out of model stainless steel AlSI-304 of width 500 mm with handrails and shall be 38 mm dia of stainless steel with non-slip 4 steps

NSI Item- Over flow grating channel 300 mm x 300 mm wide - shall be provided as shown in drawing with slope 1:300, towards balancing tank including Gratings made in white UV stabilized PPl of size wide

NSI Item- Supply of Electrical accessories- Cabling for filter feed pump Cabling for under water lights Cabling for ozonator booster pump & ozonator unit Cabling for dosing pumps

NSI Item- Supplying PVC pipes & plumbing acc. 1) PVC- Pipe 150 mm dia from main pool drain to balancing tank-operated through spindle valve .x 2nos 2) PVC- Pipe 250 mm dia from balancing tank to strainer to 3) PVC- Pipe 315 mm dia from strainer to suction header line to pump suction. 4) PVC-Pipe 200 mm dia from pump delivery to header line 5) 10 kg/cm2 PVC Pipe 200 mm dia from pump header line to filter-inlet /out let/ drain 6) 10 kg/cm2 PVC Pipe 100 mm dia from filter -inlet to pool 7) 10 kg/cm2 PVC Pipe 63 mm dia from pool header line to floor inlet 8) 6.0 kg/cm2 PVC Pipe 250 mm dia from overflow channel to balancing tank.-4 lines

NSI Item- Pool under water light 12 W LED niche type made of SS material SIze -125 MM Plate with 88 mm dia and 80 depth design with LED lights voltage 12 Volts with driver water seal gasket complete in al respect including water proof multi strand copper conductor cable of 2,5 sq mm 2 core with flexible conduit complete

NSI Item- Junction size 100 mm x 100 mm square type with water proof covering made of ABS plastic material & Flexible conduit

NSI Item- Stainless steel ladders shall be provided with Nos of treads three, four or five as shown in drawings of Swimming pool made out of model stainless steel AISI-304 of width 500 mm with handrails and shall be 38 mm dia of stainless steel with non-slip4 steps

NSI Item- Pool ladder 5 Step, dia 38 mm, SS 304 MOC, Anti slippery treads Make

NSI Item- Pool ladder 2 Step, dia 38 mm, SS 304 MOC, Anti slippery treads Make

NSI Item- Over flow grating channel 300 mm x 300 mm wide - shall be provided as shown in drawing with slope 1:300, towards balancing tank including Gratings made in white UV stabilized PP of size wide.

NSI Item- Trolley mount suction sweeper with pump () Trolley mounted suction pump capacity 1.5 HP self priming pump including rope & starter complete (i) Pool cleaner semi type with trolley, 6 Nos of float complete and including PP Rope pump with trolley starter, cable etc complete.

NSI Item- 900 mm SS vacuum Head Make:

NSI Item- Vacuum Hose -100 FT, Vacuum hose with cuffs & sun light resistance complete

NSI Item- Algae brush 18 inch long with SS bristle

NSI Item- Curved brush18 inch long with Nylon brush

NSI Item- Telescopic pole 4.8 Mtr long with extendible up 9 Mtr made of aluminum tubing complete Make: lon Exchange India Ltd

NSI Item- Leaf Rack made of aluminum MOC complete

NSI Item- Leaf skimmer made of aluminum MOC complete

NSI Item- Test Kit for PH & Residual chlorine

NSI Item- TCCA 90- 100 kgs or Hypo liquid for commissioning

NSI Item- Stainless steel. handrail shall be of grade AlS-304. Handrail shall be of dia 32mm and shall be provided as shown on drawing including brackets, fixtures and fiting complete.(length-2.5 each piece)

NSI Item- Shepherd Hook with 16ft Pole

NSI Item- Life Buoy.

NSI Item- Hair & lint catcher - size 500 mm x 750 mm x 40 mm .SS Frame with mesh

NSI Item- Starting platform/starting blocks adjustable platform in polyester and fiberglass with non-slip finish of size 500 mm x 500 mm x 700 mm ht with polished finish including necessary fixing anchoring fixtures as per manufacturer instructions,

NSI Item- Anchor Fastener, Anchor Bracket SS 304

NSI Item- Suspended lane divider float lines. Float lines supplied with floats and stainless steel 6mm cable and hook including float line anchors made in SS 315, loat line flange anchoring socket made in SS 316 and float line pensioner to be provided. Float lane- Antiwave Lane 25mtr. (100mm dia) with wire with SS Hook. Make: Ion exchange

NSI Item- Flase start Indicator SS 304

NSI Item- Back Strike Indicator SS 304

SOR Item -3-3 Excavation in Soil with Dozer with lead upto 100 metres (Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)(70 % Total Excavation)

SOR Item -3-4 Excavation in Ordinary Rock with Dozer with lead upto 100 metres (Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.) Ordinary rock (20 % Total Excavation)

SOR Item -3-8-A Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal within all lifts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. Mechanised. Hard rock (10 % Total Excavation)

SOR Item -11-2-2 Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 Earth filling

SOR Item -2-2 Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203

SOR Item -11-6-3-2 Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203, Random rubble masonry In cement mortar (1:4)

SOR Item -12-9 Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

SOR Item -1-5 Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)

DSR Item- 1.10.2 Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

DSR Item- 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed mediumclass PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

DSR Item- 1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

DSR Item- 1.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

DSR Item- 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

DSR Item- 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

DSR Item- 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

DSR Item- 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

DSR Item- 1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

DSR Item- 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

DSR Item- 2.4.2 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6way 4+18 Double Door

DSR Item- 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

DSR Item- 2.10.1 Single pole

DSR Item- 2.10.2 Single pole and neutral

DSR Item- 2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

DSR Item- 2.13.1 40A

DSR Item- 2.13.2 63A

DSR Item- 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

DSR Item- 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

DSR Item- 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

DSR Item- 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

DSR Item- 1.24.1 5/6 A switch

DSR Item- 1.24.4 3 pin 5/6 A socket outlet

NSI Item- Heigh Bay LED Light 200 W Ceiling mounting type Bajaj BGHBM NXT B234 L

NSI Item- 36/40 W LED Batten tube Surya 40W6500K LED

NSI Item- 300mm Bajaj propeller type ventlating fan with bird screen Freshee 300mm

NSI Item- LED 12 W Recess mounting Down Lighter Phillips DN296B

NSI Item- 36W 2x2 LED panel Crompton CGCEL Panel luminary

DSR Item- 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

DSR Item- 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

DSR Item- Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Distribution Bus Box fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, FRLSee standing floor /wall mounted, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. bus box shall be suitable for accomodating 8 nos Energy Meters as per UPCL Norms with a loose wire box and sealable bus bar Chamber. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated with CTs PTs , MF Meters , Handles and 800 amps TPN Bus Bars etc. 630 amps 50 KA FPMCCB 1no., 250 amps 50 KA FPMCCB 1 nos,200 amps 36 KA FPMCCB1nos, 100 amps 16 KA TPMCCB 6nos.

NSI Item- Providing Gyser (water Heater) 15 Liter Capacity. 5 Star Candes

DSR Item- 2.11 S/F single pole blanking plate in the existing MCB DB complete etc. as required. (4 no. /MCBDB)

DSR Item- 2.15 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

DSR Item- 2.15.2 40 A

DSR Item- 2.15.3 63 A

DSR Item- 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. For AC

DSR Item- 2.3.2 Supplying and fixing 8 way, Double Door single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

NSI Item- Supply of 18W Inverter LED pr batten with backup 8 hrs

DSR Item- 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

DSR Item- 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

DSR Item- 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run

DSR Item- 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I.bolts, nuts, chuck nuts and spring washers etc. complete as required.

DSR Item- 6.14 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

VKJ Projects Pvt. Ltd.