Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-Finance | L1 | Accepted-Finance L1 BIDDER | |
| 2 | L2₹5.0 L+₹149.20 (0.03%)Rejected-Finance | L2 | Rejected-Finance L2 BIDDER | |
| 3 | L3₹5.0 L+₹5,222.12 (1.05%)Rejected-Finance CHUNAKHALI BASANTI SOUTH 24 PARGANAS WEST BENGAL 743 611 | BASANTI | SOUTH 24 PARGANAS | WEST BENGAL | 743611 | L3 | Rejected-Finance L3 BIDDER |
Tender Value
₹5.0 L
EMD Value
₹9,947
Closing Date
28 Aug 2026, 4:00 pmClosed
E.E./CED 1
O/O EE/CED-I MAYUKH 4th FLOOR BIDHAN NAGAR KOL 91
Additional work related to remodelling and reorientation of Office spaces in the 3rd floor of Mayukh Bhavan for DoSA along with renovation of toilet under Civil Engineering Division No-I, Department of Sundarban Affairs
2026_SAD_1035918_1
WBSDB/EE/CED-I/NIeT-02/2026-27
Open Tender
CIVIL WORKS
Percentage
90 days
Mayukh Bhawan 4th floor Bidhan Nagar Kolkata 91
Please refer Tender documents.
7 documents required · 7 mandatory
₹9,947
Yes
11 Sept 2026
4 Aug 2026
31 Aug 2026
4 Aug 2026
28 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
a) In ground floor including roof | 14.7 | cum | 447 | ₹6,570.9 |
| 1.1 | b) Extra rate for each addl. Floor over the rate of ground floor | 14.7 | cum | 150 | ₹2,205 |
| 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | 52.88 | Sq.M. | 19 | ₹1,004.72 |
| 3 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification] [Mode of measurement:The affected surface area of reinforcement shall beconsidered for payment] | 9.9 | Sq.M. | 782 | ₹7,741.8 |
| 4 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge | 9.89 | Sq.M. | 90 | ₹890.1 |
| 5 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). | 9.9 | Sq.M. | 309 | ₹3,059.1 |
| 6 | Supplying. preparing and placement of ready mix non shrink cementious microconcrete having no metalic aggregate or chlorides for repairing and \iackting of damaged R.C.C. members. The micro concrete should achieve a compressive strength not less than 10 MPa after 24 hours. 40 Mpa after 7 days ~ 3 and 50 Mpa aftre 28 days at 300C.It should have ~ unrestrained expansion in between 1 to 4%. flexural ~ strength shall not be less than 5MPa after 28 days. Micro concrete should have a co-efficient of thermal expansion similar to that of the host concrete. | 0.5 | Cum | 50,546 | ₹25,273 |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (a) 10 mm thick plaster | 52.88 | Sq.M. | 130.53 | ₹6,902.43 |
| 7.01 | Extra for each additional floor over the rate for ground floor items
1 to 3 of subhead A : (i) Internal plaster (a) Upto 4th floor | 52.88 | Sq.M. | 4 | ₹211.52 |
| 8 | Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to IS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work).15 micron colour anodising Structural glazing /Curtain Wall
i) Mulion & Transom (Weight @1.819 Kg per Meter) | 96.3 | Mtr | 463 | ₹44,586.9 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.06 MB
Tendernotice_2.pdf
PDF • 0.54 MB
BOQ_2544848.xls
BOQ • 0.37 MB
DEC02_0001.pdf
PDF • 0.74 MB
DEC01_0001.pdf
PDF • 0.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .