Loading
Loading…
Loading…
Tender Value
₹2.5 Cr
EMD Value
₹2.8 L
Closing Date
23 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-Any Signaling Work of 1.1.1 EI/PI/RRI/IBH/ABH/LC Gate Interlocking Track circuit works /Axle counter works etc.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
S&T work in connection with various track related works in KOTA DIVISION & Provision of Guard Repeater Signal indicator for enhancing Visibility at selected five locations on Kota Division.
KOTA-SNT-SIG-2025-14R4~WCR
KOTA-SNT-SIG-2025-14R4
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹2.8 L
23 Jan 2026
24 Dec 2025
9 Jan 2026
82 items across 2 schedules · ₹2,50,27,253.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Professional AC/DC clamp meter for Low current. High resolution of 1mA on AC/DC ranges True RMS measurement.Model - 3540 Koico or Rishabh ALCT 60A or better low current measuring capabilities.Meter shall be first inspected by divisional/ Site incharge/ Consignee. | Numbers | 23.00 | 28,730.99 | 6,60,812.77 |
| 2 | Wheel sensor RSR 180 with 5 mtr. cable of Frauscher MSDAC (fAdc) as per RDSO Specification No. RDSO/SPN/176/2013 (Version 3). Make/Brand: Frauscher sensor technology India. Firm 2109s Make/Brand : Frauscher. | Numbers | 3.00 | 1,71,851.66 | 5,15,554.98 |
| 3 | SUPPLY OF RAIL CLAW SK-140 FOR RAIL FOOT MOUNTING, VERTICALLY ADJUSTABLE EXCL. CLAMPING BOLT PAIR FOR 60 KG RAIL FOR FRAUSCHER MAKE MSDAC. | Numbers | 1.00 | 42,102.4 | 42,102.4 |
| 4 | Supply of RESET BOX CARD Compatible with existing FRAUSCHER make MSDAC as per RDSO Specification No. RDSO/SPN/176/2013 (Version.3) or latest. | Numbers | 1.00 | 26,550 | 26,550 |
| 5 | SUPPLY OF CLAMPING BOLTS FOR RAIL CLAW SK-140 FOR 60 KG RAIL FRAUSCHER MAKE FOR MSDAC . | Numbers | 2.00 | 5,192 | 10,384 |
| 6 | SUPPLY OF PROTECTION TUBE FLAME RESISTANT 4.8M FOR WHEEL SENSOR CABLE PROTECTION FOR FRAUSCHER MAKE MSDAC . | Numbers | 1.00 | 5,900 | 5,900 |
| 7 | Input/Output board IO-EXB, make-Frauscher MSDAC (FAdC) as per RDSO Specification No. RDSO/SPN/176/2013 (Version.3). Accepted offer: Make/Brand: M/s. Frauscher Sensor Technology. Make / Brand:OEM | Numbers | 1.00 | 1,17,227.81 | 1,17,227.81 |
| 8 | Supply of OVER VOLTAGE PROTECTION (BSI004) COMPATIBLE WITH EXISITING FRAUSCHER MAKE MSDAC as per RDSO Specification No. RDSO/SPN/176/2013 (Version.3) OR LATEST. | Numbers | 1.00 | 15,915.84 | 15,915.84 |
| 9 | Double Rail contact assembly with track side EJB for MSDAC. Each set shall consist of track side Electronic unit, Double rail contact with 10 Mtrs cable and mounting accessories. This item shall be procured from RDSO approved firm and inspected by RDSO SIEMENS/FRAUSCHER/ELDYNE. Make/ Brand - FRAUSCHER | Numbers | 1.00 | 2,60,780 | 2,60,780 |
| 10 | Supply and Transportation of Evaluation board AEB101 GS07 compatible to work with Frauscher MAKE MSD AC as per RDSO Specification No. RDSO/SPN/176/2013 (Version.3) or latest. Firm's offer: Make/Brand: Frauscher Sensor Technology India Pvt Ltd. | Numbers | 1.00 | 2,38,360 | 2,38,360 |
| 11 | Supply of Digital Cards for SSDAC. As per RDSO Specn. No. RDSO/SPN /177/ 2012 (Ver. 3) or latest. | Numbers | 18.00 | 1,25,283.18 | 22,55,097.24 |
| 12 | Supply of Analog Cards for SSDAC.As per RDSO Specn. No. RDSO/SPN/177/ 2012 (Ver. 3) or latest. | Numbers | 18.00 | 85,619.37 | 15,41,148.66 |
| 13 | Supply of Professional AC/DC clamp meter 3 ¾ digit , true RMS measurement, For Measurement of DC/AC currents up to 60A, Voltage up to 600V, resistance up to 60 mega Ohm with set of leads & carrying case. Model - SMC 222 or better low current measuring capabilities | Numbers | 2.00 | 13,946.28 | 27,892.56 |
| 14 | Supply of SK 30H Double rail contact with 8 Mtr. Cable for multi section type digital axle counter (MSDAC) as per RDSO Spec No.RDSO/SPN/176/2013 or Latest make M/s Eldyne Electro Systems. | Numbers | 13.00 | 2,39,417.05 | 31,12,421.65 |
| 15 | Supply of PD1 (21KHz) card for GG Tronic make HASSDAC as per RDSO specification No.RDSO/SPN/177/2012 withversion 3.0 or latest with RDSO inspection Make/Brand:- GG Tronics. Make / Brand: G.G. TRONICS INDIA PRIVATE LIMITED. | Numbers | 9.00 | 39,530 | 3,55,770 |
| 16 | PD2 25 KHZ Card suitable for GG Tronic make SSDAC/HASSDAC as per RDSO Spec. no. RDSO/SPN/177/2012 Ver 3.0 or latest make/brand:-GG Tronics Make / Brand: G.G. TRONICS INDIA PRIVATE LIMITED | Numbers | 8.00 | 39,530 | 3,16,240 |
| 17 | Supply of HSS Twist Drill Parallel shank 7.2 mm make - IT/ Adison/JK. | Numbers | 305.00 | 105.37 | 32,137.85 |
| 18 | Supply of 8 SWG GI Wire (4mm dia) suitable for track circuit rail bonding. | Kg | 1366.00 | 114.22 | 1,56,024.52 |
| 19 | Supply of hand operated track drill machine for drilling bond wire holes of size 9/32 inch railway track suitable for 52 kg or 60 kg. | Numbers | 33.00 | 7,463.5 | 2,46,295.5 |
| 20 | High frequency TX Coil and RX Coil (each set consists of web mounting type TX Coils - 01 No., RX Coils - 01 No 10 mtr) - One Set for Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. | Set | 1.00 | 26,000 | 26,000 |
| 21 | "High frequency TX Coil and RX Coil (each set consists of web mounting type TX Coils - 01 No., RX Coils - 01 No 15 mtr) - One Set for Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest." | Set | 1.00 | 30,000 | 30,000 |
| 22 | Supply of Signal Number plate pressure sensitive Retroreflective type high intensity grade white with imprinted'Number/Alphabet/Arrow' inblack/White of size as per SEM Drg.19- D10 (Sheet 6 to 7) with film thickness 0.3mm on MS sheet with Clamp for Main/ShuntSignal made of MS Flat of size30mm x 3mm with nut & bolt asper SEM Drg.No. 19-D10 (Sheet9-10). | Numbers | 2571.00 | 281.16 | 7,22,862.36 |
| 23 | Supply of 21 KHZ/25 KHZ Transmitter coil assembly for HASSDAC Systems RDSO Specn. No. RDSO/SPN/177/2012 (Ver.3) Make-G.G.Tronics. Make/Brand:- GG Tronics , | Numbers | 28.00 | 42,555.52 | 11,91,554.56 |
| 24 | Supply of 21 KHZ/25 KHZ Receiver coil assembly for HASSDAC Systems RDSO Specn. No. RDSO/SPN/177/2012 (Ver.3) Make-G.G.Tronics. Make/Brand:- GG Tronics , | Numbers | 29.00 | 42,555.52 | 12,34,110.08 |
| 25 | "Supply of Hand Held 100 KHz True RMS Digital Multimeter of specification like DC and AC Voltage Range (660mV- 1000V) Voltage resolution range DC/AC (100 microVolt-100 miliVolts). DC and AC Current Range- (66mA-10A), Frequency ranges (upto 10MHz with resolution 0.01HZ) . Model Rishabh 616 or better specifications." | Numbers | 11.00 | 9,907 | 1,08,977 |
| 26 | Supply of Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS- 931A and RDSO Specn.No.IRS:S34, S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"" | Numbers | 20.00 | 3,913.67 | 78,273.4 |
| 27 | Supply of Relay Ac Immune, Plug intype, Style QBCA-1, DC Biased PointContactor, 24V DC, 2F DC, 2HF-4BContacts Front Contacts Heavy Dutyand Back Contacts Metal to CarbonComplete with Plug Board, RetainingClips and Connectors, Conforming toBRS 943, IRS S 34 and IRS S 23. | Numbers | 20.00 | 6,424.06 | 1,28,481.2 |
| 28 | Supply of Relay plug in type styleQL1 magnetically latched neutral linerelay, 24 V DC, Metal to CarbonContacts complete with plug board,retaining clip & Connectorsconforming to BRS: 935A, IRS: S@45"38@ IRS: S-23 or latest 11F/4B Front &Back contacts for interlocking codefor this unit shall be ABDEG. | Numbers | 20.00 | 7,050.43 | 1,41,008.6 |
| 29 | "Supply of Output card compatible with existing UFSBI system as per specification IRS:S-105/2012 Ver 0.0 or latest compatible with existing system." | Numbers | 6.00 | 28,084 | 1,68,504 |
| 30 | "Supply of Input card compatable with existing UFSBI system as per specification IRS:S-105/2012 Ver 0.0 or latest compatible with existing system." | Numbers | 5.00 | 12,508 | 62,540 |
| 31 | "Supply of CPU card compatible with existing UFSBI system as per specification IRS:S-105/2012 Ver 0.0 or latest compatible with existing system." | Numbers | 4.00 | 31,270 | 1,25,080 |
| 32 | "Supply of Control and communication card compatible with existing UFSBI system as per specification IRS:S105/2012 Ver 0.0 or latest compatible with existing system." | Numbers | 4.00 | 25,075 | 1,00,300 |
| 33 | Supply of SS Fit & Forget Bond wire of Length 1 Meter. | Numbers | 50.00 | 497 | 24,850 |
| 34 | Supply of SS Fit & Forget Bond wire of Length 1.5 Meter. | Numbers | 55.00 | 516 | 28,380 |
| 35 | Supply of SS Fit & Forget Bond wire of Length 2 Meter. | Numbers | 107.00 | 538 | 57,566 |
| 36 | Supply of SS Fit & Forget Bond wire of Length 3 Meter. | Numbers | 220.00 | 580 | 1,27,600 |
| 37 | Supply of SS Fit & Forget Bond wire of Length 4 Meter. | Numbers | 230.00 | 623 | 1,43,290 |
| 38 | Supply of SS Fit & Forget Bond wire of Length 5 Meter. | Numbers | 50.00 | 666 | 33,300 |
| 39 | Supply of SS Fit & Forget Bond wire of Length 6 Meter. | Numbers | 110.00 | 709 | 77,990 |
| 40 | Supply of SS Fit & Forget Bond wire of Length 7 Meter. | Numbers | 140.00 | 752 | 1,05,280 |
| 41 | Supply of SS Fit & Forget Bond wire of Length 8 Meter. | Numbers | 50.00 | 795 | 39,750 |
| 42 | Supply of SS Fit & Forget Bond wire of Length 9 Meter. | Numbers | 50.00 | 838 | 41,900 |
| 43 | Supply of SS Fit & Forget Bond wire of Length 10 Meter. | Numbers | 50.00 | 880 | 44,000 |
| 44 | Supply of tool box with general tools as per annx. | Lot | 3.00 | 63,717.96 | 1,91,153.88 |
| 45 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 16.00 | 1,313.36 | 21,013.76 |
| 46 | Supply of Pad Locks with common key make Godrej / Navtal only. | Numbers | 32.00 | 353.02 | 11,296.64 |
| 47 | "Supply of Relay Plug-in type, Style 'AC- LED' All aspects, AC lamp proving relay unit with in-built current transformer type, slow release neutral line relay, 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp rated at 15W confirming to RDSO spec. STS/E/Reelys/AC lit LED signal/ 09-2002, BRS:941A, IRS:S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be ABDHK. Note: Base plate inspected by consignee with OEM /Manufacturer testing & guarantee certificate." | Numbers | 20.00 | 8,601.78 | 1,72,035.6 |
| 48 | Supply of 4 conductor disconnect terminal block with test & measurement facility, with screw less, spring cage clamp connections suitable for 0.08 to 2.5 Sq.mm conductor with current capacity of 16 Amps as per RDSO Spcn. No. RDSO/SPN/189/2004 Ver. 3.0 or latest. | Numbers | 1140.00 | 66.79 | 76,140.6 |
| 49 | Supply of End plate compatible to above screwless terminals. The end plates shall be of different colour than that of disconnect terminal blocks. | Numbers | 114.00 | 12.87 | 1,467.18 |
| 50 | Supply of Din rail of dimension 35mm x 7.5mm, 1 mm thickness, 1Mtr length, slotted compatible to above terminals. | Numbers | 114.00 | 115.99 | 13,222.86 |
| 51 | Supply of End Stop 10mm for above Din 35 Rail. | Numbers | 20.00 | 11.37 | 227.4 |
| 52 | Supply and erection of 15 feet GI pipe of 4'' dia of medium quality ISI No 1230 (part 1) 1990. Having iron base plate 10mm thick 30cm x 30 cm weild at the bottom of the pipe with 4 supports of iron bars of size 10mm dia. The 3 feet pipe shall be buried in the ground and 12 feet shall be above the ground. The work includes digging of pit on platform, laying of cable, erection of pole, filling the pit with 1:3:4 cement, concrete and sand. Final plastering should be done on the surface. The iron bracket on the top of the pole shall be provided for the fixing of calling On Unit. (Necessary fixing and other materials required for fixing should be borne by the contractor) | Numbers | 16.00 | 3,615.08 | 57,841.28 |
| 53 | Supply of calling ON Unit suitable for LED signal as per RDSO Drg No. 24351(Adv.) Alt- 1 complete along with its base & clamping arrangement. | Numbers | 20.00 | 3,362.24 | 67,244.8 |
| 54 | Supply of Off-Set bracket 5-1/2 '' for Signals & Routes as per Specification No. IRS: S- 10/78 and Drg no. SA-23080(Adv) Alt-1 or with latest amendment. | Numbers | 16.00 | 1,317.07 | 21,073.12 |
| Schedule total | ₹1,54,10,930.1 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .