Improvement and Augmentation of water supply scheme Chak Medhu Sardalian (Civil works) under JJM

Amount

Civil Works: (Items Rate) Construction of Pump Room Building at T/Well site Chak Medu Sardalian E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil. (80%)

Ordinary rock (20%)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Boulders 30%

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)and curing complete

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cm wide

15mm Cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate

White washing new work (three or more coats) with lime to give an even shade

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fitting concealed internal Electrification of room including 4 Nos LED lights, Fan points 2 No., Fuse box 1 No., 2 no 15 Amp sockets with switch, 5 Amp 2 no. sockets with switch - of approved brand and 04 nos LED security lights 30 watts, Main switch with complete wiring, with MS bracket for pole mounting complete including service line up to a length of 10 meters.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 30 km. And 400 mtr by head load

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 20 km. and 400 mtr by head load

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 20 km. And 400 mtr by head load

Carriage of soling stone/ boulders from source to site of work for an av. Distance of 500 mtr by head load .

Carriage of Brick from klin to site of work by M.T 20 km and 400 mtr by head load

Carriage of Cement by Mechanical Transport from source to site of work for an av. Distance of 20 km. And 400 mtr by head load

Carriage of Steel by Mechanical Transport from source to site of work for an av. Distance of 20 km. And 400 mtr by head load

Construction of Compound wall around the civil structure at Chak Medu Sardalian (Items Rate) E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement 4 coarse sand) Parapit

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

15mm thick Cement plaster or rough side of single or half brick wall of mix : 1:4 ( 1 cement : 4 coarse sand) wall with plinth

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Providing and fixing of welded anfle iron gate ( size 4.50 mtr x 1.50 mtr) having angle 50x 50 x 6 mm and fix with 16 gauze sheet and 50 mm x 6 mm flat iron diagonal strip / ornamental grill etc. complete job

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 30 km. and 400 mtr by head load

Carriage of Bajri (below 40mm ) by Mechanical Transport from source to site of work for an av. Distance of 20 km. and 400 mtr by head load

Carriage of Bajri (above 40mm ) by Mechanical Transport from source to site of work for an av. Distance of 20 km. and 400 mtr by head load

Carriage of Brick from klin to site of work by M.T 20 km and 400 mtr by head load

Carriage of Cement by Mechanical Transport from source to site of work for an av. Distance of 20 km and 400 mtr by head load

Provision for installation fof sign board/ wall painting

Construction of 20000 Gallons Ground storage reservior at Chak Medhu Sardalian (Items Rate) Earth work in bulk excavation by Manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil

Ordinary rock (20%)

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 330/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works upto plinth level (Bed Slab+ Gola)

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 330/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works above plinth level upto floor level V (Walling, beams)

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc. and removal of form for: Arches, domes, vaults upto 6 mtrs span.

Extra for centering and shuttering in circular works for domes exceeding 6 mtr diameter

12 mm plaster of mix: 1:4(1 cement : 4coarse sand)

12 mm plaster finished with a floating coat of neart cement of mix: 1:3 (1 cement : 3 coarse sand)

Extra for plastering on circular work not exceeding 6m in radius: In one coat

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.( Manhole cover with locking system)

Providing and mixing water proofing material ofapproved make in cement concrete work @ 1 kg per 50 kg of cement

Providing and fixing AC plain, bends 80mm dia

Providing & Incorporating (during concreting) GP sheet strip water seal 1.25mm (nominal thick) at construction joints including jointing of ends so as to form a continous barrier, strip area (excluding laps) to be measured (width upto 20cm)

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. (medium) nominal bore for washout/ delivery main / over flow welded with M.S. Plate 1.25 mm thick 150 x150 mm size etc. complete excluding cost of pipe.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 30 km and 400 mtr head load

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 20 km and 400 mtr head load

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 20 km and 400 mtr head load

Carriage of Cement by Mechanical Transport from source to site of work for an av. Distance of 20 km and 400 mtr head load

Carriage of steel by Mechanical Transport from source to site of work for an av. Distance of 20 km and 400 mtr head load

Pipe Works: at Chak Medu Sardalian (Items Rate) Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils.

Laying and fitting ofG.I. pipes (all classes) complete

GI pipe 100mm dia (Light ) (trench size 0.75 x 0.75)

GI pipe 80mm dia (Medium ) (trench size 0.75 x 0.70)

GI pipe 80mm dia (Light) ( trench size 0.70 x 0.70)

GI pipe 65mm dia ( trench size 0.70 x 0.70 )

GI pipe 50mm dia ( trench size 0.60 x 0.60)

GI pipe 40mm dia ( trench size 0.60 x 0.50)

GI pipe 32mm dia ( trench size 0.50 x 0.40)

GI pipe 25mm dia ( trench size 0.40 x 0.30)

GI pipe 15mm dia ( trench size 0.30 x 0.20)

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete

Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal bore

Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm nominal bore

Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm nominal bore

Providing and fixing of gun metal gate non return valve of approved quality (screwed end) 80 mm nominal bore

Dismantling manually/ mechanically including stacking of serviceable material and disposal od unserviceable material within 50 mtr lead as per direction of Engineer-in - charge Bitumenous Road

Dismantling of cement concrete manually/ mechanical means including disposing off dismantled material up to a lead of 50 m. ( 1:3:6 or richer mix)

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required lane, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand , filling the joints with fine sand etc. alll complete as per the direction of Engineer-in- charge.

Taking out existing cement concrete interlocking paver blocks from footpath/ central verge including removal of rubbish extra , disposal of unservecable material to the dumping ground.

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia.

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia.

Providing and fixing 100 mm dia C.I. sluice valves /Chak Valves as per specification (IS:14846) for control purpose in proposed pipe of following dia including jointing material (bolts, nuts, gaskets, washers, rubber insertious etc.) complete including testing

Providing and fixing 100 mm dia C.I. sluice valves /Chak Valves as per specification (IS:14846) for control purpose in proposed pipe of following dia including jointing material (bolts, nuts, gaskets, washers, rubber insertious etc.) complete including testing

Providing and fixing 65 mm dia C.I. sluice valves /Chak Valves as per specification (IS:14846) for control purpose in proposed pipe of following dia including jointing material (bolts, nuts, gaskets, washers, rubber insertious etc.) complete including testing

Providing & Fixing brass bib cock of approved quality 15 mm nominal bore

Providing & fixing brass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore

Providing and laying non pressure NP-2 class (light duty) RCC pipe with collars, joints with stif mixure of cement mortar in position 1:2 ( 1 cement :2 sand) including tsting of joints etc. complete at crossing / spots where required ( dia 300 mm)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Carriage of pipe (GI) fromprocurement store to stacking place at an av . Distance 40 km mechanical transport and 400 mtr by head load

Restoration of lanes and drains damaged during execution of pipe works under WSS Chak Medhu Sardalian : Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kind of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Carriage of Sand from source to site of work for an av. Distance of 10 km by Mechanical Transport and 400 mtr by head load

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km and 400 mtr by head load

Carriage of cement by Mechanical Transport 10 km and 400 mtr by head load incl. cost of loading, unloading and stacking

RIAZ AHMED