Construction of day care Sub Center building at Salebhata for the year 2025-26

Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours, T and P etc complete as per the direction of the Engineer in charge.

Fly Ash Brick (23x11x8cm) size having crushing strength not less than 75kg/ cm2 with cement mortar (1:6) in foundation and plinth per cum. including all cost etc complete

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position.

Column Base

Plinth beam

Column shaft

Ground Floor

1st Floor

2nd Floor

Lintel

Ground Floor

1st Floor

Chajja

Ground Floor

1st Floor

2nd Floor

R.C.C. WORK IN FINS & WALLS

Ground Floor

1st Floor

Roof Beam

Ground Floor

1st Floor

2nd Floor

Roof slab

Ground Floor

1st Floor

2nd Floor

Stair case

Ground Floor

1st Floor

Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.

Ground Floor

1st Floor

2nd Floor

Fly Ash Brick (23x11x8cm) size having crushing strength not less than 75kg/ cm2 with cement mortar (1:6) in superstructure per cum. including all cost etc complete

Ground Floor

1st Floor

2nd Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor

1st Floor

2nd Floor

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor

1st Floor

2nd Floor

Supplying, fitting, fixing of Homogeneous tile in floors marbonite or equivalent make in all floors using Vetrified tile over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

1st Floor

Supplying, fitting & fixing of Granite tiles on floor including of all cost, conveyance etc all complete.including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

1st Floor

Supplying, fitting, fixing of Industrial tile in floors marbonite or equivalent make in all floors using Vetrified tile over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

1st Floor

Providing fitting &fixing of Ceramic tiles in dado including cost, conveyance etc complete. including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

Providing fitting &fixing of vetrified tiles in dado including cost, conveyance etc complete. (Homogeneous)

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.

Ground Floor

1st Floor

Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material.

Ground Floor

1st Floor

Factory made FRP (alternately called GRP) doorframe of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gel coat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw.

Ground Floor

1st Floor

Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge .

Ground Floor

1st Floor

2nd Floor

Supplying Fitting and Fixing of Two track UPVC Sliding Window of Approved Make with 6mm thick glass of approved quality complete with Frame shutter and all fitting and all fitting and Fixtures

Ground Floor

1st Floor

Providing two coat weather coat paint over a coat of wall primer including cost of weather coat paint etc. conveyance, royalties and taxes of all materials and labour with T & P required for the work as per direction of the Engineer-in-Charge.

Ground Floor

1st Floor

2nd Floor

Finishing plastered surfaces of walls with cement putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Ground Floor

1st Floor

2nd Floor

Plastic emulsion paint two coats of approved shade on new work.. including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

1st Floor

2nd Floor

Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Ground Floor

1st Floor

2nd Floor

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough sur

Ground Floor

1st Floor

2nd Floor

INR Five Thousand Four Hundred Ninety Three and Paise Eighty Three Only

INR Four Hundred Thirty Two Only

Point

INR Nine Thousand Four Hundred Fifty and Paise Seventy Nine Only

INR Twenty One Thousands Three Hundred Thirty and Paise Eighty Only

INR Eleven Thousands Six Hundred Sixteen and Paise Ten Nine Only

INR Nine Thousand Four Hundred Fifty and Paise Seventy Nine Only

INR Seven Thousand Nine Hundred and Paise Twenty Nine Only

INR Nine Thousand Four Hundred Fifty and Paise Seventy Nine Only

INR One Thousand Five Hundred Eighty and Paise Six Only

INR Nine Thousand Four Hundred Fifty and Paise Seventy Nine Only

INR Five Thousand Five Hundred Thirty and Paise Twenty One Only

INR Five Hundred Forty One and Paise Sixty Eight Only

INR Three Thousand Two Hundred Thirty Four and Paise Ten Only

INR Two Thousand Nine Hundred Seven and Paise Ninety Six Only

INR Nine Thousand Two Hundred Nine and Paise Sixty Four Only

INR Five Thousand Five Hundred Sixty Nine and Paise Twenty Only

INR Two Thousand Six Hundred Fourteen and Paise Twenty Only

INR Two Thousand Seven Hundred Fifty Five and Paise Four Only

INR Two Thousand Fourteen and Paise Forty Only

INR Four Hundred Ninety Three and Paise Twenty Six Only

INR Two Thousand One Hundred Fifteen and Paise Forty Eight Only

INR Three Thousand One Hundred Fifty Six and Paise Eight Only

INR Four Thousand Fifty Seven and Paise Thirty Six Only

INR Six Thousand Two Hundred Sixty Eight and Paise Forty Only

INR Forty Two Thousands Six Hundred Sixty Seven and Paise Fifty Only

INR Eighteen Thousands Fifty One and Paise Eighty Four Only

INR Ten Thousands Seventy Nine and Paise Ninety Eight Only

INR Eight Thousand Eight Hundred Thirty Three and Paise Fifty Only

INR One Thousand Seven Hundred Twenty and Paise Thirty Two Only

INR Seven Hundred Seventeen and Paise Seventy Only

INR Two Thousand Two Hundred Seventy Three and Paise Twenty Two Only

INR Thirty Thousands Eight Hundred Sixteen Only

INR Five Thousand Five Hundred Sixty Three and Paise Thirty Four Only

INR One Thousand Three Hundred Thirty Six and Paise Thirty Nine Only

INR Two Hundred Sixty and Paise Twent

Cables

ing of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.a.110mm dia PVC pipe

160mm dia PVC pipe

110mm dia PVC'P' trap

110mm dia.PVC S/J/D

110mm dia.PVC Door Bend

110mm dia PVC Plain Bend

110mm dia PVC Tee

75mm dia. PVC pipe

INR Six Thousand Nine Hundred Only

110mm dia PVC SWR Nanhi trap without jally

110mm dia PVC offset

110mm dia PVC Cowl

125mm dia CP greatings

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages etc.all complete as per the P.H. specification and direction of E.I.C.a.250mm thick wall

Roof cutting

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Parry ware/ Hind ware/cera/Equivalent)a.E.W.C with integral 'S' or 'P' trap

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.a. Seat cover for E.W.C

Supplying all materials,labour,T&P for fixings water closet,squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. a.580mm Orissa Pan(White) (Hindware/Parryware/Cerao/Equivalent)

Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C. (Parry ware/Hind ware/cera/Equivalent)a.550mmx400mmsizeWHB

Pedestrial WHB

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6),moulding&shapping the channel inside & benching with cc(1:1.5:3)using 12mm size HG chip,12mm thick cp(1:3) with punning to inside,cement flush pointing(1:3) to outside,RCC coverslab in cc(1;1.5:3)using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C.a.Inside size 500mmx500mmx460mm

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches (to level or slope) and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design,specification and direction of E.I.C.a.110mm dia PVC pipe with allround encasing

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork gravel packing in the rear of well steining,RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all materials to worksite,payment of royalty, taxes etc.all complete as per approved drawing,specification and direction of E.I.C.a.1.20mx 2.00m deep inside size

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank of conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above G.L and placing the tank in required position including conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a.1000ltrs capacity water storage tank

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.a.25mm dia PVC (ASTM) Pipe(Internal)

20mm dia PVC (ASTM) Pipe(Internal)

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs,etc. upto 19cm thick for passing GI/PVC pipes and fitting etc and repairing the holes after insertion of pipes etc with cc(1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) a.15mm dia C.P Bib Cock(L.B) Elbow Action

15mm dia C.P Bib Cock(L.B)

15mm dia C.P Bib cock(S.B)

INR One Thousand Eight Hundred Nine and Paise Sixty Only

INR Three Thousand Eight Hundred Ninety Two and Paise Seventy Nine Only

INR Two Thousand Four Hundred Seventy Six and Paise Twenty Only

INR Two Thousand Seven Hundred Ninety Five and Paise Thirty Nine Only

INR Seven Thousand Three Hundred Seventy and Paise Forty Only

INR One Thousand One Hundred Seven and Paise Eighty Only

INR Nine Hundred Fifty Seven and Paise Fifty Nine Only

INR Eight Hundred Only

INR Nine Thousand Five Hundred Eighty Only

INR Four Thousand Ninety One and Paise Fifty Only

INR Three Thousand One Hundred Seventy Six Only

INR Five Thousand Sixty Only

INR Two Thousand Seven Hundred Thirty Four Only

INR Seventeen Thousands Six Hundred Thirty Seven and Paise Sixty Only

INR Seven Hundred Ninety Three Only

INR Three Thousand Eight Hundred Seventy Three and Paise Thirty Only

INR Twenty Eight Thousands Three Hundred Eleven and Paise Forty Two Only

INR Three Thousand Eight Hundred Sixty Eight Only

INR Fifteen Thousands Eight Hundred Forty Nine and Paise Ten Five Only

INR One Thousand Four Hundred Seventy Five Only

INR Two Thousand Eight Hundred Nine and Paise Thirty Two Only

INR Four Thousand Three Hundred Two Only