Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC L1 | |
| 2 | L2₹39.7 L+₹2.3 L (6.02%)Rejected-AOC TCP BAZAR JOSHIMATH DIST CHAMOLI UK PIN 246443 | JOSHIMATH | CHAMOLI | UK | 246443 | L2 | Rejected-AOC Not L1 | |
| 3 | L3₹40.0 L+₹2.5 L (6.73%)Rejected-AOC TCP BAZAR JOSHIMATH DISTT CHAMOLI UTTRAKHAND PIN 246443 | JOSHIMATH | CHAMOLI | UTTRAKHAND | 246443 | L3 | Rejected-AOC Not L1 |
Tender Value
₹43.4 L
EMD Value
₹86,800
Closing Date
10 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 871 EWS
GE 871 EWS C/o 56 APO
PROVISION OF COVERED ACCOMODATION FOR ANIMALS MULES GS PONIES OF GARHWAL SCOUTS AT JOSHIMATH AND PROVISION OF BATHROOMS AND TOILET NEAR BN QUATER GUARD AT AULI UNDER GE 871 EWS JOSHIMATH
2022_MES_537648_1
8697/E8
Open Tender
Civil Works
Item Rate
180 days
Joshimath Auli
as per NIT
8 documents required · 8 mandatory
₹500
GE 871 EWS
₹86,800
Yes
23 Sept 2022
13 Jul 2022
17 Aug 2022
13 Jul 2022
10 Aug 2022
27 Jul 2022
60 days
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ disintegrated rock, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L Rolled mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.
M&L Rolled mild Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410W (Gde E 250) all as specified and directed.
M&L Rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in Base plate/Gusset plate, cleats for securing purlins/rafters and similar articles conforming to Fe 290 (Gde E 165) all as specified and directed.
M&L Mild Steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.
M&L Mild steel screw bolts (machine made) 11-15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and directed by Engr-in-Charge.
M&L Mild steel screw bolts (machine made) 16mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L preparation new steel surfaces with two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Surface excavation not exceeding 30 CM deep and averaging 15 cm deep and getting out in Hard/Dense soil all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.00 kg of cement per square metre etc. all as specified and as directed.
M&L for PCC 1:4:8 type D-2 40mm stone aggregate as in foundation, filling and mass concrete etc all as specified and directed.
M&L for Hard Core (Broken stone /boulders) , broken to gauge n exc 63 mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and ramming to a true surfaces complete all as specified and directed.
M&L Cement concrete 1:2:4, type B-1(using 20mm graded stone aggregate) mixed with metallic floor hardener as per manufacturing instruction in flooring incl spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed by Engr-in-Charge. Note : Supply only Metallic floor hardener shall be measured and paid separetely.
Supply only Metallic floor hardener for using in Cement concrete.
Forming contraction/dummy joints 65mm deep and 6mm wide (using diamond cutter) filled with sealing compound Grade 'B' all as specified & directed. Note :- The sealant shall conform to IS-5818 and MAV of +30% with 10 years warranty.
M&L Cement concrete 1:2:4, type B-0(using 12.5mm graded stone aggregate) in flooring 40mm thick finished surface even and fair without using extra cement all as specified and directed by Engr-in-Charge.
M&L Precast cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.
M&L Rendering 15mm thick in cement mortar 1 :4 on fair faces of brickwork or concrete surfaces and finished the surfaces even and smooth complete all as specified and directed.
M&L for preparing new plaster surface apply two coat of Cement based paint over one coat of alkali resistant primer complete all as specified and directed.
M&L Cement concrete 1:2:4, type B-1(using 20mm graded stone aggregate) in surface channels and drains complete all as specified and directed.
M&L Walling of random rubble, uncoursed well bonded and solidly hearted built in CM 1:6 complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.
M&L Plain cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L Hand packing with broken stones or boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.
Returning, filling in including spreading leveling watering and well ramming in layers not exc 25 cm (soil) all as specified and directed.
Removing excavation materials not exc 50 metre and deposition where directed at a level not exc 1.5 M above the starting point (soil) all as specified and directed.
Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting in any type of soil complete all as specified and directed.
Excavation in trenches in exc 1.5 m wide and not exc 1.5 M depth for foundation and getting out in soft and loose soil complete all as specified and directed.
M & L hard core of broken bricks gauge n. exc 63 mm, deposited spreaded and leveled in layer not exc 15 cm thick, watered and rammed to true surface, broken stone or boulder complete all as specified and directed.
M & L cement concrete type B2 (1:2:4) using 40 mm graded stone aggregates as in foundation filling and mass concrete.
M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drain and manhole etc, complete all as specified.
M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection complete all as specified and directed.
M & L for RCC M-25 (design mix using 20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M 25 ( design mix using 20mm graded stone aggregate) for lintel beam, roof beam, cantilevers, bressummers etc complete all as specified and directed.
Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces
Use waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports over hangs etc.complete all as specified and directed.
M&L for mild steel TMT steel bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for mild steel TMT steel bars in reinforcement 5mm dia and over up to 10mm dia in stirrups cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for DPC 40mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
M&L for precast cement concrete 1:3:6 type C1 using 20mm graded aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:4) complete all as specified and directed.
M&L for precast cement concrete 1:3:6 type C1 using 20mm graded aggregate as in solid building blocks, 10cm in thick and setting in CM (1:4) complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic tiles Coloured 350 x 250mm/450 x 350mm 8 to 10 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed.
S&F for Mild steel bolts, purpose made, dia of bolt exc 11 but not exc 15 mm with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but not exc. 22.5 cm long complete all as specified and directed.
S&F for Mild steel bolts, purpose made, dia of bolt exc 11 but not exc 15 mm with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm long but not exc. 10 cm long complete all as specified and directed.
S&F for Pressed steel frames for doors with one or more rebates (Size of frame 105x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed
S&F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F for Solid PVC door frame of size 50 mm x 47 mm, made out or 5 mm, plain colour PVC sheet, reinforced with MS Square tube all as specified and directed.
S&F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and as directed.
S&F for butt hinges medium weight cold rolled mild steel 100 mm complete all as specified.
S&F for Aluminium anodised barrel tower bolt, of extruded section and fixed of 150 mm long complete all as specified and directed.
S&F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed
S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer all as specified and as directed.
M&L for preparation of new surfaces of wall of any description and applying three coat of white wash complete all as specified and as directed.
S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed
S&F 75 mm dia PVC (SWR) pipes single socketed fixed in walls and floors or trenches etc. complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore pipe complete all as specified.
All as per Srl item No. 68 here in before but 75 mm
S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 75 mm complete all as specified and directed
S&F PVC (SWR) 75 mm single junction T equal or unequal complete all as specified and directed
S&F PVC (SWR) 100 mm single junction T equal or unequal complete all as specified and directed
M&L for 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S & F PVC (SWR) vent cowl bore 110 mm.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding complete all as specified and directed.
Supply and fix Vitreous china urinal, bowl type, flat back, size of 465 x 355 x 265mm (minimum), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed.
S&F Vitreous china urinal partition slab white of size 310 mm x 700 mm terminating about 40 cm above floor level complete all as specified and directed.
S&F vitreous china wash hand basin (550x400 mm) white flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F 32 mm dia bore waste fittings brass chromium plated for glazed ware sink, basin etc with long screwed shank and fly nut , flange and bedded in red lead cement and other end fixed incl waste pipe of reqd length complete all as specified and as directed.
S&F 15 mm bore pillar tap cast copper alloy with capstan head, fancy type chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F Flushing cistern low level, PVC 10 Ltr capacity syphonic action type valve, valve less with inlet ball valve, float and handle incl bracket complete all as specified and directed.
S&F Flush pipe of polythene of low or high density or PVC, 32 mm dia for low level cistern complete all as specified and directed.
Supply and fix for PVC(LDPE), 32 mm dia, polyethylene, of pressure rating 6 kgf/sqcm, fixed complete to wall, ceiling or in floor, for wash hand basin including taking down of existing old pipe all as specified and as directed.
S&F PVC connection 15 mm dia and 450 mm long complete all as specified and as directed.
S&F CP grating of size 100 mm dia with waste hole complete all as specified
Supply and fix for towel Rail, brass chromium plated. 20 mm dia D type, 600 mm long between flanges complete all as specified and as directed
Supply and fix Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F soap dish acrylic type complete all as specified
Supply and fix for Gun metal gate valve,20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.
Supply and fix rotational moulded polyethylene water storage tanks ISI marked of 500 litre capacity (Cylindrical vertical with closed top) with HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I ,complete all as specified and as directed.
S&F 15mm dia stop valves/angle valve cast copper alloy, chromium plated, fancy type screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union complete all as specified and directed.
S&F 15mm dia Bib taps, cast copper alloy, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules and complete all as specified and directed.
S&F sheet glass 3 mm thick of ordinary quality and glazing with oil putty in square n. Exc.0.5 sqm in each pan complete all as specified and directed.
M&L for precast manhole covers in precast cement concrete Type B-1,1:2:4 (using 20mm graded crushed stone aggregates) set in cm 1:6 complete all as specified and directed.
M&L for point wiring in and including conduit pipe with surface type with 1.50 sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20 mm dia with its accessories, PVC sunken type terminal box made of 1.2 mm thick PVC sheet including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including for the one light/ fan/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.
All as per item No 96 here in before but one 5/6 Amps socket point controlled by one switch on same board with other switches
S&F switch piano flush type single pole , 5/6 Amps one way, 230 volts, all as specified & directed.
S& F socket outlet 5/6 Amps flush type piano 5 pin 230 volts all as specified & directed.
S&F ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals all as specified & directed.
Supply and fixing LED lights fitting 1x 18 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified & directed.
S&F MCB DB sheet metal enclosure Single pole and neutral 230 V with 200 Amps standard bus bar of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mounting type double door factory fabricate complete without MCB and with enclosure blank plates for unused way suitable for 8 way flush in wall all as specified & directed.
S & F MCB SPN 40 Amps 240 Volts C, series complete all as specified and directed
S & F MCB 6 to 40 Amps SP, 240 Volt C, series complete all as specified and directed.
M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Loose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20 mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.
Supply laying and testing in trenches, fixed to wall/pole cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 3 core complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in depth for laying of underground cable in hard/dense soil and getting out complete all as specified and as directed by Engineer-in-Charge.
M&L sub-class 'B' bricks, well burnt, laid breadth wise along the length for cable laid in trenches over sand cushion laid for UG Cable protection, complete all as specified and as directed.
M&L for sand cushioning dry fine for cable cushioning 8 cm below the cable and 15 CM above cable complete all as directed at site by Engr- in-Charge.
Material and labour for galvanised steel tubing light grade for protection of cable/earth continuity conductor fixed to poles/walls/roof or laid in floors, road crossing/in ducts fixed with clamps, bolts, nuts and washers etc complete all as specified and directed for 25 mm dia bore pipe.
S&F building security light fitting complete with 25 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution etc complete fixed bracket made out by GI pipe (light grade) of suitable size and MS clamp and nut bolts washers etc complete and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed. Cat Part No. ENDURASUNDOWNSL25W LED765PASYBOTGIHD IP 66 HSN code 9405 of Make : Havells or equivalent in Philips/Crompton/Bajaj.
M&L earth continuity conductor or main lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire.
M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia size confirming to IS 2079-1973 medium grade with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer, all fittings such as elbows, bends, junction boxes, saddles including PVC board (ISI Mark) and screws and rawel plugs including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by one, one way switch 5/6 Amps complete all as specified & directed.
All as per item No 114 here in before but for One socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch.
All as per item No 114 here in before but for One socket outlet 5 pin 5/6 Amps on same board with other one, one way switch.
All as per item No 114 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly all as specified and directed.
S&F switch piano flush type 15/16 Amps single pole one way all as specified & directed.
S&F socket out let 2-in-1, 6 pin 5/6 & 15/16 Amps all as specified and directed.
S&F LED tube light fitting two feet 10 watt, slim design, 230volts, including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector all as specified and directed.
S&F LED tube light fitting bright 18 watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector all as specified and directed.
S & F exhaust fan AC single phase 230/240, 50 HZ Volt of size 200 mm sweep MS body heavy duty operating with louvers shutter complete grouting the ragged bolt in wall fixing the frame and exhaust fan fix including louver shutter with frame on the exhaust side and connecting with PVC insulator 3 core 23/0.0076 copper wire rubber insulated from ceiling rose to exhaust fan motor complete all as specified and as directed
Supply and fix of DB, SPN 4 way double door for MCB, 240 volt with 200 amps rated bus bar with enclosure blank plates for unused all as specified and directed
Supply laying and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core in trenches or laid in floors/ road complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately.
Supply and fix of GI tubes light grade, galvanised, 32 mm bore including necessary GI fittings, laid in trenches or under floor or fixed with poles/walls for fixing of air termination complete all as specified and directed.
Supply and laying on wall, floor and Ceiling GI water tubing 25 mm medium grade ISI marked incl all types of fittings and accessories complete all as specified and directed.
All as per item No 126 here-in-before but of size 15 mm dia pipe complete all as specified and directed.
Supply and fixing Gun metal gate valve/glove valve 25 mm dia ISI marked with Iron wheel head screwed both end for GI tubing complete all as specified and directed.
All as per item No 128 here-in-before but of size 15 mm dia pipe complete all as specified and directed.
Supply and fix of GI tubes medium grade, galvanised, 25 mm bore including necessary GI fittings, laid in trenches or under floor complete all as specified and directed.
ms triveni nirman
MS Construction & Suppliers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .