PROV OF FLAG POST PATH HARD STANDING INTERLOCKING TILE GEYSERS VENTILATION FANS AND FOCUS LIGHTS AT ZONE B AHMEDABAD

Amount

Surface excavation n.exc 30cm deep & averaging 15cm deep & getting out in soft loose soil complete.

Excavation in trenches n.exc 1.5 mtr wide and not exc 1.5m depth for foundation etc and getting out in soft/loose soil complete.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete.

Removing excavated material exc 250m but n. exc. 500m and depositing where directed at a level n exc 1.5m above the starting point complete.

M&L for hard core of gauge n.exc 63mm deposited spread & levelled in layers n.exc 15cm thick watered and rammed to true surface with broken stones or boulders complete.

M&L for cement concrete 1:4:8 type C2 using 40 mm graded agg as in foundation complete.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.

M&L for 20mm thick granite (any type) work (table rubbed and polished) slab for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw as complete.

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step over and including screed bed 20 mm thick in CM (1:3), laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing, half round moulding and polishing complete .

M&L for providing PCC 1:4:8 type D-2 (40mm graded agg) 75 mm thick ,as in sub base to floors complete.

M&L for providing cement concrete 100 mm thick type B1 1:2:4 (20mm graded aggregate) as in floor finished even & smooth without using extra cement complete.

M&L for Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete.

M&L for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick with grey cement and pigment and set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 complete .

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete;

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even & smooth w/o using extra cement complete.

M&L two coat of synthetic enamel paint n exc10cm width or girth on steel /concrete surfaces including preparation of new surfaces over one coat of suitable primer complete.

M&L for forming contraction (Dummy) joints 65mm deep X 10mm wide, filled with garde A sealing compound complete .

S&F LED Flood Light 20 Watt Aluminium housing IP 65, Toughened glass, 6500K, 1000 lm & similar to `CENTURA PLUS' of Havells make type complete.

S&F PVC insulated & sheathed, multistranded copper conductor industrial cable 1.5 sqmm three core 1100 volt grade connection from Junction box to street light fitting & similar to code 17103 of Finolex make type complete.

S&F Exhaust fan AC Single phase 230/240Volts of Size 300 mm sweep Metal boby with louvre including connecting to ceiling rose complete.

S&F Ventilation fan AC Single phase 230 Volts of Size 250 mm intoilet in rectangular in shape, PVC body, white colour sweep plastic boby with louvers shutter complete.

S&F Water heater storage type, electric, capacity 25 litres BEE 5 star rated suitable for 8 bar pressure with nano polymer coated tank, incoloy heating element, rust proof ABS body etc & similar to code GHWAMFSWH025 (Monza EC) of Havells make type complete.

S&F LED 40 watt post top lantern energy saving with symmetrical light distribution, spun aluminium canopy with clear acrylic diffuser, high power and fixing & similar to cat LPTO 40 CDL (MAPLE series) of crompton make type complete.

S&F LED wall washer aluminium soft rounded corners in rectangle shape and white colour of light in both the up and down directions IP 44 ratings for uses in interiors as well as exteriors with 7 Watt LED luminaries & connecting & similar to code 34153 of philips make type complete.

S&F Flood light fittings with integral LED flood light 50 W with driver inside a PDC housing highly efficient & similar to code LHEECNP7PB6JO50 of Havells make type complete.

SNEH TRADERS

TECH SERVE SOLUTIONS