Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.5 LAccepted-AOC QURESHI BUILDING BUDSHAH CHOWK SRINAGAR 190001 KASHMIR J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹21.8 L+₹2.1 L (10.6%)Rejected-AOC | L-2 | Rejected-AOC Other than Lowest | |
| 3 | L-3₹23.3 L+₹3.6 L (18.3%)Rejected-AOC | L-3 | Rejected-AOC Other than Lowest | |
| 4 | L-4₹25.2 L+₹5.6 L (28.2%)Rejected-AOC | L-4 | Rejected-AOC Other than Lowest | |
| 5 | L-5₹25.6 L+₹5.9 L (29.8%)Rejected-AOC | L-5 | Rejected-AOC Other than Lowest |
Tender Value
₹23.2 L
EMD Value
₹46,400
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF OR SHELTER AT KHARPURA,PROVN OF 3 PH PRODIGY METER AT NFS NODE AND SPL REPAIR TO BLDG NO T-90 OF JCOs LIVING ACCN OF 19 DOU AT PATTAN UNDER GE 969 EWS
2022_MES_561508_2
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
Pattan
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹46,400
Yes
6 Apr 2023
2 Feb 2023
27 Feb 2023
2 Feb 2023
25 Feb 2023
20 Feb 2023
Amount
Taking down carefully copper/aluminum point wiring (light, Fan, Socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good distributed surface of walls, floors etc.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqmm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor complete all as specified and as directed.
(a)One light point/fan point controlled by one 5 Amps switch one way
(b)One 3 pin 5 Amp switch socket outlet on independent board.
(c)One 3 pin 5 Amp switch socket outlet on same board with accessories.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and as directed.
S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.
S&F switch piano Flush type, single pole16 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type, complete all as specified and as directed.
S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.
Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.
S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
M&L for sheet metal enclosure for DBs when MCB to be used single phase 240 volts,double door 8 way SPN with 200 Amps rated bus bar complete all as specified and as directed.
S & F MCB SP 6 to 32 Amps, 240 Volts, B Curve complete all as specified and directed.
S & F MCB, DP 40 Amps 240 Volts B curve, complete all as specified and as directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep. BEE 5 Star rated with brushless direct current motor.
S&F LED Lamp 15 W complete all as specified and as directed.
S&F LED light fitting 1x9W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper wire of suitable size , complete all as specified and as directed.
S&F LED light fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling, complete all as specified and as directed.
M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1, 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 15 mm dia light grade for protection of earth wire 20 mm dia GI pipe medium grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc
Supply and laying XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 2 Core laid in trenches or passing through pipe including connecting with suitable lugs,glands,nuts and bolts and testing complete all as specified and as directed.
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp brackets with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc
Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable of size 6 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, FRLS earth wire, fixed on wall/ceiling complete. Note : 2 Runs of main cable and one run earth wire with capping & cassing will be measured as one RM for payment.
Supply and fix exhaust fan made of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper widing of sweep/brisk air fan of size 300 mm sweep, non matallic complete all as specified and as directed.
S&F LED Mirror light "Eco Smart Linea" 18 Watts made of extruded engineering plastics suitable for surface mounting on a ceiling or wall complete all as specified and as directed.
Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, split pins, screws, nuts and spring washers complete including flexible chord of 24 / 0.20mm with necessary connector (for blade/body) as required after rewinding complete all as specified and as directed. Note : Spares used and rewinding shall be measured and paid separately under relevant item.
M&L for rewinding the Ceiling fan of any sweep using super enamelled copper conductor cable of suitable gauge including insulation, varnishing, packing, Changing of fan bearings & Painting for fan and fan blades etc complete all as specified and as directed.
S&F 3 Phase Prodigy (SECURE) Distribution Transformer Meter with built-in-current transformers, energy audit and system analysis, direct connected 3 Ph 4 Wire 415V with current range 40-200A, accuracy class 1.0, frequency 50 Hz, Insulation Class-Protection Class II, Impulse withstand 10KV, IS-13779, Dimensions (W x H x D) 365 x 283 x 221mm (with extended terminal cover) complete all as specified and as directed.
M&L for cubical panel (dimension of meter to be fixed in Panel is 365x283x221mm) for 3 Ph Prodigy (Secure) Meter along with connected items like nuts & bolts, screws, binding wire, hold fast for fixing in wall/grouting incl XLPE UG Cable 95 Sqmm 3.5 Core from Transformer to Meter and panel complete all as specified and as directed. Note : The rate deemed to be included for connection of LT UG Cable from Transformer to Panel and meter
Returning,filling in,including spreading, levelling, watering and well ramming in layers not exc. 25 Cm in any type of Soil.Complete all as specified and as directed.
Removing excavated material (soil) n. exc 50m and depositing where directed at a level n. exc 1.5m.Complete all as specified and as directed.
Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as specified and as directed.(Note:- The punned down thickness shall only be measured).
Supply and laying sub class 'B' bricks laid across the cable for cable protection complete all as specified and as directed.
Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
M&L Plain Cement concrete 1:4:8 type D-2 (40mm graded aggregate) as in foundation,filling and mass concrete complete all as specified and as directed.
Formwork to sides of pillars, posts, struts, piers, plinth beam columns and stanchions in rough finished surface of concrete at Square.Complete all as specified and as directed.
M&L for RCC (Nominal mix) 1:2:4 using (20mm graded agg) for foundation,including rafts, footings ,foundation beams, plinth beams, bases for columns ect,basement slabs under reamed piles and mass concrete.
M&L for Factory solid Pre-cast cement concrete 1:3:6 type C1 (using 20mm graded aggregate) (vibrator mode) mechnically pressed block masonry exc.m 10cm in width and setting in cement mortar 1:6,Complete all as specified and as directed.
M&L Rendering 15mm thick in cement and sand mortar 1:4 on other than fair faces of brick work or cement concrete surface including finishing the surface even and smooth using extra cement complete all as specified and as directed.
M&L for hardcore of gauge not exceeding 63mm deposited spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.
M&L Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) finished the surface even and fair without using extra cement.Complete all as specified and as directed.
M&L Virified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match,incl screed bed 15 mm thick in CM (1:4) complete all as specified and as directed.
S&F for 50mm thick wall panel made of 0.5mm thick not dipped galvanized steel sheet on both side with 50mm thick,layer of rigid etc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base channel 30x36x1.25 mm thick density of form shall be 40 kg/cum (+-kg/cum) the panel shall be precoated as approved by GE complete all as specified and as directed.
S&F for 40mm thick puff insulated panel made of 0.5 mm thick on both side with 40 mm thick rigid polyurethane with tongue and groove joint interlocking for ceiling to be fixed with and both including inverted CRCA Tee section 50x50x5mm thick and L section of 50x50x5mm thick to roof trusses including handling arrangements complete all as specified and as directed.
S&F for sliding type three track aluminium window provided with top and side member 92x317x1.5mm thick (1.06kg/Rm minimum weight) bottom three track rail shall be 90x31.75x1.5m (1.248kg/RM) shutter shall of 40x31.75x1.5mm section (0.547 kg/RM weight) shutter shall be provided with handle and self locking arrangement interlocking style shall of 40x18x1045mm (0.607 kg/RM) pannel shall be of 6mm thick clear grade 6/2 Rs. 1.3mm polycarbonate shall the winoe shall be fixed to wall panel as per standard practice two shutter shall glazed and one shutter shall be wire gauged of aperture 1.40mm complete all as specified and as directed.
S&F Flush shutters 30mm with solid core construction, with block board core and plywood face panels, commercial type complete all as specified and as directed.
S&F for steel work in tubular trusses including special shaped washer etc, Complete using ERW or induction butt welded tubes conforming to I.S. 11611979 grade all as specified and as directed.
Pre-painted galvalume aluminum zinc coating Gl based corrugated profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating Gl based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for preparation of new previously untreated steel surface of any description (new galvanized steel surfaces) over 10cm in width or girth not otherwise described to receive painting by coating with mordant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of red oxide primer.
S&F mild steel plates, Fe-410 W (Gde-E250) quality B plain or chequred, 5 mm thick or over in thickness in available sizes.
S&F of mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewished, n exc 30cm long. Complete all as specified and as directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for providing 75mm thick plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection. Complete all as specified and as directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
Aluminium alloy, anodised 300mm sliding door with bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
Butt hinges, medium weight, cold rolled mild steel (100mm) and fixed complete all as specified and as directed.
Aluminium handles,cast type, anodised (150mm) complete all as specified and as directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed (200mm) complete all as specified and as directed.
Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Incl screed bed 15 mm thick in CM (1:4) complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L Glazed coloured ceramic tiles in vertical surface 600 x300 x10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10 mm thickness in CM (1:4) complete all as specified and as directed.
All as per above item No. 63 but as in skirting complete all as specified and as directed.
Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar complete all as specified and as directed.
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and as directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed.
Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar complete all as specified ad as directed.
M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.
M&L for Providing, cement concrete type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.
M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper incl 1 mm thick wall JK care putty over a coat of priming on plastered and other surfaces complete all as specified and as directed.
M&L for preparation of new surfaces of walls and applying two coats of Cement base paint over a coat of priming on plastered and other surface with priming paint complete all as specified and as directed.
M&L for preparation of old surfaces of walls and applying two coats of Oil bound distemper incl complete removal and 1mm thick JK wall care putty complete all as specified and as directed.
M&L Preparation of new wooden surface of any description and two coat of synthetic enamel paint, not otherwise described,over 10cm width or girth complete all as specified and as directed.
M&L Preparation of old wooden surface of any description and two coat of synthetic enamel paint, not otherwise described,over 10cm width or girth complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets complete all as specified and as directed.
M & L for veneered 6mm decorative plywoode,grade 1 (with BWR resin) with decorative face veneers on both faces,in wall fixed with screws to timber frame work complete all as specified and as directed.
M & L for veneered 6mm decorative plywoode,grade 1 (with BWR resin) with decorative face veneers on both faces in ceiling fixed with screws to timber frame work complete all as specified and as directed.
M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceed 1.5 Sqm complete all as specified and as directed.
S&F Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. . & drawing
Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm complete all as specified and as directed.
S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 30mm thick 2nd Class Soft Wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F 35mm thick 2nd class hard wood plain framed, shutter factory made with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 complete all as specified and as directed.
S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane complete all as specified and as directed.
S&F Sheet frosted glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane complete all as specified and as directed.
Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.
Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed complete all as specified and as directed.
Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
Aluminium handles 100 mm , cast type,anodised complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section in any position unframed work complete all as specified and as directed.
S&F 2nd class softwood in scantling clean swan timber framed and fixed to the position to replace old and decayed timber complete all as specified and as directed.
Dismantling timber in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section in any position unframed work complete all as specified and as directed.
M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but not exc 25 sqcm in section complete all as specified and as directed.
S&F in repairs 20 mm Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs gate valves 20 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated complete all as specified and as directed.
Taking down and replacement with 16mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors complete all as specified and as directed.
Taking down and replacement with 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and directed.
S&F in repairs Bib taps in bore dia of pipe 15mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), incl pvc seat and cover for pedestal pan white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.
S & F PVC valveless, syphonic action type, flushing cistern 10 ltrs, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 60 cm long of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed.
S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal complete all as specified and as directed.
S&F in repairs angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated complete all as specified and as directed.
S&F in repairs CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed.
S&F in repairs CP health faucet hand held triggered nozzle and delivers a spray of water with pipe complete all as specified and as directed.
S&F in repairs Brass CP centre hole basin mixer complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubing complete all as specified and as directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.
S &F in repair stainless steel curtain rod fixing with stainless steel brackets and funnels stops, rollers etc complete all as specified and as directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long complete all as specified and as directed.
S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages complete all as specified and as directed.
Note:- Schedule of credit Rs. 22,713.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
NAJAR ENTERPRISES
M/s Shabir Ahmed Mir and Bros
M/S IQ ENTERPRISES
M/S LONE BUILDERS AND SUPPLIERS
M/S DAR ELECTRICALS
ALI MOHD NAJAR
M/S GHULAM RASOOL LONE
M/S BILAL CONSTRUCTION AND CO
M/s FAYAZ AHAMD WANI AND SONS
M/S ALTAF HUSSAIN KHUROO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .