SPL REPAIRS TO BLDG NO P08 AT ASCON NODE BARAKH SUNDERBANI UNDER GE (NORTH) AKHNOOR

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof covering etc complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre- painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and as directed.

Dismantling structural steel work including doors, gates, framed truss etc., complete all as specified and as directed.

Rolled mild steel structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290 (Gde-E-165) complete all as specified.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets GI framework complete all as specified and directed.

False ceiling of grid of galvanized steel tee/ angle (powder coated ) of grid size 600x600mm as comprising of main and secondary tee ( weight not less than 240gm /RM) and wall perimeter angle (weight of section not less than 217gm/RM) all around of walls suspended with 4mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type including 4mm thick everest designer ceiling boards size 595x595mm fixed in position all as directed.

Restraining,resecuring including making good of loose/disturbed GI snap grid ceiling frame work incl carefully taking down ceiling board and refixing/fixing new one in position if required, complete all as specified and directed. Note:-Supply only ceiling board required for replacement if any shall be measured & paid under relevant item.

Supply only 4mm thick prelaminated designer ceiling board (excluding framework) all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but n.exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. (Sample as approved by GE & kept in sample room).

Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc area of each tiles exceeding 0.18 Sqm but not exc 0.38 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement and sand mortar (1:6), complete all as specified and as directed. (Sample as approved by GE & kept in sample room).

Description all as per srl item No 12 here-in-before but as in skirting over & including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and directed.

Glazed ceramic coloured tiles (450x300mm)/(600x300mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:3, complete all as specified and directed.

M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floor/wall incl screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed

Granite (of any type) work glossy finish double charged 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite including 15mm thick screed of CM 1:6 after applying cement slurry@3 kg/sqm of cement per sqm, complete all as specified. (Note : A hole shall be drilled in the Granite after fixing for gas pipe all as directed by Engr-in-Charge).

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.

Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs,lock strike plate etc.complete including bottom of chowkat to be welded with 01 Nos 25x3mm thick flat iron & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back filling of pressed steel frame, complete all as specified & directed.

Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs,lock strike plate etc.complete including bottom of chowkat to be welded with 01 Nos 25x3mm thick flat iron & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back filling of pressed steel frame, complete all as specified & directed.

40 mm thick Flush shutters, solid core with particle board exterior grade as per IS-2202 of 199 (Part-I). Flush door shutter shall be internally lipped as per clause 8.52.2 of SSR-2009 Part-I complete all as specified and directed.

35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Powder coated aluminium anodised door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

Powder coated anodised aluminium window / ventilator( glazed / gauged skeleton shutter ), (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No. ) suitable handle (1 No.) complete all as specified and as directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staple complete all as specified.

Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width and of weight between 61 to 80 kg, ISI marked, complete all as specified and as directed.

PCC 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in coping, benching, levelling course including rounded or chamfered angle as directed including necessary form work etc., complete all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

Preparation new steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer, complete all as specified and as directed.

Preparation of old steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and as directed.

250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.

300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP bracket fixed in repairs, complete all as specified.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework, complete all as specified and as directed.

Walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified.

Description all as per item No.45 above, but except stone, complete all as specified and directed

Raised pointing to random rubble, uncoursed or brought upto course masonry in CM 1:4 complete all as specified.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face stones (lime and sand stone) and dressing of face beds and joints, complete all as specified.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick cement plaster with cement mortar(1:6) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified.

GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and fixing new to old as required all as spd and directed.

Applying 3mm thick wall care putty over newly plastered surfaces of wall, complete all as specified and directed.

Washing, rubbing down and stopping of distempered/ painted surfaces with preparation of old surfaces and applying 3mm thick wall care putty complete all as specified and directed.

Applying two coats of oil bound distemper on walls over a coat of chalk whitening primer complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.

Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coat of oil bound distemper complete all as specified and as directed.

Preparation of old painted surfaces by washing, rubbing down and stopping of plastered surfaces and applying one coat of cement base paint white or tined on wall complete all as specified and as directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal as required unsv pipe with all fittings from site, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal as required unsv pipe with all fittings from site, complete all as specified and directed.

Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings, complete all as directed.

Description all as per item No.64 above but 20 mm bore.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 20 cm girth in stone, concrete, block or slab walls, complete all as specified.

Vitreous china wash basin, white, flat back, size 550x400mm including CP mixer for mixing hot and cold water for pipe of bore 15mm, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets and waste pipe etc., fixed in repairs complete all as specified and as directed. Cat Part No. 10036 of Hindware (Model-Windsor) or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.

PVC valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed.

Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm fixed in repairs, complete all as specified and as directed.

Tubular towel rail 60cm long 20mm dia D type stainless steel incl necessary brackets fixed in repairs complete all as specified and directed.

Bib tap 15 mm bore with flange, Brass CP, fancy type(long body). with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repairs, complete all as specified and as directed.

Brass chromium plated shower rose 125mm size with or without swivel joints, with arm any size, including fixing to steel pipe or union fixed in repairs complete all as specified and directed

Pillar taps 15mm cast copper alloy CP, fancy type with capstan head, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore.fixed in repairs, complete all as specified and as directed.

Vitreous china wash down water closet pan pedestal pattern in white colour with 'P' or 'S' traps excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortar incl making good dismantled floor with PCC 1:2:4 B-0 (using 12.5mm graded crushed stone aggregates), 'P' trap fixed in repairs complete all as specified and directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make specified in list make as approved by GE.

Stainless steel Soap dish, any type, fixed with plugs chromium plated brass screws fixed in repairs complete all as specified and as directed. Cat part No-AQN-7733 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45cm long fixed in repairs, complete all as specified.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 meter long flexible spirochrome flex tube and ABS wall hook including making connections complete in all respect as specified.Make-Jaquar Cat part no. ALD-573 or its equivalent cat part of make specified in list make, as approved by GE.

Plastic water closet seat cover white in colour closed pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, complete all as specified and directed.

PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement fixed in repairs complete all as specified.

Taking down eaves gutters and rain water pipe , soil and waste pipe PVC or CI (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc all as specified and directed.

110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in floors etc., complete all as specified and directed.

110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints fixed to wall with PVC/MS holder clamp etc., complete all as specified and directed.

75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in floors etc., complete all as specified and directed.

PVC SWR Type-B cowls 110mm bore all as complete all as specified and directed.

110mm bore PVC Bends (any radius) for pvc pipes complete all as specified and directed.

PVC (SWR) bends any radius 110mm dia with oval access doors complete all as specified and directed.

110mm PVC (SWR) junction single, (single T) equal or unequal provided with access door, complete all as specified and directed.

PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

PVC (SWR) bends with access door 75mm dia complete all as specified and directed.

PVC (SWR) junction single (single T) equal or unequal 75 mm dia with oval access door all as specified and directed

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for including removing the rubbish off the premishes all as specified and as directed.

Reinforced cement concrete (Nominal mix), type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste form work, complete all as specified and as directed.

TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete for One light point/fan /bell point controlled by one switch. all as specified and directed :- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

-Ditto- All as per item No-99 here-in-before but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

-Ditto- All as per item No-99 here-in-before but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete for One 15 amps power socket outlet point controlled by one 16 amps switch on independent board.all as specified and directed for the following:- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers are to be used of same make/brand only and shall be deemed in to included in quoted rate only).

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including Casing and caping of suitable size on walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for One light point/fan /bell point controlled by one switch.:- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

-Ditto- All as per item No-103 here-in-before but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

-Ditto- all as per item No-103 here-in-before but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including casing and caping of suitable size on walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface for One 15/16 Amps power socket outlet point controlled by one 16 Amps switch on Independent board.complete all as specified and directed :- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

Modular type switch 6 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and directed. “Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.

Modular type switch 16 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and directed. “Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.

Modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed. “Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.

Modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked Complete all as specified and directed . “Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.

Energy saving LED lamps 12watt, 230 volts, 50 HZ , 0.95 PF. complete all as specified and as directed. Make- Havell Cat part No LHLDERHEMD8X012 or equivalent of Make-Phillips, Crompton, wipro, bajaj as approved.

Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, surface bakelite 65 x 50mm, complete all as specified and directed.

Fan regulator modular type electronic, stepped type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed. “Cat part No ACVRFHW008 of Crabtree (Havells) or its equivalent cat part of make make Anchor, Legrand, Schneider as approved by GE”.

LED light fitting 1x20W, 220V, general purpose surface and wall mounted LED batten with Auminium housing integrated electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and removal old unsv fitting complete all as specified and directed. Make: LUMILINE+BS20WLED840SPCSS of Havells or equivalent in HPL, Bajaj, Surya, Benlo as approved''.

LED light fitting 1x10W, 220V, general purposes surface and wall mounted LED batten with polycarbonate housing integrated electronic driver connecting up with two core flexible copper conductor cable of suitable size from ceiling rose and removal old unsv fitting complete all as specified and directed. Make- Havells cat part No LUMILINEBS10WLED865SPCWH or equivalent of Make-Surya, bajaj as approved.

LED light luminaire 600mm x 600mm 35/36 watt, 220 Volts AV recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, Holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make- Havell Cat part No-PLUTONEO2X2PLR28WLED840S or equivalent of Make-Phillips, Crompton, wipro, bajaj as approved.

LED light fitting 1x10W, 220V, Bulk head luminaries including LED driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make- Havell Cat part No-RUGBYGENXFTS10WLED865SSYMBOPC or equivalent of Make-Phillips, Crompton, wipro, bajaj as approved.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, blanking plates where required testing and commissioning in replacement, complete all as specified. Make:- Havells cat part No-DHDPSHODPW08 or its Equivalent cat part of make of Legrand / ABB / L&T as approved by GE.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, blanking plates where required testing and commissioning in replacement, complete all as specified. Make:- Havells cat part No-DHDPSHODPW12 or its Equivalent cat part of make of Legrand / ABB / L&T as approved by GE.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. Make:-Havells cat part No-DHMGCSPF006-032 or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE

MCB single pole & neutral 40 to 63 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. Make:-Havells cat part No-DHMGCSPF040or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE

Supply & fixing and in repair sheet metal enclosure double door 240 volts AC, VTPN distribution board 4 way for flush mounting with 200amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 125Amps and MCB SP/DP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including M&L for MCCB 125Amp, TPN 16KA, 415 Volts as incomer and 06 Nos MCB, SP, 63 Amp, C Series as outgoing including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Havells, L&T/Legrand as approved by GE.

Ceiling fans complete with blades, down rods, and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) including taking down old unsv fan and depositing in MES Store Yard, complete all as specified and directed. Make:- Cat Part No Zinger of Make Havells or its Equivalent cat part of make-BAJAJ,CROMPTON GREAVES, GEC, KHAITAN,ORIENT as approved by GE.

Taking down old unserviceable Exhaust fan of any type/size from existing location and depositing the same in MES store yard and Supply and fix Exhaust fan single phase metal body, AC 230 Volt, 50 Hz of size 300mm sweep with louvers shouter complete with all accessories including connecting up from ceiling rose to motor all as specified and directed. "Cat part No refresh air SPS of Havells standard or its equivalent in Bajaj, Orient".

Electric water heater storage type, capacity 25 litres and heating element 2KW, BEE 5 Star rated complete with all accessories such as a safety valve, thermostate, NRV, connection pipes of GI/PVC and necessary electric connections etc including taking down existing and depositing in MES Store Yard. Make : Crompton/Havells/Bajaj as approved.

Sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code and applying putty including cutting and chiselling and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM.

Earthing complete with galvanized steel earth plate electrode 600mm x600mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connecting to the Galvanised iron earth wire 4.00mm dia, by means of bolts, nuts, heck nuts and washers of galvanized iron and earth lead protected by provision of GI medium grade pipe 15mm bore incl provision of concrete pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape Gl medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 40mm x 8mm Fl with fixing arrangement, funnel, wire mesh and earth work in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs, all as per electrical plate No 5 of SSR-1991 Part I and connected to earth test point all as specified or indicated incl testing on completion.

Earthing complete with Copper Earth Plate electrode 60 cm x 60 cm x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground) with top edge of plate not less than 1.5m below normal ground level connecting to the copper earthing strip 20x3mm by means of bolts, nuts check nuts and washers of galvanized iron and Copper Strip 20x3mm protected by provision of GI Light grade pipe of 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 40mm grade crushed stone aggregrate iwh 40mm thick cover of RCC (1:2:4) reinforced with PM (weight not less than 4Kg/sqmm) and frame of angle iron 25x25x6mm with lugs 02 nos and 6mm dia MS bars handle made to shape, GI Light ggrade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge for earth platem common salt and charcoal filling, test point made out of 75x50x6mm phodphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hand/ dense soil rning filling in andremoval of surplus soil to a distance not exceeding 50m all as per electrical plate no 3 of SSR 1991 Pt-I and connecting to earh test point incl testing on completion. Note:- The required resistance of Earthing shall be less than 2 ohm, If not found to the required resisstance, the contractor has to re earthing for required resistance and the cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance.

Earth continuity conductor or main earthing lead to fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation floor loop earthing etc. as required 20 x 3 mm copper strip complete all as specified and directed.

Replacement air termination single pointed aluminium rod 12 mm dia, 300 mm long fixed incl taking down unsv air termination rod complete as specified and directed. Note : (i) Cost of GI pipe for fixing of rod is included in the rate. (ii) Cost of minor job and spares required for fixing of aluminium rod on PCC block & for fixing Aluminium strip to rod is deemed to be included in the quoted rate.

Taking down burnt cable and Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor. 1100 Volt grade, cross sectional area 50 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth as in foundation etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed.

Sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying and stretching the cable in trenches including hand punning and consolidating, punned to 18cm thickness, complete all as specified and directed. Note : For payment purpose, only punned thickness shall be measured.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed. Note :-Sand cushioning to be paid under relevant item.

M/s Mool Raj Ramesh Chander (BID ID -3258534)

narayan construction (BID ID -3263671)

NATIONAL TRADING COMPANY (BID ID -3263317)

VEER SINGH CONSTRUCTION (BID ID -3259820)

BALVINDER SINGH AND SONS (BID ID -3258399)