C/o D/sala Yol Dadh Plp Holta Chadiar Sandhol road at Km 15/00 to 40/500 (SW- Extemded width of R.C.C slab culvert RD 17/060, 21/450, 22/830, 22/375 and R/Wall at RD 23/850 to 23/860, RD 25/010 to 25/023, Edge Wall at RD 24/00 to 24/015, Crash Barrie

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing Cement concrete 1:2.5:5 (One Cement : Two and half Sand : five crushed stone aggregate) Nominal Mix, P.C.C. grade M-15 (M-Fifteen ) in sub structure complete as per drawings and technical specifications Clasue 802,804, 805. 806, 807, 1202 and 1204 including carriage of materials with in all leads, lifts and other incidental .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm (Twenty milimetre) nominal size) , as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing weep holes in brick mansonry/ stone masonry / plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of the structures with slop of 1 (v) : 20 (H) towards drain face complete as per drawing and technical specification clause 614, 709, 1204.307 as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Back filling granular material behind R/Wall, abutment wing wall and return wall complete as per drawing and technical specifications clause 1204.3.8 as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government. (A.R)

Providing and laying in position cement concrete 1:4:8 (One cement : four sand : eight graded/crushed stone aggregate 40mm (Forty milimetre) nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metall beam rail. 70cm. (seventy centimetre) Above road/ ground level, channel vertical post 150 x 75 x5 mm ( one hundred fifty into seventy five into five milimetre) spaced 2m ( Two metre) centre to centre, 1.8m (One point eight metre) high, 1.1m (One point One Metre) below ground/ road level, all steel parts and fitmetns to begalvanised by hot dip process, all fitting to conformed to IS: 1367 and IS: 1364 matel beam rail to be fixed on the vertical post with sa vanized by hot dip process, all fitties to conform to IS: 1367 and IS 1364, metal beam rail to be fixed on the veritical post with a spacer of channel section 150x75x5mm, 330 long complete as per MORTH specification No. 810 as per the direction of Engineer-in- Charge including carriage of materials with in all leads, lifts and other incidental . The rate including of octroi,royality,Malkana,toll tax ,sales tax or other taxes imposed by the government.

Providing, laying, Wearing 63 to 45mm ( Sixty three to forty five milimetre) nominal size Grading-2, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 Kn. in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification Clasue 405 as per directions of Engineer-in-charge including carriage of materials, within all leads, lifts and other incidentals.

Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement concrete prepared with batch mixing machine as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc as per the satisfaction of Engineer-in-charge including carriage of materials within all leads and lifts of materials and other incidentals .

RAJEEV KUMAR ANAND

SANJAY SAINI