Supply and Installation of LAN and EPABX at new Office Building PWD Road Maintenance Division and Sub Division PMG Thiruvananthapuram

Amount

Part I - LAN at office of the Assistant Executive Engineer, Road Maintenance Sub Division

Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x Gigabit SFP (2 combo) ports, web manageable supporting ipv6 having 512 MB RAM, 256 MB flash memory, AC 120/230V. Warranty: 3 Year Preferred Make: Allied Telesis, Brocade, Cisco, HP or equivalent

Supply & Installation of Wireless Router Modem ADSL2+, 4port router with WiFi, RJ11 input, two antennas, power input-220V AC, including patch cords etc. Preferred Make: D-Link, Netgear, TP-Link or equivalent

Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with SMB, one number of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with SMB, two numbers of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply, laying, certification and documentation of 23 AWG CAT-6 UTP cable through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and providing 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply & providing 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and fixing of 20mm medium gauge PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 25 mm medium guage PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50 cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: MK, OBO, Legrand or equivalent

Supply and fixing 19'', 6U, Network Rack with ACDB 6 port, PVC Wire Slotted Cable Channel etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Part II - LAN at office of the Executive Engineer, Roads Maintenance Division

Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x Gigabit SFP (2 combo) ports, web manageable supporting ipv6 having 512 MB RAM, 256 MB flash memory, AC 120/230V. Warranty: 3 Year Preferred Make: Allied Telesis, Brocade, Cisco, HP or equivalent

Supply & Installation of Wireless Router Modem ADSL2+, 4port router with WiFi, RJ11 input, two antennas, power input-220V AC, including patch cords etc. Preferred Make: D-Link, Netgear, TP-Link or equivalent

Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with SMB, one number of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with SMB, two numbers of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply, laying, certification and documentation of 4 pair 23 AWG CAT-6 UTP cable through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and providing 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply & providing 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and fixing of 20mm medium gauge PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 25 mm medium guage PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50 cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: MK, OBO, Legrand or equivalent

Supply and fixing 19'', 12U, Network Rack with ACDB 6 port, PVC Wire Slotted Cable Channel etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Part III - LAN at office of the Executive Engineer, Bridges Division

Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x Gigabit SFP (2 combo) ports, web manageable supporting ipv6 having 512 MB RAM, 256 MB flash memory, AC 120/230V. Warranty: 3 Year Preferred Make: Allied Telesis, Brocade, Cisco, HP or equivalent

Supply & Installation of Wireless Router Modem ADSL2+, 4port router with WiFi, RJ11 input, two antennas, power input-220V AC, including patch cords etc. Preferred Make: D-Link, Netgear, TP-Link or equivalent

Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with SMB, one number of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with SMB, two numbers of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply, laying, certification and documentation of 4 pair 23 AWG CAT-6 UTP cable through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Molex, R&M or equivalent

Supply and providing 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply & providing 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply and fixing of 20mm medium gauge PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 25 mm medium guage PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50 cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: MK, OBO, Legrand or equivalent

Supply and fixing 19'', 6U, Network Rack with ACDB 6 port, PVC Wire Slotted Cable Channel etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Part 1 - EPABX System

Supply, Installation and Commissioning of wall mountable/ <=2U size rack mountable TEC approved ISDN compatible Digital IP enabled EPABX with power supply, expandable up to minimum 48 extensions intially equipped with 1) 24 analog extensions 2) 2 Digital extensions 3) 4 Trunk extensions Preferred Make: Alcatel Lucent, Avaya, Coral, Digium, Fortivoice, Matrix, NEC, Panasonic or equivalent

Supply, Installation and commissioning of Caller ID phones (DTMF) with glass epoxy PCB, including patch cables. Preffered model: BEETEL M-53/ Binatone Concept 700 or Equivalent

Supply, Installation and commissioning of Electronic push button DTMF telephone with glass epoxy PCB, including patch cables. Preffered model: BEETEL C-11/ Binatone Spirit111/ BPL 5499 or equivalent

Supply & Laying of 10 pair PVC Telephone cable of conductor size 0.5 mm ATC copper in the existing PVC conduits/ oval conduits/casing-n-capping etc as required. Preferred Make: RR Kabel, Finolex or equivalent

Supply and Laying of 2 pair PVC Telephone cable of conductor size 0.5 mm ATC copper in the existing PVC conduits/ oval conduits/casing-n-capping etc as required. Preferred Make: RR Kabel, Finolex or equivalent

Supply and Installation of <=3U size rack mountable unit of minimum 3 numbers of 2/10 IDC modules (Disconnection modules) sub rack.

Supply and fixing of door type junction boxes with lock suitable for 50 pair and fitted with 5 numbers of disconnection modules (Krone make)

Supply and fixing of door type junction boxes with lock suitable for 10 pair and fitted with 1 number of disconnection modules (Krone make)

Supply and fixing of 20mm medium gauge PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 25 mm medium guage PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50 cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supplying and providing of ISI Pipe earthing as per IS 3043 with 1.5 metre long 40mm dia.B' class GI Pipe, providing GI Funnel with weld mesh, fixing GI Strip of size 50x 6 mm with minimum length of 20 cm clamped with 50x5mm GI flat using 12x10mm GI bolt and nut at top of the GI pipe as test joint. Filling around the GI pipe at a radius of 15 cm with a homogeneous mixture of charcoal, common salt and river sand or earthing compound, filling the rest of the portion with excavated soil including watering and ramming providing brick work (20 cm ) masonry at the top in 1:6 cement mortat, plastering the inside and top of the manhole with thick 1:6 cement mortar and providing gully trap with C.I covering at the top.

Earth leads-supply and clamping of No.10 SWG copper wire through the existing PVC conduits/ oval conduits /casing-n-caping etc as required making good the damages, colour washing etc as required

ATLANTA COMPUTERS

a dot computers