Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹14,000
Closing Date
6 Sept 2022, 6:55 pmClosed
Executive Engineer Mech. Irrig. Div.Baramulla
Mech. Irrig. Div.Baramulla
DESIGN, MANUFACTURE, SUPPLY, INSTALLATION, TESTING and COMISSIONING OF 3 CUSEC 09M HEAD HORIZONTAL PUMPING UNITS AT LIFT IRRIGATION SCHEME LUGRIPORA UNDER PRI.
2022_IFC_183731_1
eNIT 34 of 2022-23
Open Tender
Pumps/Motors
Item Rate
75 days
Sopore
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
Executive Engineer Mech. Irrig. Div.Baramulla
₹14,000
Yes
7 Sept 2022
12 Aug 2022
7 Sept 2022
12 Aug 2022
6 Sept 2022
12 Aug 2022
Amount
Design /Supply/Installation/Testing and commissioning of horizontal pumping units with AC induction squirrel cage motor as per following specifications: A.PUMP :- [02 units] 1. Type:- Horizontal pumping unit. Split casing/End suction type. 2. Discharge:-03 cusec 3. NPSH at site:-3.5 Mtr 4. NPSH at duty point:-to be designed 5. Dynamic Head:-09mtr. 6. Stage : Single 7. Liquid to be handled: Raw water with foreign particles 8. Type/Material of Impeller---- closed/semi open / Bronze IS 318 or LTB2 9. Material of Impeller nut : S. Steel 10. Material of pump shaft--- AISI S.S-410 11. Material of Shaft sleeves--- S.S-410 (or as per OEM) 12. Material of pump Casing:- Close fine grained conforming to IS 210 GR20 13. Material of casing liner/neck ring: Bronze IS 318 /S. Steel 14. Material of Gland: Bronze 15. RPM— 1450 16. Suction: 200mm (or as per OEM) 17. Delivery: 200mm (or as per OEM) 18. Bearing:- as per OEM 19. Duration of operation: 24 Hr- continuous 20.Noise/Vibration level: As per HIS 21. Coupling: Flexible Rubber Tyre coupling 22. Sealing arrangement:- Gland packed 23. Base plate: Mild steel as per IS 2062:1992 24. Efficiency: above 80% at duty point 25. Make:-Kirlosker/ WPIL/M&P/Wilo/Flowmore/equivalent as approved EOI issued by SE Mech Kashmir I&FC Dept. Note: Full range characteristic curves must be appended with the tender, without which the offer shall not be entertained. B. PRIME MOVER:- [02 units] 1. Type:- AC squirrel cage induction motor 2. Power supply:- 380V + 10%, 3- phase, 50+ 3 HZ AC 3. Duty:- S1-continuous 4. Class of insulation :F 5. Working Altitude: above 1500m 6. H.P:- 25 HP (or as per OEM) 7. RPM:-_____1450________. 8. Mounting:-Horizontal foot mounted solid shaft motor. 9. Enclosure: TEFC 10.Deqree of protection: IP55 11. Ambient temp: 500C 12. Efficiency : Not less than 88% on full load 13. Make:-ABB/Crompton/ Kirlosker. C. Spare parts:- Rubber tyre Coupling, reqd. size packing I kg, Foundation bolts, Motor Thimbles, cooling pipes, required size tools for maintenance. Note: The job shall also include providing and fitting of suitable size Cu/Al Thimbles, dully crimped and taped to the Motor and starter cables.
AA Enterprises
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .