SPECIAL REPAIR TO SECURITY FENCING AT TECHNICAL AREA AT 2 WEU KHAMBHALIYA UNDER GE (AF) JAMNAGAR NO.2

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil, complete all as specified and directed.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.

Supply and fix PVC coated chain link fencing, of aperture 50x50x4.00 mm thick including provision of binding wire complete all as specified and directed. Note : Straning bolts, nuts and washers, flat iron and 10 mm dia bars shall be measured and paid seperately

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire barbed with 2.24 mm dia bars at 75 mm spacing and straining & fitting to any type of standard rails straning bolts, including securing or tving at crossing with the provision of galvanized MS wire staples or steel pins complete all as specified and directed. Note : Each line of steel barbed wire to be measured.

M & L for cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing precast cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregate) solid building blocks exc 10 cm in width (with plain or inter locking joints as directed) setting in CM 1:6 in wall or pillars complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of pcc block masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing of new plastered surface of wall and for applying two coats cement based paint white over a coat of primer as per manufactures instruction complete all as specified and directed.

M&L for preparation of new iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.