Up-gradation of Mohanpur CHC to 50 bedded Sub-Divisional Hospital, West Tripura /Construction of Hospital building (G plus 3), Type III Qtr. (S plus 5), Type II Qtr. (S plus 5), Type I Qtr. (S plus 5), Morgue, Kitchen

SUB-HEAD : CEMENT CONCRETE WORK

Centering shuttering including struttings, propping etc. and removal of form work for:

Foundations, footings, bases for columns.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

SUB-HEAD : RCC WORK

1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with

1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Centering shuttering including struttings, propping etc. and removal of form work for:

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply

Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply

Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply

Stairs (excluding landings) except spiral-staircases with wooden plank

Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.

Weather shade, Chajjas, corbels etc., including edges.

50 mm thick

Thermo-Mechanically Treated bars of grade Fe-500D or more

Thermo-Mechanically Treated bars of grade Fe-500D or more

SUB-HEAD : BRICK WORK

In cement mortar 1:4 ( 1 cement : 4 fine sand ).

In cement mortar 1:6 ( 1 cement : 6 fine sand ).

In cement mortar 1:6 ( 1 cement : 6 fine sand ).

In cement mortar 1:4 ( 1 cement : 4 fine sand ).

In cement mortar 1:6 ( 1 cement : 6 fine sand ).

In cement mortar 1:4 ( 1 cement : 4 fine sand ).

Fixed to openings /wooden frames with rawl plugs screws etc.

Single rubber stopper

SUB-HEAD : STEEL WORK

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-

Anodised aluminium of grade AC 15.

Single socketed pipe - 110 mm OD

SUB-HEAD : FINISHING WORK

12 mm cement plaster of mix

In cement mortar 1 : 4 ( 1 cement : 4 fine sand )

In cement mortar 1 : 6 ( 1 cement : 6 fine sand )

15 mm cement plaster on the rough side of single or half brick wall of mix:

In cement mortar 1 : 6 ( 1 cement : 6 fine sand )

6 mm cement plaster of mix:

In cement mortar 1 : 3 ( 1 cement : 3 fine sand )

Neat cement punning.

White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.

W.C. pan with ISI marked white solid plastic seat and lid

Single socketed pipe - 110 mm OD

15 mm nominal outer dia .Pipes.

20 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

20 mm nominal outer dia .Pipes.

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing brass stop cock of approved quality :

15 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

25 mm nominal bore

Providing and fixing gun metal non-return valve of approved quality (screwed end):

25 mm nominal bore

15 mm nominal bore

15 mm nominal bore

With Second Class bricks

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :