PROVN OF SHO AT AF STATION BHOWALI

Amount

SCH 'A' PART-I (BUILDING WORK INCLUDING INTERNAL WATER SUPPLY)

Excavation over area n.exc 1.50m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over area exc 1.50 mtr deep but n.exc 3.00 mtr deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (40mm graded stone aggregrade) in foundations, filling and mass concrete complete all as specified and directed.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Rough finished flat complete all as specified and directed.

Use & waste formwork to rough finished square, rectangular surfaces of concrete sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use & waste formwork to soffits of suspended slabs such as landings and similar work; not exceeding 200mm thick rough finished surface of flat concrete (Horizontal or sloping) complete all as specified and directed.

Use & waste formwork to sides and soffits of floor or roof beams, Landing beams etc. rough finished flat concrete surfaces complete all as specified and directed.

Use & waste formwork to edges of concrete flats, treads, breaks in floors and roofs n exc 20cm wide and similar work etc complete all as specified and directed.

Use & waste formwork to chullah hoods, chajjas, troughs and similar items incl edges complete all as specified rough finished flat surfaces of complete all as specified and directed.

Use & waste formwork to rough finished flat concrete staircases with sloping or stepped soffits including risers and stringers all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F for TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L RCC M-25 (Design Mix) in foundations, filling and mass concrete , Plinth beam and finished surface concrete flat complete all as specified and directed.

M&L RCC M-25 (Design Mix) in Columns, pillars, piers, posts and struts and finished conctrete surface flat complete all as specified and directed.

M&L for RCC M-25 (Design Mix) as in slab supported on walls, beams and column in floors, roofs, landings, balconies shelves etc and finished conctrete surface flat complete all as specified and directed.

M&L for cement concrete M-25 (Design Mix) in roof beams ,floor beam etc and finished conctrete surface flat complete all as specified and directed.

M&L for RCC M-25 (Design Mix) in Chajjas and finished conctrete surface flat complete all as specified and directed.

M&L for RCC M-25 design mix as in chullah hoods, stairways including steps etc all as specified and directed.

M&L for earth filling under floors including watering and well ramming in layers n.exc 25 cm thick all as specified and directed.

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as specified and as directed.

M&L brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for 40mm thick PCC cement concrete ,1 :2:4 with 12.5mm graded aggregate mixed with WPC as per manufacturers instruction as in DPC work complete all as specified and directed.

M&L for one coat of blown bituminous of grade 85/25 @ 1.50kg/Sqm over DPC all as specified and directed.

M&L for polythene film,50 micron laid on PCC surface in DPC all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick/concretes fair surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on external sufaces on other than fair faces of brick work or concrete surfaces mixed with @2% WPC by weight of cement. and finished the surface even and fair complete all as specified and directed. (Note- WPC will be measured & paid seperately)

M&L for rendering 5mm thick in CM 1:3 as in ceilings and finished the surface even and smooth without using extra cement complete all as specified

Supply only intergal water proofing compound, complete all as specified.

M&L for preparation of new wall plaster surfaces and applying two coats of distemper with oil emulsion white or tinted over 2 to 3mm thick wall care putty on wall complete all as specified.

M&L for preparation of new wall plaster surfaces and applying three coats of white wash complete all as specified.

M&L preparation of newly plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation on newly plaster surface of ceilling and applying Three coats of white wash complete all as specified and directed.

M&L for 15mm thick cement plaster 1:3 with using WPC as in screed bed of roof slab, complete all as specified & directed. (Note-WPC shall be measured & paid seperately)

M&L for applying one coat of hot blown bituminous primer @0.40 kg per sqm on plastered surfaces complete as directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified.

M&L for APP based polymeric membrane, 3mm thick (min), weighing 3.5 kg/sqm reinforced with polyster non wooven fabric matt weighing not less than 160 gms/sqm) laid on primed surface complete all as specified & directed.

M&L for 40mm thick brick tiles bedded over 15mm thick in cement mortar 1:6 and jointed, grouted flush in cement mortar 1:3 mixed with 5% of cruide oil by weight of cement, complete all as specified & directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base and finished rough and fair complete all as specified.

M&L for 25mm thick Cement concrete type B0, 1:2:4 (Using 12.5mm graded aggregate) as in floor to received tiles all as specified and directed.

M&L for granite (of any type) tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick cement screed bed in CM 1:6 all as specified and directed.

M&L for 16 to 18mm thick granite (of any type) tiles machine cut, in skirting/dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as specified and directed.

M&L for coloured vetrified ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.

All as per item No.51 here in before but as in skirting/dado including 10mm thick backing screed in cement mortar 1:4, complete all as specified & directed.

M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.

S&F for glazed ceramic tiles coloured in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n exc 63mm , deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified.

M&L for forming construction (Dummy) joint 65mm deep x 10mm wide, and filled with sealing compound grade 'A' complete all as specified.

S&F pressed steel frames double rebate of size 125x60mm, thickness 1.6 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified.

S&F steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified.

M&L for 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing of solid PVC door frame of size 50 mm x 47 mm made ouit of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheets strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site complete all as specified.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tube, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required ) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & styainless steel dash fasterners, stainless steel bolts etc, of required size on the top of floor or the side of waist slab with suitable arrangement, all as specified and directed.

M&L for cement concrete type B1 1:2:4 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, fixing of holdfast, plinth courses , string courses, lacing courses parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, filling inside the frame, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as spectified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised of size 100 mm all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 200 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing etc and making good, cuting n exc 10cm girth in brick walls complete all as specified.

Supply and fixing 15mm bore dia Galvanised steel tubes medium grade with all necessary fittings fixed complete to walls, ceilings or laid in floors etc. complete all as specified and directed.

Supply and fixing 20mm bore dia Galvanised steel tubes medium grade with all necessary fittings fixed complete to walls, ceilings or laid in floors etc. complete all as specified and directed.

M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia complete all as specified and directed.

Supply and fixing 20mm dia Stop valve cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed Complete all as specified.

Supply and fixing 15mm dia Bib tap cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed Complete all as specified (Weight not less than 400gm). all as specified and directed.

Supply and fixing 15mm dia Stop/Angle cock cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified

Supply and fixing vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with 'P' or 'S' trap, and integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime/ cement concrete bedding complete all as specified and directed.

S&F Vitreos China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing vitreous china wash hand basin,white,flat back of size 550X400 mm excluding taps, waste chain and plug porcelain stoppers but incl brackets,cutting for and pinning in ends of bracets or erecting stand complete all as specified and directed.

S&F stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, washers and waste pipe, washers, including cantilever cast iron brackets, connecting union etc overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including bedding in cement mortar on to dwarf walls all as specified and directed.

Supply and fixing PVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old high level cistern comp all as specified.

Supply and fixing PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified and directed.

Supply and fixing helth faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making commections and fixed in position completed all as specified and directed.

Supply and fixing 15 mm bore dia pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed sown hign pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed (Weight not less than 400gm) all as specified and directed.

M&L for 32mm dia waste fittings, brass, chromium plated for glaxed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing grating round 140mm size of PTMT (minimum weight 50 gms) complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified & directed.

S&F low density polyethylene pipes (LDPE) of pressure rating 6 kg/sqm cm laid in trenches of 32 mm dia complete all as specified and directed.

S&F Aluminium anodised tubular towel rail, 20mm dia,D type, 60cm long between flanges complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engr-in-Charge

S&F soap dish any type fixed to plugs/wall with chromium plated brass screws all as specified and directed.

Supply and fixing of 75 mm CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls all as specified and directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls all as specified and directed.

S&F 100 mm bore cast iron bends (any radius) all as specified and directed.

S&F 75 mm bore cast iron bends (any size) all as specified and directed.

S&F 100 mm dia cast iron cowls, complete all as specified and directed.

Returning, filling in, levelling watering and well ramming in layers not exc 25 cm depth in any type of soil complete all as specified and directed.

Removing excavated materials (soft and disintegrated rock) exc 250m but n.exc 500 m and depositing where directed complete all as specified and directed.

SCH 'A' PART-II {ROAD AND PATH)

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/disintegrated rock, complete all as specified and directed.

Removing excavated materials(Rock) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L 100mm thick hard core of broken stone of gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface etc complete all as directed.

M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed as required etc complete all as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base finished to receive floor treatment etc. complete all as specified & directed.

M&L for sand filling under floors or in foundations including watering and consolidation 50 mm thick all as specified and directed.

M&L 60mm thickness M-35 Grade precast concrete interlocking paver block and pointed with grey cement and pigment and of approved size and shape and confirming to IS 15658-2006, complete all as directed.

SCH 'A' PART-III (SEWAGE DISPOSAL)

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/dis-integrated rock, complete all as specified and as directed.

All as per item No 116 above but for additional 1.50 m beyond 1.5 m and upto 3.0 m depth all as specified and directed.

Returning filling in, including levelling, watering and well ramming in layers not exc. 25 cm in soft/dis-integrated complete all as specified and as directed.

Removing excavated material (soil) to a distance not exc. 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M&L for fly ash bricks, old size straight or curved on plan exc 6m mean radius built in cement mortar 1:4. complete all as specified & as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4 mixing WPC as per manufacturer's instruction, finished surface even & smooth with using extra cement, complete all as specified & as directed. (Note-WPC will be measured & paid seperately)

M&L for rendering 15mm thick in cement plaster 1:6 on other than fair faces of brickwork or concrete surfaces, complete all as specified & as directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone agggregate) as in coping, benching of manholes, blocks for fixing of rungs and similar works including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.all as specified and as directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto all as specified and as directed.

M&L for precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in manhole cover including necessary form work, set in cement mortar 1:4 complete all as specified and as directed.

S&F TMT bars 8 mm dia , cut to length, bent to shape required, including crancking, bending spirally for hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.

M&L 150mm dia Reinforced concrete pipes, Class NP-2 laid in trenches and jointed with collars complete all as specified & as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified & as directed.

Construction of Septic tank 10 users with brick masonry wall PCC in foundation floor, cover slab including sludge chamber, CI vent pipe ,CI cowl,inlet and outlet pipe ,RCC baffle and all necessary earth work complete all as specified and shown in drgs. (Refer Drg No. TD-217, Sheet 1/2 & 2/2)

Construction of Soakage well exc in ordinary soil foundation in PCC 1:3:6 wells of honey combed and solid in M 25 concrete including intercepting chamber screen chamber brick work in CM RCC cover slab in M 25 filling with brick bats of size 1.8 m dia x 3.00m deep.complete all as shown in drawings, specified & directed. (Refer Drg No. TD-576, Sheet 1/2 & 2/2)

SCH 'A' PART-IV (INTERNAL ELECTRIFICATION)

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No. and drawn through in and including heavy duty PVC rigid conduit with all accessories complete (concealed in wall/roof/floor etc including cutting chases and making good the disturbed surface in cement mortar and finish with existing colour), ISI marked with,including steel box of required module for fixing of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note:- Modular switch / socket etc shall be measured & paid separately).

All as per description under serial No. 135 above but for one light point/fan point controlled by two switch, two way switch complete all as specified and as directed.

All as per description under serial No.135 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per description under serial No. 135 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

M&L for point wiring using for Socket outlet 2 in 1, 5/15 Amps on independent board, approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 4 sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No.and drawn through in and including heavy duty PVC rigid conduit with all accessories complete (concealed in wall/roof/floor etc including cutting chases and making good the disturbed surface in cement mortar and finish with existing colour), ISI marked with,including steel box of required module for fixing of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 4 sqmm nominal cross sectional area single core FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note:- Modular switch / sockets etc shall be measured & paid separately).

Supply and fixing Modular Switch one way 6 Amps 1 module, 240 volts AC flush type, single pole, ISI marked conforming to IS-3854, complete all as specified & directed.

Supply and fixing Modular Switch one way 16/20 Amps 1 module, 240 volts AC flush type, single pole, ISI marked conforming to IS-3854, complete all as specified & directed.

Supply and fixing Modular Switch two way 6 Amps 1 module, 240 volts AC flush type, single pole, ISI marked conforming to IS-3854, complete all as specified & directed.

Supply and fixing Modular Socket multi-purpose, 6A - 2/3 pin combined with shutter, 2 module 240 volts AC flush type, complete all as specified & directed.

Supply and fixing Modular Socket multi-purpose, 6 pin, 6/15 Amps combined with shutter, 2 module 240 volts AC flush type, complete all as specified & directed.

Supply and fixing Modular white cover plate with frame 4 module, complete all as specified & directed.

Supply and fixing Modular white cover plate with frame 6 module, complete all as specified & directed.

M&L sub main wiring alongwith earthwire for two single core 6 sqmm size sub main wiring with one single core 6 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS-H in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 6 sqmm copper cable and one run of conduit shall be measured as one unit.

Supply and fixing LED light fitting mirror type with high output diffuser with LED 1x10 wall (2 feet long) decorative type with driver holder, accessories internally prewired, connected with ceiling rose with three core twisted flexible copper wire of suitable size, complete all as specified and directed.

Supply and fixing wall / surface mounted type LED light fitting batten type complete with LED 1x20 wall (4 feet long) extruded corbonate body with heat sink provided for efficeint heat dissipation and integral electronic driver complete with all accessories internally prewired, connected with ceiling rose with three core twisted flexible copper wire of suitable size, complete all as specified and directed.

Supply and fixing LED street light fitting 35 watt 6500K, 220 volts AC, outdoor type powder coated PPC aluminium LED light fitting having Ingress protection class IP-65/66, with high power LED complete with 32 mm bore GI pipe light grade bracket 1.5 mtr long bent to shape including 02 nos mild steel flat iron 40x5mm clamp with nut, bolts & washers etc. including conection with three core copper conductor cable of suitable size, complete all as specified and directed.

S&F LED bulb 10 watt with 6500 K colour temp in fitting, complete all as specified and directed.

Supply & fixing ceiling rose, three terminal, PVC/Polycarbonate isolated body complete all as specified & directed.

S&F factory made DB sheet metal enclosure double door 8 way, single pole and neutral, 240/415 volts, AC 50 Hz supply, with 200 Amps rated copper bus bar and IP-43 & IK-09 protection with the in built bus bar link, and flush to wall including cutting on wall and making good, complete all as specified and directed.

S&F factory made DB sheet metal enclosure double door, triple pole and neutral (TP&N ), AC 415 volts, 4 way, with 200 Amps rated copper bus bar and IP-54 & IK 09 protection with the inbuilt with metal door and flush to wall including cutting on wall and making good, complete all as specified and directed.

S&F MCB Single pole neutral 32 Amps ‘C’ Curve, 10KA, 240 volts,complete all as specified and directed .

S&F MCB single pole 6 to 32 Amps, 'C' curve 240 volts, complete all as specified and directed .

S&F MCB triple pole neutral 63 Amps ‘C’ Curve, 10KA, 415 volts,complete all as specified and directed .

S&F Blanking plate for filling gap of MCB complete all as specified and directed .

S&F modular type blanking plate for filling gap of switch/socket, complete all as specified and directed .

S&F lamp holder insulated body with back plate for batten fittings, 230 volts, complete all as specified and directed .

Cutting into wall and making hole of suitable size for fixing exhaust fan and making good damaged portion with plaster in CM 1:4 including existing finish/colour, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 4.00 BEE Five star rated with brushless direct current motor ( BLDC) complete all as specified and directed.

Supply and fixing exhaust fan made of sturdy engineering plastic complete with louvers shutter, 300 mm sweep, 1200 RPM, 230 V, 50 Hz AC,copper winding and connection with & including copper wire cable of suitable size, complete all as specified and directed.

Material and labour for earthing with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type C-1, pre cast RCC 1:2:4 type B-1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 nos, lifting handle made of 12mm dia TMT bar and set in cement mortor 1:4, funnel wire nesh, charcoal or coke and salt in alternate layer, testing etc complete all as shown in electrical plate No. 3 of SSR Part-I, all as specified and directed. Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item.

SCH 'A' PART-IV (EXTERNAL ELECTRIFICATION)

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including spreading. Levelling, watering and well ramming in layers not exc. 25 cm in soft/dis-integrated complete all as specified and as directed.

Removing excavated material (soil) to a distance not exc. 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed. (Note:- Punned thickness 23 cm of sand shall be measured & paid.)

Supply & laying bricks sub class 'B' common burnt brick designation 75, laid dry flat in trenches with width of the bricks laid to the axis of cable for protection of cable, complete all as specified and directed.

M&L GI tubing 80 mm bore light grade with all fittings laid along electric pole/road crossing etc. for cable protection complete all as specified and directed.

Supply, laying and testing LT cable 1100 volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 50 sqmm, 3.5 core, complete all as specified & directed.

Supply, laying and testing LT cable 1100 volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 95 sqmm, 3.5 core, complete all as specified & directed.

Material and labour for earthing with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead strip 32x6 mm by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type C-1, pre cast RCC 1:2:4 type B-1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 nos, lifting handle made of 12mm dia TMT bar and set in cement mortor 1:4, funnel wire nesh, charcoal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Part-I all as specified and directed. Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI strip and 15mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item.

Supply, install, commissioning and testing and cubical type LT panel board outdoor, manufactured by a CPRI approved factory, floor mounted, factory fabricated with 3.15mm thick CRCA Sheet and MS angle section 50x50x6mm frame, powder coated paint of approved shade after seven tank treatment both side (internally & externally) , provided with suitable gasket to make it dust /vermin proof with front openable double door system lockable / openable by keys from both side having chromium plated 19 mm dia fancy lock, panel suitable for 415 volts, 50 Hz, 3 phase, 4 wire system complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with suitable size PVC insulated copper conductor cable, thibles glands complete all as specified and directed. including provision following accessories and PCC foundation as per manufaturer's instructions:-

INCOMING: MCCB 3 pole, 415 volts, 100 Amps, 25 KA - 01 nos

OUTGOING: (i) MCCB 4 pole, 415 volts, 63 Amps, 25 KA - 01 nos

(ii) MCCB 4 pole, 415 volts, 63 Amps, 16 KA - 01 nos (Spare)

(iii) MCB, SPN, 220 volts, 20 Amps, 10 KA - 02 nos

Digital multifunctional meter (Ammeter, Voltmeter, PF and Frequency) - 01 nos

Indicator lamp (RYB) set of three - 01 Set

SCH 'A' PART-V (EXTERNAL WATER SUPPLY)

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including leveling, watering and well ramming in layers not exc. 25 cm in hard dense soil, complete all as specified and as directed.

Removing excavated material (soil) to a distance not exc. 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and laying GI tubing 25 mm bore, medium grade with all fittings laid in trenches/under floor etc. complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (each cut measured) 40/50 mm bore, complete all as specified and directed.

Supply and fixing brass Gate/GM globe valve 25 mm bore with iron wheel head, including insertion of union ISI marked etc. complete all as specified and directed.

Ramsons (BID ID -3126707)

M/s M Aali construction co (BID ID -3135194)