REPAIR MAINTENANCE OF STEEL GATES WICKET GATES ROLLING SHUTTERS GATE PILLARS GARAGES FLOORING AND CERTAIN MISC B AND R WORKS UNDER AGE I R AND D KOCHI

Amount

Dismantling of structrual steel work of any description including doors, gates but excluding framed truss. complete all as specified and directed.

S&F framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into apikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

M&L for over hauling of rolling shutter of area exc 5 Sqm but n exc 20 sqm each and overhaulling greasing oiling repairing worn out rebets etc including minor welding work as required and refixing in the same position in the smooth functioning of shutters complete all as specified and directed.

Taking down steel gates or collappsable gate of area exc. 3.00 sqm but not exc.15.00 sqm each and overhauling, greasing oiling, repairing worn-out nut/rebets etc. including minor welding work as required and refixing in the same position complete all as directed by Engineer -in- charge.

S&F of 1.00mnm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required®

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings in complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S& F rolled sections as in main and cross beams, coloumns , hip and jack rafters; purlins where connected to common rafters of angle , pipe sections FE 290 E 165 etc complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 290 Gde-E-165 complete all as specified and directed

M&L painting to new steel and iron surface exc 10 cm width or girth and applying two coats of synthetic enamal paint over 1 coat of primer including preparation of surfaces complete all as specified and directed.

M&L painting to old steel and iron surface exc 10 cm width or girth and applying two coats of synthetic enamal paint including preparation of surfaces complete all as specified and directed.

Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, hard and dense soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggt as in sub base foundation filling and mass concrete of etc . . Incldin post holess complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (20 mm gd aggregate) as in filling of post holes,bed block Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in floors and pavings of 75 thick all as specified and as directed

M&L Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick set joined and pointed in neat cement slurry in floors with white cement and pigment complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L pre cast concrete block masonary 1:3:6 type C1 (20mm graded aggregate) with solid block exceeding 10 cm in width and seting CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 on surfaces other than fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of cement base paint over primer on walls all as specified and direcrted.

M&L for preparing of old surfaces and applying two coats of cement base paint on walls all as specified and direcrted.

M&L 18 to 22 mm thick Grinite (of any type) work (table rubbed and polished) in steps,jambs,walls,pillers,cooking platforms and etc in cm(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of grinite complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

S & F in position alphabetical letters in Hindi or English and signs arrows etc made of stainless steel/gold colour shade sheet of grade SS-304 L of thickness 1.00mm and fixing to MS sheet cladding with neccessary fixing arrangements size of each letter upto 45cm in width & 45 cm in height and thickness of letter 25mm so as give a shape of 3D complete all as specified and directed.

ELAN ENGINEERS

ZOOM ENTERPRISES

T K BUILDERS