WB/37/APAS-20/BDOKNT/25-26/21

P.W.D (Building )2027 ,Page No -01 of 315, Item No-2(a) Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge a) upto 3 m depth,(iv) Without pumping out water and shoring

P.W.D (Building)2017,Page No -35 of 315, Item No-22 (II)(a) 3rd CORRIGENDA (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety [In ground floor]

P.W.D (Building)2017,Page No -43 of 315, Item No-36 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

PWD Building Schedule 2017,Page No -189 of 315, Item No-1(ii)© Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] c) 10 mm thick plaster

PWD Building Schedule 2017,Page No -192 of 315, Item No-15 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m

PWD Roads Schedule 2018,Page No -304 of 315, Item No-13.03 Providing weep holes in Brick masonry /plain/reinforcement concrete abutment,wing wall/returnwall with 100 mm dia AC Pipe , extending through the full width of the structure with drawing grand technical specifications.

P.W.D (Roads)2018/270/08.07 Providing and fitting Concrete Sign Board as per IRC specification of size 900x750x37 mm thick made with RCC 1:1.5:3 with N.B. variety stone chips reinforced with duble layer IRC febric (75x75 mm mesh) and fixed with necessary nuts & bolts on two RC precast posts 100mm x150 mm of height 2.65 m of which top 750 mm is of 100 x13 mm and 1.90 m above GL & 0.75 m below GL including digging hole, repacking the same with cement concrete 1:3:6 with local stone chips etc. complete including painting two coats on noth faces lettering sign marks etc. as per direction of Engineer-in charge.

Add:- GST @ 18%

Add:- Labour Welfare Cess @ 1%