Construction of C Type Qtr at R.W. Division, Bonai for the year 2025-26-Building

Earth work in excavation in foundation in hard with initial leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete

Filling foundation and plinth with sand well watered & rammed with cost, conveyance, royality, taxes etc. complete.

Cement concrete (1:3:6) with 4cm size hard granite metal including cost, conveyance,royality,taxes,watering and curing etc. complete.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying A)column base

B)Columns & Beams

C) Plinth band

D) Lintel

E) Chajja

F) Roof slab

G) Shelves

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Brick work withFly Ash bricks having crusing strength between 75kg/cm2 in cement motar (1:6) with cost,coveyance,royality watering&curing etc. complete. A) In foundation

B) In Superstructure

16mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc.

12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc.

Supplaying, fitting & fixing vertrifed tiles of size 600mmx600mmx10mm of in floors, treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyanceof all materials etc. complete.

Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.( Ceramic Tiles )

Finishing walls with weather coat paint of approved shade on new work two coat to give an even shade inculding cost of paint.

Finishing wall surface of walls with Acrylic wall puty ( Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with cost of all matyerials taxes, labour T & P etc complete.

Finishing walls with wall cement primer of water bound of approved shade on new work two coat to give an even shade inculding cost of primer.

Wall painting two coat with plastic emulsion paint with cost of plastic emulsion paint and labour etc.

Providing, fitting & fixing of 30mm Flush door with single shutter made of ( Mayur Timtickch India Ltd. ) with all fitting like door closer, door stopper, alluminium door hinges, friction stay, alluminium screews, handle with lock (Brass), with all labours & cost of all materials etc. complite.

Supplying ,fitting ,fixing fully glazed aluminum framed Sliding window using 15 micron anodized aluminum section 2082 as out section,9139 as mullion section,4124 as a shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading, friction stay and handle etc with 5mm black glass.

Supplaying, cost & convaynce of M.S. Grill Door, Window grills & collapsible Gate

Painting two coat with any approved paint over a coat of primer to Doors & Windows with cost of primer,paint & labour.

Supplying ,fitting ,fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32x32x2mm @0.90 mtr. C/C and stainless square pipe bracing of size 32x32x2mm in 3 rows in stair case as per approved design and specification, buffing , polishing etc with cost, conveyance, taxes of alll materials, labour, T&P etc required for the coplete in all respect.

Cement concrete ( 1 : 2: 4) using 12 mm size HG CB chips incuding laying lowering concrete, wartering and curring & cost carriage royalty and taxes of all materials etc.

Recessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2)

-do- (Gr.B) (1.1.2-1.24.2)

-do- (Gr.C) (1.1.3-1.24.2)

S/F of M.S. Box for 2 Module 18 swg

S/F of M.S. Box for 4 Module 18 swg

S/F of M.S. Box for 6 Module 18 swg

S/F of M.S. Box for 8 Module 18 swg

S/F of M.S. Box for 12 Module 18 swg

S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Invertor Connection.

S/F of computer board consisting of 3 nos. of 5 amp modular plug and modular switch and 1no. Of 6 amp Mini MCB, complete with wiring on 12 modular type M.S.box with modular cover.

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

-do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Anchor/Equivalent)

S/F of 15A Socket on 2 module for AC

S/F of 2 Modular box with 5A modular Socket outlet of ISI marked on Separate board for Wall fan

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of MCB 8 Way Double Door (2.3.6)

S/F of MCB 4 Way Double Door (2.3.5)

S/F of MCB 2 Way Single Door (2.3.1(b))

S/F of 32 Amp rating "C" Series DP MCB (Make: L&T/Havells/C&S/Equivalent)

S/F of 32A DP Switch with indicator(Make-Havells/Equivalent)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of Fan hook S, Type on ceiling.

S/F of step type modular fan regulator

S/F of 12 Watt LED Bulb(Make Havells/Polycab or Equivalent)

Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient)

S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous)

S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

S/F of 18W Recess Mount(Round/Square) Type Ceiling light (Havels/crompton/Polycab or Equivalent)

S/F OF 15W GATE LIGHT FITTING(Make Havells / Equivalent)

S/F OF 2000 VA Invertor with 2 no 180Ah Battery with trolly arrangement(Luminous/Microtek/Excide/V Guard)

S/F of 1.5T 5Star split Inverter type AC Machine, Make-Carrier /Blue Star /Hitachi

S/F of 4 KVA Voltage Stabilizer(110-300V) Upto 1.5 Ton AC, Make-Microtech/V-Guard

S/F of 400mm A.C. wall fan with all accessories (Make:Usha-Max air ultra/Polycab-Aery HS/Crompton-wmhiflo wave /Havels-Accelero HS/Anchor-Altrix HS/Orient- Wall 43/ Great white- WYNO Pro HS)

Supplying all materials labour T&P and filling F&P with river sand well watered and rammed including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per the direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following OD conforming to ISI No. 13592/ 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (a)110mm dia pipe

(b)110mm dia Door Tee

(c)110mm dia P Trap

(d)110mm dia Door Bend

(e)110mm dia Offset

(f)110mm dia Plain bend

(g)110mm dia cowl

(h)125mm dia CP Grating

Supplying all materials labour T&P and fixing wash down water closet (Anglo Indian water closet)with integral S or P trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cm(1:1)etc. all complete as per specification and direction of E.I.C. (a)E.W.C. with S Trap with sheet cover(make- parryware)

Supplying all materials labour T&P and fixing water closet,squatting pan(Indian type WC. pan/Orissa pattern squatting pan) duly embedded in cc(1:5:10)using 4cm hg. metal all complete as per the direction of E.I.C. (a)580mm Orissa pan(make- parryware)

Supplying all materials,labour,T&P and fixing kitchen sink with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C. (a)600mmx450mmx200mm Steel sink with 40mm dia CP west,west pipe and brackets.(Mousumi make)

Supplying all materials,labour,T&P and fixing wash basing with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C. (a)550mmx400mm W.H.B. with 32mm dia CP west, west pipe,brackets and connection pipe .(make- parryware)

(b)Pedestrial for W.H.B. (make- parryware)

Supplying all materials,labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plugs with CP screws and washers complete as per PH specification and direction of E.I.C. (a)600mmx450mm B.E Mirror

Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. (a)(125x450)mm size glass-shelf with CP Guard rail(Jaquar Make)

Supplying all materials,labour T&P and fixing standard size CP towel rail complete with CP Brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. (a)25mmx600mm long CP towel rail(Jaquar Make)

(b)CP Towel Ring(Jaquar Make)

Supplying all materials,labour T&P and fixing standard size CP soap holder complete with CP Brass brackets fixed to wooden plug with CP screws as per P.H. specification and direction of E.I.C. (a)CP Soap holder(Jaquar Make)

Supplying all materials labour T&P and cutting holes through brick/stone masonary walls for taking HCI/PVC and fittings including making good the damages etc. all complete as per PH specification and direction of E.I.C. (a)375mm thick wall

(c)Roof cutting

Supplying all materials labour T&P and fixing Digital tiles in floors,threads, landing on 25mm thick bed of cm(1:1)jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C.

Supplying all materials labour T&P and fixing porcelain glazed tiles in dados skirting and risers of steps on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C.

Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member,9201 as top,9200 as bottom and middle member with frame section as 9221with tapered clip no 4660 & frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the E.I.C.

Supplying all materials labour T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1stclass KB brick work in cm(1:6)moulding & shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside, cement flush pointin(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC man hole cover,e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C. (a)Inside size 760mmx760mmx460mm

Supplying all labour T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonary brick work gravel packing in the rear of well steining RCC cover slab in cc(1:1.5:3)using 12mm size hg chips fitted handles including e.w. in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all meterails to work site, payment of royality,taxes etc. all complete as per approved drawing specification and direction of E.I.C. (a)1.20m dia x 2.00m deep

Supplying all materials labour T&P and laying PVC pipe sewer line,Grade-A of the following internal dia in trenches(to level or slope)and jointing with gasket & stiff mixture or cm(1:1),cc(1:3:6)with 40mm size h.g metal on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size hg metal including curing,conveyance to workside,payment of royality,taxes etc and testing all complete as per approved drawing,specification and direction of E.I.C. (a)160mm dia PVC pipe with allround hunch top

Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C. (a) Initial lift upto 1.50m

(b) From 1.50m to 3.00m depth

Supplying all materials labour T&P and providing cc(1:3:6)using 4cm h.g metal including watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing cc(1:1.5:3)using 12mm hg chips including watering,curing,conveyance of all material to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing brick work with flyash Bricks in cm(1:4)F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C.

Supplying all materials labour T&P and providing rigid & smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting,bending,binding & tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour T&P and providing 12mm thicks CP(1:3)with punning on brick/stone work including watering,curing conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in cc(1:3:6)all complete as per PH. specification and direction E.I.C.

Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1 :1.5:3)using 12mm b.h.g. chips and fitted to septic tank as per PH. specification and direction E.I.C.

Supplying all materials,labour,T&P and providing fitting & fixing PVC Tee in wall including fitting the necessary with cc(1:1.5:3)with 12mm size hg chips all complete including watering,curing,conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. (a)160mmx160mmx160mm PVC Tee

Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing 500x500x100mm thick RCC precast MH cover in cc(1:1.5:3)using 12mm hg chips placing the cover on the MH/ST & finishing smooth all complete as per specification and direction of E.I.C.

Filling in F&P with excavated materials including watering and ramming as per direction of E.I.C.

Supplying all materials,labour,T&P and construction of masonry staging with providing 1stclass KB brickwork in cm(1:6)of 0.46m height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30mx2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering,bending & binding of rod etc watering, curring,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. (a)Stagging for 1000Ltr. Storage Tank (1st. Floor)

Supplying all materials,labour,T&P and Fitting & Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts including hoisting upto a height of 5mtr above G.L and placing the tank in required position including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C (a)1000Ltr. Capacity Water Storage Tank (1st. Floor)

Supplying all materials,labour,T&P and fitting & fixing 10ltr capacity LL flushing cystern with a pair of ms clamps complete with fittings such as syphonic arrangements 15mm nominal size PVC ball valve with polythene float,PVC handle,union and couplings for connection with inlet,outlet and overflow pipes, 32mm dia CP flush bend,15mm dia,PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. (a)10Lit. PVC Cistern(Parryware make)

Supplying all materials,labour,T&P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall,ceiling and floor testing all complete as per specification and direction of E.I.C. (a)25mm dia C-PVC pipe(External)

(b)20mm dia C-PVC pipe(Internal)

Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking GI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.

Supplying all materials,labour,T&P cutting holes in RCC floors,roofs etc up to 19cm thick for passing GI/PVC pipes fittings and reparing the holes after insertion of pipe etc. with cc(1:1.5:3)including finishing so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of E.I.C.

Supplying all materials,labour,T&P and fitting & brass/CP fittings of the following nominal bore with supply of all jointing materials etc.complete as per P.H. specification and direction of E.I.C. (a)15mm dia CP Bib cock(make-Jaquar)

(c)15mm dia CP(L.B)Bibcock(make-Jaquar)

(b)15mm dia CP Two way Bib cock(make-Jaquar)

(d)15mm dia CP wall mixture[2-in-1](make-Jaquar)

(e)15mm dia CP Pillar cock long neck(make-Jaquar)

(e)15mm dia CP Angle Stopcock(make-Jaquar)

(f)15mm dia CP Concealed stopcock(make-Jaquar)

(g)15mm dia CP Revolving Shower with shower Arm(make-parry ware)

(h)15mm dia Health Faucet & 1.0m long Flexible pipe(make-Jaquar)

(j)25mm dia F.W.V.

Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/ Hour & a head-55/70mtr.of reputed make(CRI/KSB/Texmoor equivelent Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials labour T&P and fitting & fixing of 2.5mm2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials labour T& P and fitting&fixing plastic rope with MS well cover,MS Clamp,stainless steel short piece,Bend & socket,union including all cost conveyance & taxes etc. all completes as per PH. Specification direction of E.I.C.

Supplying all materials labour T&P and fitting&fixing of HDPE pipes & pipe fittings with making connection to pump set including all cost conveyance & taxes etc.all completes as per P.H. Specification direction of E.I.C.

Labour for drilling of perfactly vertical bore holes as specified dia. For a specified depth below GL through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi) as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard & boulder formation (PCV/ GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No) (a)Drilling of 125mm. dia. Bore-

(b)Drilling 100mm dia. Bore-

Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00m depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/ G.I)supplied by the contractor (including cost of pipe) (a)Lowring of 125mm dia pipes-

(b)Cost of 125mm dia PVC casing pipes-.

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C

Please Enable Macros to View BoQ information