RE TENDER OF SUPPLY OF MATERIALS FOR MGNREGS SHEME 2024-25

Amount

Materials Lists

Stone for masonry work

Portland Cement

Coarse sand (zone III)

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone aggregate 10 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3m

Beam clamp 300-380mm

Twisted steel/deformed bars

Hollow blocks of size 40x20x20cm

Adjustable span ESO+SI(2.35-3.4)

Fine sand (zone IV)

Mild steel tubes hot finished wiled type

Welding by electric plant

Vitreous China orrisa type w.c. pan size 580 mm

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm

Plastic emulsion paint

Synthetic enamel paint in black or chocolate shade

Deharadun white lime

Stainless steel kitchen sink - without drain board 470*420 mm bowl depth 178 mm

C.I. bracket for wash basin and sinks

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles ist 300x300 mm in all shades and designs of white, Ivory,grey, Fume Red brown etc.

Vitreous china flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

Mild steel round bar 12 mm dia and below

Mild steel tubes electric resistant or inducti

Flats up to 10mm in thickness

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

GI traford profile sheet 0.35 mm thick

Bitumen washer

GI Limpet washer

Galvanised steel J or L hooks 8 mm dia

Galvanised steel bolts & nuts 6mm dia and 25 mm long round head with slots

PVC pipe 63 mm outer dia 4kgf/cm2

PVC pipe 40 mm outer dia 10Kgf/cm2

PVC pipe 75 mm outer dia 6Kgf/cm3

PVC pipe 110 mm outer dia. 6kgf/cm2

PVC bend 110 mm dia

PVC Elbow 75 mm dia

PVC end cap 75 mm dia

PVC end cap 110 mm dia

Mild steel plates

G.I pipes 40mm dia

Mild steel round bar above 12 mm dia

Solid blocks of size 30x20x15cm

Galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm

Wire nails

Precoated aluminium traford sheet 0.45mm thick

Safeda ballies 125 mm diameter

Second class kail wood in planks

Second class kail wood in scantling

wall form panel 1250*500 mm

Corner angle 45*45*5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Quarry waste

Sundries

Inter locking CC paver block (80 mm thick M-30)

Solid blocks of size 40x20x20cm

Royalty for good earth

Mani PWD Contractor (BID ID -2043727)