Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | L1 | Accepted-AOC L1 Hence accepted | |
| 2 | L2₹11.8 L+₹25,592.87 (2.22%)Rejected-AOC | L2 | Rejected-AOC L2 Hence rejected | |
| 3 | L3₹12.0 L+₹44,898.14 (3.89%)Rejected-Finance | L3 | Rejected-Finance L3 Hence rejected | |
| 4 | Rejected-Technical | - | Rejected-Technical L5 Hence rejected | |
| 5 | Rejected-Technical | - | Rejected-Technical L4 Hence rejected |
Tender Value
₹13.4 L
EMD Value
₹33,500
Closing Date
21 Jan 2020, 3:00 pmClosed
AEE, PWD Bldgs sub division, EKM
O/o AEE, PWD Bldgs sub division, EKM
2018-19-Constructing parking area and roofing for bio gas plant, Govt Ayurveda College, Thrippunithura
2020_PWD_335561_1
16/AEE/BL/EKM/19-20
Open Tender
Civil Works - Buildings
Item Rate
120 days
Thrippunithura
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
online
₹33,500
28 Feb 2020
13 Jan 2020
23 Jan 2020
14 Jan 2020
21 Jan 2020
14 Jan 2020
14 Jan 2020 - 21 Jan 2020
Amount
estimate
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
od12535/2018_2019 : Dismantling and resetting cement concrete inter locking tile flooring (6-8 cm thick) over a bed of 12mm broken stone not less than 10cm thick after compacting the bed with vibrators and finish the top in lines and levels and compacted etc completed
16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
od27260/2019_2020 : Engaging coolie
P.P.Mani
POLLY MATHEW
SHALJU VARGHESE KATTUPARAMBIL
K P ANTONY
Shivin Ravi
Bidder Name
K P ANTONY
POLLY MATHEW
madhu
P.P.Mani
Shivin Ravi
SHALJU VARGHESE KATTUPARAMBIL
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_468083.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .