Specification No.11/2022-23

Amount

Dismantling and clearing away from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Floor finish in cement mortar

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour etc.,complete.

Special type of plastering with CM 1:3 - 10mm thick by using special bonding agent and repair material including chipping of concrete, cost of materials,curing, labour, lead,lift etc., complete.

Flooring with approved double charged vitrified tiles of size 600 x 600 x 8 mm over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete.

Supplying,fabricating,erecting and fixing of 10 mm thick plaster of paris plain sheet (gyprock Pop board - Saint Gobain make) for false ceiling at a height of 3 m from the existing floor level,including cost of all materials, lead, lift, fabrication, carving, providing cornice work, droping design work,erection charges, cleaning and removal of debris from the work site, Interior painting with two coats of approved interior emulsion over one coat of primer .The False Ceiling design will be provided and execution of work is to be carried out as per the drawing and without any deviation etc., complete.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as brackets , waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.

Supply and fixing of PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing size of 600mm x 450mm including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixining of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia including cost of all materials lead, lift, labour etc., complete

Supplying, fixing and laying of UPVC pipe ( schedule40) for water supply arrangement including cost of all materials, labour, lead, lift etc complete.

25 mm dia

20 mm dia

Replacing of damaged door / windows wood with new CW planks of 30 cm wide with 25 mm thick should be fixed in position suitably as instructed by the field engineer at site incluing cost of all labour, lead, lift etc., complete.

White washing two coats using white cement including cost of all materials, labour, brushes, lead, lift,scaffolding charges, etc., complete.

Interior painting with two coats with approved quality Acrylic distember on application of one coat of alkali resistant distemper primer including cost of all materials,lead,lift etc complete

Exterior painting with two coats of approved exterior emulsion over one coat of primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Painting two coats with Ready mixed Synthetic Enamel Paint paint over old Grill work for the existing window including cleaning preparing the surfaces, cost of all labour, lead, lift etc., complete.

Painting two coats with Ready mixed Synthetic Enamel Paint paint over old wood work for the existing doors, window including cleaning preparing the surfaces, one coat of primer including cost of all labour, lead, lift etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) ( SD16 )

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non interlocking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 1200mm (48”) sweep AC celling fan (High Speed) of reputed make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing of 1 x 48 W LED Street light fittings including cost of all materials, labour, lead, lift etc., complete, as per standard specification.