ADDN/ ALTN AND REPAIR OF WORKSHOP REPAIR BAY BLDG NO P-412 OF FD WKSP AT MIL STN DHRANGADHRA

Amount

Dismantling of asbestos cement (corrugated, semi corrugated) sheets in roof coverings complete all as specified and as directed. Note:- Work has to be executed at 12 Meter height approximate from Ground level.

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note:- Work has to be executed at 12 Meter height approximate from Ground level.

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note:- Work has to be executed at 12 Meter height approximate from Ground level.

Dismantling wrought iron or mild steel work (at to 12 meter height approximate from ground level) of any description not otherwise provided for complete all as specified and as directed.

Supply and fixing of Rolled section as in main and cross beam hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Gde Fe 410 -W (Gde- E- 250) quality- A including one shop coat of zinc chrome primer complete all as specified and as directed. Note:- Work has to be executed at 12 Meter height approximate from Ground level.

Supply and fixing of Mild steel for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, clats and confirm to Gde Fe 410 -W (Gde- E- 250) quality- A including one shop coat of zinc chrome primer complete all as specified and as directed.

Supply and fixing mild steel work in plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk forcing holes, without any attachment to Fe-290 (Gde E-165) complete all as specified and as directed.

Supply and fixing mild steel bolts purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long dia of neck in exceeding 12 not exceeding 20mm complete all as specified and directed.

Material and labour for preparation of old wooden surface of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Demolition of brickwork or stone masonry, built in cement mortar including all quoins, arches, pillars but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for walling of random rubble stone masonry built in cement mortar 1:6, uncoursed, brought upto courses, well bonded, bedded and solidly hearted complete all as specified and as directed.

Material and labour for walling of random rubble stone masonry built in cement mortar 1:6, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, but except stone complete all as specified and as directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm for sand stone and dressing to face stones and dressing of face beds and joints of random rubble walling, uncoursed or brought upto courses completed as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks exceeding 10 cm in width, of PCC 1:2:4, Type B1 (using 20mm graded aggregate) and setting in cement mortar 1:6 complete all as specified and as directed.

Material and labour for plain cement concrete, 1:2:4 type B1 (using 20mm graded stone aggregate) for pedestal/ coping, Bed block for post including necessary form work, finishing even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Cement concrete 1:3:6, Type C1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends complete all as specified and as directed.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth, without using extra lime or cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick/ stone work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement plaster in cement mortar 1:4 in two coats, (10mm thick rendering coat in cement mortar 1:4, 5mm thick second coat mixed with water proofing compound as per manufacturer instructions) on fair faces of brickwork/ concrete work, finished even & smooth without using extra cement complete all as specified and as directed. Note:- WPC will be measured and paid seperately under respective item.

Material and labour for preparing new plastered or un-plastered of ceilings surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparing new plastered or un-plastered of wall surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparing new plastered wall surfaces and applying two coats of oil bound destember over one coat of chalk whiting complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.

Supply and fixing of 1.25mm thickness of laths steel rolling shutters size exceeding 15 sqm and not exceeding 25 sqm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete, Mechanical moter operated with 5 HP Mechanical moter for gear operated type with chain wheel and hand chain/ crank handle complete all as specified and as directed. Note : Each Job shall be completed after supply, fixing & making operational of the Job.

Supply and fixing of 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles as required complete all as specified and as directed.

Supply and fixing of Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Supply and fixing of Ball bearing for rolling shutters complete all as specified and as directed.

Material and labour for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surface of wall and appling one coat of oil bound destember over one coat of chalk whiting complete all as specified and as directed.

Material and labour for preparing old plastered or un-plastered walls surfaces and applying one coats of white wash on walls complete all as specified and as directed.

Material and labour for preparation of old plastered or un-plastered surfaces of wall and applying one coats of cement base paint over one coat of primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) complete as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in floors, finishing and uniformally mixed polyster triangular fiber as secondary reinforcement in all types of concrete and mortars *@ 0.25% by weight of cement) finishing the surface even and smooth using extra cement complete all as specified and as directed.

Material and labour for forming 100mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound Grade ‘B’ complete all as specified and as directed.

Material and labour for 75mm thick cement concrete 1:3:6 type C2, (using 40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B’ complete all as specified and as directed.

Material and labour for 75mm thick cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) complete all as specified and as directed.

Material and labour PCC 25mm thick cement concrete 1:2:4, type B1, (using 20mm graded stone aggregate) as in sub-base to receive floor finishes complete all as specified and as directed.

Material and labour for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in floors over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Non-skid joint free coloured ceramic tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors, over 15mm thick screed bed in cement mortar 1:4 complete as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Material and labour for vitrified ceramic tiles, light shade, 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in dado/ skirting, over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed

Material and labour for joint free coloured glazed ceramic tiles of size 300 x 200 x 7mm/ 350 x 250 x 7mm/ 450 x 350 x 7mm thick on vertical surface such as skirting/ dado, set and jointed in net cement slurry and pointed in colour cement to match over 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450 x 350 x 7mm thick High lighter tiles on vertical surface such as skirting/ dado, set and jointed in net cement slurry and pointed in colour cement to match over over 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, Type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Material and labour for providing Water Proofing Treatment to RCC Roof surfaces with APP Membrane in the following steps. (a) Material and labour for Rendering 10mm thick on fair faces of concrete surfaces as on PCC padding in cement motar 1:3 mixed with liquid water proofing compound as per manufacturer instruction and finish the surface even and smooth without using extra cement for laying APP membrane at non-accessible roof (mumty) all as directed. (Note :- water proofing compound shall be measured and paid seperately.) (b) Material and labour for preparation of plastered surface of roof slab by throughly wire brushing, washing, dried up, cleaning all foreign mater and dust and applying one coat of approved bituminous primer @ 0.40 liter per sqm complete all as specified and as directed. (c) Material and labour for 3mm thick APP modified polymeric membrane of minimum weight 3 kg/ sqm and reinforced with non woven polyster reinforcement shall be laid by torch application method over primed surface of roof slab. Note:- APP modified polymeric membrane shall all as specified. The side overlaps shall be minimum 75mm and end laps shall be minimum 100mm. All Overlaps shall be sealed as per manufacturer's instructions complete all as specified and as directed.

Material and labour for applying evenly one tack coat of industrial bitumen 85/ 25 at the rate of 1.2 kg/ sqm including cleaning the surface complete all as specified and as directed.

Supply only, integral water proofing compound complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and as directed.

Taking down old shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in same opening after easing and adjustment complete all as specified and as directed.

Supply and fixing of 30mm thick factory made solid panel PVC door shutter, style consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete all as specified and as directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and as directed.

Material and labour for rolled mild steel angle iron or other section with gusset plates, rails, braces complete, drilled for fixing of steel sheeting or other covering doors work as in door frames complete, drilled for fixing of hinges also fastening and fixing conforming to Fe-290 (Gde-E-165) complete including the foregoing items if structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) complete all as specified and as directed.

Material and labour for cutting holes in stone walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, Type B1, exceeding Half brick but not exceeding one brick , (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified and as directed.

Material and labour for preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint and sanding newly tarred or painted surfaces with clean sharp sand compelete all as specified and as directed.

Material and labour for 35mm thick, Ist class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of 12mm veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

Material and labour for aluminium anodised powder coating sections for doors/ windows/ ventilators with one or more rebates including joining cleat for fixing in sliding channel or frame with locking, complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills complete all as specified and as directed. Note:- Prelaminated Particle Board, Sheet glass, wire cloth, Door closer hydraulically regulated, Floor door spring, lock, Grill/ guard bar, Hinges, Handle, tower bolt, door stopper shall be measured and paid seperately.

Material and labour for 12mm thick Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in aluminium door panels/ partition of any size fixed with screws to timber framework complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) not exceeding 0.5 Sqm each pane from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all,as specified and as directed.

Material and labour for 3mm thick sheet glass in square not exceeding 0.5 sqm in each pane, ordinary quality and glazing with oil putty complete all as specified and as directed.

Material and labour for 3mm thick sheet glass in square not exceeding 0.5 sqm in each pane in ground or obscured or frosted on one side, pin headed type and glazing with oil putty complete all as specified and as directed.

Supply and fixing of 4.8mm thick Sheet glass, in square exceeding 0.5 Sqm in each pane, ordinary quality with necessary rubber gaskets complete all as specified and as directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of Door closer hydraulically regulated, Aluminium (extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and fixing in repair Door closer hydraulically regulated, Aluminium (extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and fixing od Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed omplete all as specified and as directed.

Supply and fixing of Mortice lock, brass, four lever, verticle type, size 100mm complete all as specified and as directed.

Supply and fixing in repair Mortice lock, brass, four lever, verticle type, size 100mm complete all as specified and as directed.

Supply and fixing in repairs anodised aluminium Grill (anodised transparent or dyed to required shad according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standrd section and fixed to the existing window frame with CP brass/ stainless steel screw @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing and operation of handeles and fixing of approved anodised aluminium standard section around the opening all complete as per requirement and as directed of Engr-in-Charge.

Supply and fixing of 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fixing of 100mm size Butt hinges, med weight, cold rolled, mild steel and fixed complete all as specified and as directed.

Supply and fixing of 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing in repair, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing of 100mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

Supply and fixing in repair, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing of 150mm long size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing in repairs, 150mm size long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing of aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and fixing of aluminium alloy, anodised, sliding door bolt of size 250mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and fixing of 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and as directed.

Supply and fixing in repair 20mm dia, stainless steel, fancy type, tubular curtain rod fixed on decorative brackets with decorative globe at both end complete all as specified and as directed.

Supply and fixing in repair, stainless steel, fancy type Brackets decorative with fancy type globe at both end curtain rod for 20mm dia curtain rod complete all as specified and as directed.

Supply and fixing of 18/ 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged fixed in repairs complete all as specified and as directed.

Material and labour for 6mm thick external teak wood lipping fixed to18/ 19mm thick block or Veneered particle boards with nails complete all as specified and as directed.

Supply and fixing of continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40mm complete all as specified and as directed.

Supply and fixing of 125mm in size hasp & staples safety type aluminium anodised fixed with screws complete all as specified and as directed.

Material and labour for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fixing in repair, kitchen sink with drainage board made of stainless steel 1mm thick including supply and fixing of 32mm CP waste coupling, plug, washer, 32mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30 x 30 x 4mm and flat iron 25 x 3mm both duly painted with two coats of synthetic enamel paint over one coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B1 (using 20mm graded stone aggregate) and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fixing of kitchen or laboratory sinks of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, made of 1mm stainless steel sheet, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 25mm bore of pipe complete all as specified and as directed.

Supplying and laying of CPVC pipes of 16mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of CPVC pipes of 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of CPVC pipes of 25mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

Supply, hoisting, fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, including fixing arrangement for inlet/ outlet/ over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed. Note:- The water tank shall be contractor's supply.

Supply, hoisting, fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, including fixing arrangement for inlet/ outlet/ over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed. Note:- The water tank shall be contractor's supply.

Supply and fixing in repair, 20mm bore, Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed (Minimum weight -210 Gms).

Supply and fixing in repair, 25mm bore, Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed (Minimum weight -210 Gms).

Supply and fixing in repairs 20mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs 25mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Dismantling 110mm/ 75mm bore cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar/ any joint and removing from wall/ floors complete all as specified and as directed.

Supply and fixing of 75mm bore PVC (SWR) pipes, single socketed in any length jointed with rubber ring joints laid in trenches or floor complete all as specified and as directed.

Supply and fixing of 110mm bore PVC (SWR) pipes, single socketed in any length jointed with rubber ring joints laid in trenches or floor complete all as specified and as directed.

Supply and fixing of 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and as directed.

Supply and fixing of 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and as directed.

Supply and fixing of 75mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified and as directed.

Supply and fixing of 110mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified and as directed.

Supply and fixing of 75mm bore PVC (SWR), vent cowl complete all as specified and as directed.

Supply and fixing of 110mm bore PVC (SWR), vent cowl complete all as specified and as directed.

Supply and fixing in repair, PVC (SWR) floor trap with chromium plated grating including jointing with solvent cement, suitable for PVC (SWR) outlet pipe of 75mm bore complete all as specified and as directed.

Supply and fixing in repairs, PVC (SWR) gully trap of size 125/ 110mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repair, bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and as directed.

Supply and fixing in repairs, stop valves, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and as directed.

Supply and fixing in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and as directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

Supply only Pillar taps cast copper alloy with capstan head, chromium plated, fancy type screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes of 15mm bore complete all as specified and as directed.

Supply and fixing in repair, Grating, square shape, 150mm size of PTMT (minimum weight 100gms) complete all as specified and as directed.

Supply and fixing in repair, brass chromium plated towel rail 60cm long 'D' type complete all as specified and as directed.

Supply and fixing of 32mm bore, low density polyethelene pipe (HDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors complete all as specified and as directed.

Supply and fixing in repair Vitreous squatting pan, 'Orissa' pattern, white of size 580mm x 440mm with intergral foot rest (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, anty syphonage pipe with PVC cover sheet in same colour complete all as specified and as directed.

Supply and fixing of Health faucet 1.25 metre PVC tube with wall hook complete for EWC complete all as specified and as directed.

Supply and fixing in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever complete all as specified and as directed.

Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Material and labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix, 40mm thick in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's specifications/ instructions and as directed. Note:- (New reinforcement or Welded wire fabric) will be measured and paid separately)

Supply and fixing of welded steel wire fabric, cut to length, fixed to steel members/ reinforcement steel weight per sqm not exceedign 4 Kg complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for 18-20mm thick black granite stone slab machine cut in skirting/ dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of reinforced cement concrete of chajjas and similar suspended work complete all as specified and as directed.

Formwork to flat fair finished surfaces of concrete of chullah hoods, chajjas, troughs, slab, shelf and similar items including edges complete all as specified and as directed.

Material and labour for RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in suspended slabs supported on walls/ columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for pre-cast reinforced cement concrete 1:2:4, type B1, (using 20mm graded stone aggregate) as in manhole covers including placing the cover in position and set in cement mortar 1:6, complete all as specified and as directed. Note: Reinforcement shall be measured and paid seperately.

Material and labour of reinforcement steel TMT Bars, 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fixing 2mm thick fibre glass reinforced translucent/ polycarbonate plain/ corrugated sheetings with two corrugations side lap fixed with L-type or J-type or cranked hook bolts or screwed with coach screw and washer as in roof, wall complete all as specified and as directed .

Material and labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dados and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Supply and fixing in repairs, 10mm thick PVC insulation panel with EPS stuck to 1mm thick plain PVC sheet suitably placed in false ceiling and made of Anodised aluminium snap grd frame work size 605 x 605mm as per specification and drawing complete all as specified and as directed.

Material and labour for repair to potholes of depth exceeding 30mm, not exceeding 1 sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sqm putting in premixed bituminous macadam well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and as directed.

Material and labour for preparing existing block top surface by brushing with wire brushes for removeing caked mud sweeping with brooms and finally fannig the cleaned surface with gunny bags to remove all loose dirt and applying evenly one priming/ tack coat with paving bituminous primer (80/100) VG 10 grade at 10 kg/10 Sqm complete all as specifed and as directed.

Material and labour for premix bituminous macadam (BM) 50mm thick for grading 2 as given in Table 500-10 on page No 177 of MORTH with 4.5% binder content (VG-40) by weight of total mix with rock dust filler 2% as per design mix using mechanical paver with string sensor with Marshal stability 9.0 KN at 60 degree C, laid to required gradient and camber complete all as specified and as directed.

Material and labour for preparing black top surfaces of roads by brushing with wire brushes for removing caked mud sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/ tack coat with paving bitumen (80/100) VG 10 grade at 05 kg/ 10 Sqm complete all as specifed and as directed.

Material and labour for providing 30mm thick consolidated thickness bituminous premixed semidense asphaltic concrete with 5.5% binder content (VG-30) by weight of total mix with hydrated filler 2% (if recommended in the trial mix) using mechanical paver, rolled and compacted to required camber and gradient to achieve a uniform smooth surface complete all as specified and as directed.

Material and labour for preparing bituminous surfaces of road and applying road marking paint, 2.5mm thick, width not exceeding 10cm like stop lines, dashes arrows with hot applied thermoplastic reflective paint of approved colour conforming to BS-3262-1989 with 20% glass beads (intermixed) spread and laid by automatic mechanical machine engine at approx temperature of 160 degree celcius with special appplicator machine all as per manufacturer instructions and as directed

Supply and fixing of cat eye, solar reflictive type of metal body alloy of size 100mm x 100mm x 20mm with PAMA Striplens reflector of model No DA 972.0 fixed with and including MS studs of suitable size all as per manufactures instructions and as directed.

Supply and fixing of solar cat eye, aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed all as per manufactures instructions and as directed.

Taking down carefully unserviceable copper/ aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings and making good the disturbed surfaces of walls, floors complete all as specified and as directed.

Material and labour for point wiring for one light/ fan/ bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/ fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and as directed by Engr-in-charge.

All as per Serial item No.157 here-in-before but for 6 Amp socket outlet on independent board complete all as specifed and as directed.

All as per Serial item No.157 here-in-before but for 6 Amp socket outlet on same board complete all as specifed and as directed.

All as per Serial item No. 157 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specifed and as directed..

Supply and fixing of modular switch, 1 way, 6A, 1 module complete all as specified and as directed.

Supply and fixing of modular switch, 1 way, 16A, 1 module complete all as specified and as directed.

Supply and fixing modular socket, 6A, 3 pin combined, 2 module complete all as specified and as directed.

Supply and fixing modular socket, 16A, 3 pin combined, 2 module complete all as specified and as directed.

Supply and fixing industrial socket, 32A with top, 3 pin combined, complete all as specified and as directed..

Supply and fixing of rigid non-metalic concealed PVC conduit of size 25mm dia inclisive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks complete all as specified and as directed.

All as per item No 166 here -in-above but of size 20mm dia complete all as specifed and as directed.

Supply and fixing of modular white cover plate with frame for 4 modules complete all as specified and as directed

Supply and fixing of modular white cover plate with frame for 6 modules complete all as specified and as directed.

Supply and fixing of modular white cover plate with frame for 8 modules complete all as specified and as directed.

Supply and fixing of modular metal flush box concealed type with 4 module for housing modular switches complete all as specified and as directed.

Supply and fixing of modular metal flush box concealed type with 6 module for housing modular switches complete all as specified and as directed.

Supply and fixing of modular metal flush box concealed type with 8 module for housing modular switches complete all as specified and as directed.

Supply and fixing of lamp holder (Angle/ bracket) insulated body with back plate for batten fittings complete all as specified and as directed.

Supply and fixing of LED Adore Lamp, 10W, B22 base, 6500K, CDL type complete all as specified and as directed.

Supply and fixing of Ceiling rose, 3 terminal, size 50 x 65mm, surface type, 230 volts complete all as specified and as directed

Supply and fixing of decorative box type LED light fitting, 1 x 18 Watt, 230 V, surfacce mounting, white powder coated CRCA sheet steel housing with crescent light opening in a perforated metallic frame complete with 18 W LED tube complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing of LED flat panel of size 2' x 2', 34 Watts, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and as directed by Engr-in-charge.

Supply and fixing of exhaust fan, 300mm sweep, 1400 rpm, MS body, heavy duty, AC single phase, 230 volts with blades, frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed

All as per item No 179 here-in-before but of size 450mm sweep complete all as specifed and as directed.

Disconnecting carefully and taking down the existing ceiling fan/ exhuast fan of any size and depositing to MES E/M store for safe custody complete all as specifed and as directed.

Supply and fixing of ceiling fans, 1200mm sweep, energy efficient, five star rated, 230 volts with bushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessories including connecting up with 3 runs of suitable size single core PVC insulated but unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and as directed.

Supply and fixing of LED energy efficient street light fitting, 30 watt, LED pressure die cast aluminium housing with heat resistant glass covered with IP-65 protection ncluding GI pipe as required length and size bracket with fixing accessories complete all as specified and as directed.

Material and labour for Sub main wiring complete with four single core 4 x 10 sqmm,1100 volts grade, PVC insulated FRLS, stranded copper conductor cable with one continuous copper earth conductor of 1 x 10 sqmm in concealed PVC conduit of 25mm dia complete all as specified and as directed.

Material and labour for Sub main wiring complete with four single core 4 x 6 sqmm, 1100 volts grade, PVC insulated FRLS, stranded copper conductor cable with one continuous copper earth conductor of 1 x 6 sqmm in concealed PVC conduit of 25mm dia complete all as specified and as directed.

Material and labour for Sub main wiring complete with two single core 4 sqmm, 1100 volts grade, PVC insulated FRLS, stranded copper conductor cable with one continuous copper earth conductor of 1 x 4 sqmm in concealed PVC conduit of 20mm dia complete all as specified and as directed.

Material and labour for Sub main wiring complete with two single core 2.5 sqmm, 1100 volts grade, PVC insulated FRLS, stranded copper conductor cable with one continuous copper earth conductor of 1 x 2.5 sqmm in concealed PVC conduit of 20mm dia complete all as specified and as directed.

Material and labour for Sub main wiring complete with two single core 1.5 sqmm, 1100 volts grade, PVC insulated FRLS, stranded copper conductor cable with one continuous copper earth conductor of 1 x 1.5 sqmm in concealed PVC conduit of 20mm dia complete all as specified and as directed.

Supply and fixing of sheet metal enlosure, concealed on wall with a triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB, 32Amps, including plug top, AC, 415volts and making good the distrubed area and matching with existing wall with colour complete all as specified and as directed.

Supply and fixing of sheet metal enclosure, vertical type, 8 way, TPN, double door, concealed on wall mounted, MCCBs as incomer is 3 pole V-Tec of 160A rating, 16 kA breaking capacity and outgoing MCB SP/TP, MCCB is pre-fitted at factory & including price of MCCB complete all as specified and as directed.

Supply and fixing of vertical 4 way TPN double door, concealed on wall mounted, MCCBs as incomer is 3 pole V-Tec of 100A rating 16 kA breaking capacity, MCCB is pre-fitted at factory & including price of MCCB, all as directed and as specified by Engineer-in-charge.

Supply and fixing of MCB DB concealed on wall, SPN 8 way, double door, with 200 amp rated busbar, 240 V complete all as specifed and as directed.

Supply and fixing of MCB DB concealed on wall, SPN 4 way, double door, with 200 amp rated busbar, 240 V complete all as specifed and as directed.

Supply and fix of MCB SPN 10-32A, 10 kA, C series, 230 Volts, complete all as specifed and as directed.

Supply and fix of MCB SP 6-32A, 10 kA, C series, 230 Volts complete all as specifed and as directed.

Supply and fixing of MCB TP 32 amps ,10KA, 415 V, 'C' series complete all as specifed and as directed.

Taking down Main switch/ DBs inluding MCBs of any make and type including teak wood board complete and making good the disturbed surfaces including colour wash complete all as specifed and as directed.

Taking down old unserviceable/ worn out aluminium sub main of any type and size complete all as specifed and as directed.

Supply and fixing of LED highbay 150 watt lumianaries a fine ventilation technology for better thermal management and its cutting edge LED technology with LED 150 watt and with flat white high transmission acrylic diffuser white/neutral white color temperature prewired with all hanging arrangements of the fitting as per site requirement such as steel rope, hooks complete all as specified and as directed by Engr-in-Charge.

Material and labour for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB as earth lead all as specified and testing on completion including provision of earth lead protected by 20mm dia light grade GI pipe & watering pipe shall be 15mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:- [i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M. [ii]. PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50 x 50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii]. Main earthing lead from earth electrode to panel/ DB upto 7.5 meter. [iv]. Funnel with watering pipe [GI pipe] 15mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v]. GI protection pipe of size 20mm bore light grade 7.5m

Supply and fixing of fabricated perforated, powder coated 16 guage thick, GI cable tray of size 250mm wide and 100mm high both side, including horizontal and vertical bends, tees, cross members and other accessories as required. The tray to be fixed by means of nut, bolt and washers with MS Flat or angle iron fixed on wall. complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe of size 4mm dia galvanised iron complete all as specifed and as directed.

Supply and fixing of Wall mounting fan, oscillating type, single phase with speed regulator step type 400mm sweep, complete all as specifed and as directed.

Supply and fixing of Wall mounting fan (Air circulators), heavy duty type single phase type 450mm sweep complete all as specifed and as directed.

Supply, installing, testing and commissioning of factory made wind driven ventilator of throat size 600mm with FRP base to match roofing sheet and variable angle elbow complete all as specified and as directed.

Excavation, in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for laying under ground cable in hard and dense soil and getting out complete all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by Engineer-in-Charge.

Removal of surplus excavated material to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Sand cushioning to under ground cable with dry sand locally available 8 cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified and as directed by Engineer-in-Charge.

Supply and laying un-reinforced pre cast concrete cable covers class LV, type-1, flat, of size 250mm x 150mm x 40mm all as specified and as directed by Engineer-in-Charge.

Supply and laying of Steel tubing light grade galvanised of size 80mm dia laid in trench for protection of cable complete all as specified and as directed.

Material and labour for cutting of road for laying of LT cable and making good to match with the existing using extra cement complete all as specified and as directed.

Material and labour for MCCB enclosure including MCCB 63 Amps, 16KA, TPN 415 Volts with thimbles, glands and fixing arrangements such as fastener, nuts, bolts complete as per the direction of Engineer-in-Charge.

Supply, lay, test connecting and commissioning underground cable LT 1100 volt grade heavy duty XLPE insulated armoured with aluminum stranded conductor complete laid in trenches/ fixed to poles/ drawn through pipes with suitable size cable glands criping type cable lugs complete all as specified and as directed of size 150 Sqmm 3.5 core. Note- Excavation, earthwork, sand cushioning, GI pipe protection, cable cover shall be measured and paid separately.

All as per item No 214 here-in-before but of size 95 sqmm 3.5 core complete all as specifed and as directed.

All as per item No 214 here-in-above but of size 16 sqmm 4 core complete all as specifed and as directed.

All as per item No 214 here-in-above but of size 10 sqmm 4 core complete all as specifed and as directed.

Supply and fixing of Earth continuity GI strip of size 32 x 6mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe complete all as specified and as directed.

Material and labour for pipe Chemical earthing with GI pipe electrode 2.25m long having outer pipe nominal dia 80mm & inner dia 50mm dily filled with highly condictive and corrosive compound of required quantity having chemical Betonite 40%, Copper sulphate 20%, Gypsum 5%, Grafite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% Buried in ground digging a bore of 150mm dia surrounded by soil friendly backfill compound non solube in water including connection with and including GI strip 32 x 6mm upto 7.5m PCC pit with RCC cover complete all as specifed and as directed. Note : Rate quoted by tenderers shall be deemed to include for following provisions:- [i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M. [ii]. PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50 x 50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii]. Main earthing lead from earth electrode to panel/ DB upto 7.5 meter.

Dismanteling of LT Panel carefully after disconnecting electric supply, indoor/ outdoor type with fittings and fixtures complete all as specified and as directed.

Design, supply, installation, testing and commissioning of indoor type heavy duty electrically operated flame proof double girder overhead travelling crane (EOT) without girder, designed and manufactured as per IS: 3177 & IS: 807 (Latest), Class-II capable to handle 2 (two) Ton load with center to center clear span 10.50 meter (approx) and bay length 76 meter (approx) suitable for operation on 415 volts 3 phase 4 wire AC supply system with necessary steel supporting structure with clear hook height 4.5 to 6 meters from FFL, including all electrical components, starter, control, cable safety contol etc., floor operated with moveable pendants control to be operated by means of push buttons from floor level independently of crab position with protective panel including down shop lead (DSL) trilling cable for CT motion and shrouded bus bar type DSL GI 100A for LT motion including painting of existing girder with 2 coats of fire resistance paint after preparation of surface as per manufacturer specification and all as per standard norms for the technical parameters including supply and fixing of 32mm square bar rail complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Contractor shall submit complete drawings with specification of material (for EOT Crane) and same shall be got approved by Engr-in-Charge & GE. (ii) EOT Crane to be tested by authorized Govt Agency and test report to be submitted by the contractor. (iii) Manufacturer's original test certificate/ operating manual/ original purchase voucher shall be submitted by the contractor. (iv) EOT Crane shall be got tested & commissioned by IEM. (v) Dead load of the EOT crane shall be less than 4600 Kg.

Taking down carefully EOT crane (without girder) electrically operated complete with span 9.9 meter, lift 4.5 to 6 meter of capacity 2 tons including GI bus bar, LT rail 40 x 40mm sq bar per meter, LT walkway, nuts, bolts, washers and complete set to be deposited in MES store yard complete all as specified and as directed.

ALBA AC AND REF SERVICES (BID ID -3135530)

M/s Matadeen Ramchandra Agarwal (BID ID -3129242)

Pioneer Enterprises (BID ID -3129425)

M/s L. K. Agarwal (BID ID -3129413)

L G BUILDERS (BID ID -3129539)

S AND A ENGINEERS CONSTRUCTION CO (BID ID -3129414)

LUMOS INFRA PVT LTD (BID ID -3129285)