EC COM WEOL Fire Protection 2025 26 80

Amount

SH I : FIRE FIGHTING SYSTEM

(A)Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :

(B) Horizontal type,centrifugal,end suction type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with anti vibration pads.

2280 lpm at 56 m Head

(A)Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)

(B) Horizontal type, end suction type, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520.

(C) Suitable HP, 2100 RPM water cooled with radiator,diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.

(D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with anti vibration pads.

2280 lpm at 56 m Head

(A)Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)

(B)Vertical type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.

(C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation conforming to IS : 325.

(D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with anti vibration pads.

180 lpm at 56 m Head

Terrace Pump (Down Comer Pump)

Pump Capacity - 900 LPM.

Pump Head - 35Mtr.

Fabrication,supply,Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type,fabricated out of 2mm thick CRCA sheet,compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals,numbering etc.complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

Necessary modification in existing panel incuding extension of busbar for suitable connection with 250 A , 4 pole MCCB including all necessary acessories as reqired for providing power supplt to Fire MCC panel including supply & laying of 4core 150sqmm aluminium XLPE insulated,pvc sheathed 1.1 kv grade armoured cable as required

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding, fittings like elbows, tees, flanges,tapers,nuts bolts, gaskets etc.and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

25 mm. dia

50 mm. dia

80 mm. dla

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

150 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked complete with nuts, bolts, washers,gaskets conforming to IS 13095 of following sizes as required :

50 mm dia.

80 mm dia.

100 mm dia

150 mm dia

200 mm dia

Supplying, fixing, testing and commissioning of Leader Forged Brass Gate valve of STP 2.2 MPA rating with non rising stem and screwed in bonnet complete with accessories conforming to IS 13114 of following sizes as required :

25 mm. dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts,nuts, washers etc.as required :

80 mm dia.

150 mm dia

Supplying, fixing, testing and commissioning of NON - RETURN VALVE with dual plate of C I body DI disc of flanged end & PN 16 pressure rating as specified.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Supply,Installation,Testing & Commissioning of C.I. Foot Valves Flanged ends swing type operation with rubber seat as per IS:4038 with stainless steel flange

150 mm dia.

80 mm dia.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet,1200 mm in height with air release valve on top and flanged connection to riser,drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supply & fixing of 150 mm dia pressure gauge of range 0 -10 Kg / sqcm conforming to IS - 3624 having bourdon tube of stain steel 310 in cast aluminium, stove enamelled, black, weather proof case with outer, screwed aluminium bezel and complete in all respects.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required.

4 way - 150 mm dia M.S. Pipe

Supplying & fixing of hose cabinet (750 mm x 600 mm x 250 mm) made of 2 mm thick MS sheet and 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate 2 nos 15 mtr long hose pipe,1 no. branch pipe,mounted on wall or raised brick plateform (previously built) and duly painted with post office red externally and white internally,with synthetic enamel paint on primer coat complete in all repect as reqd.The words "Hose cabinet" to be painted on the box.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585, 20 mm nominal internal dia gun metal globe valve & nozzle Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S.Pipe and socket.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/ Stainless Steel cap and chain as required :

Single headed Stainless steel

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Stainless Steel (Grade 304)

Supplying & installing of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convinient section, joint with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and Laying of XLPE insulated, PVC sheathed 1.1 KV grade Armoured Cable of following sizes on surface/in existing cable tray suitably clamped as required.

3C X 50 Sq mm (Al)

3C X 10 Sq mm (Cu)

12C X 1.5 Sqmm (Cu)

Providing & fixing 25 mm X 5 mm G.I. Strip on surface or in recess for connection etc. as required.

SAFETY SIGNAGE:Providing and fixing of photo luminiscent/visual markers signage made out of photo luminiscent, produced luminization with suitable colours combination (Glow in dark) with high intensity luminious properties covered with U/V statilized coating having following features complete as required. (a)Thickness of aluminium/ACP sheet 2.00 mm ±10% (b)Service temperature - 40 C to 120 C (c)Suitable for indoor surface, glow visibility for more than 8 hrs in total darkness. One sided signage written in English and also in regional Language,if required, for the below dimension Fire Safety Signages.

Signage printed with the above stated specification for (i) "NO SMOKING" with board size 4" x 12", (ii) Floor indentification signage with board size 4"x12", (iii) Exit signage board size 4"x12", (iv) signages for " EVACUATION MAP OF EACH FLOOR" with board size of 18"x24" and (v)the signages of " FIRE ORDER" with the board size of 24"x36"

S.H-II-FIRE AUTOMATIC FIRE ALARM SYSTEM

Two Loop Panel.

Supplying,installation,testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. (For True ceiling & Below False Ceiling)

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable fire contro modulel complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

PUBLIC ADDRESS & TALK BACK SYSTEM

Supplying,installation,testing & commissioning of 6 zone,voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of audio amplifier 500 Watt, 25/50V rms operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying,installation,testing & commissioning of fire fighter telephone Console 24 Zone complete as required.

Supplying,installation,testing & commissioning of 1.5/3/6W ceiling speaker complete as required

FIRE EXTINGUISHERS

Supply,Installation,Testing & Commissioning of Carbon-di-oxide type fire extinguishers with capacity of 4.5 Kg.consisting of welded M.S.cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming to IS:15683, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges.

Supply,Installation,Testing & Commissioning of Dry chemical powder type fire extinguishers of capacity of 6 Kg consisting of welded M.S cylindrical body, internal discharge tube, discharge nozzle,suspension bracket, conforming to IS:15683, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges.

Supply,Installation,Testing & Commissioning of "ABC Powder Automatic (Nitrogen) Type Fire Extinguishers" of capacity 5 Kg shall confirm IS:15683 & IS:14609 with initial fill & all mounting accessories etc.complete.

Supply,Installation,Testing & Commissioning of Foam type fire extinguishers of capacity 9 Ltr. consisting of welded M.S. cylindrical body,discharge nozzle, suspension bracket, conforming to IS:15683 finished externally with red enamel paint and fixed to wall brackets complete with internal charges.

Supply,Installation,Testing & Commissioning of "Fire Bucket" shall confirm IS:2546 & made of 24 Guage galvanised steel sheet of round bottom shape & having 9Ltrs capacity.

FIREGUARD SOLUTIONS (BID ID -6851011)

COSMIC RAY (BID ID -6868635)

Flash Point Controls (BID ID -6875276)