SPECIAL REPAIR TO BLDG NO P-87 AND P-90 AT PERIYAR VIHAR, RESIDENTIAL AREA AMBALAPADY

Amount

Demolition of RCC roofs, floor (other than ground floors), beams, staircase, landing, chajjas and similar suspended work incl reinforcement cut as required to facilitate demolition up to 4th storey high complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Material & Labour for providing and fixing stainlesssteel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L Framed brackets of angles or tees with web & flanges cut to shape, drilled and countersunk for fixing in walls, screw & welding reveting etc confirmimg to Fe-290 Gde E-165 up to 4th storey high complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar as specified upt 4th storey high in CM 1:3 at the junction of sunshade & wall, shelves, lintels etc and making good n exc 10cm grith complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face jamb into the wall n exc half brick wall built in cement mortar complete all as specified and directed.

Chip and remove all damaged and de bonded concrete and palster from the RCC Column, beam, flights, landing, railing and slabs by manually or mechanically so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete upto 4th storey high and labour charges for dumping the debris within a radious of 100 meters complete all as specified and directed.

Supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd) or Amandur, (Manufactured by GK Technom) over the corroded reinforcement bar where ever micro concerting is required and cleaning the same after application includuing the cost of all materials rent of tools, sacffolding and cost of painting brush etc complete upto 4th storey high all complete all as specified and directed.

Supply and application of Nitozinc Primer (M/s Fosroc Chemicals India Ltd) or equivalent make mentioned in list of makes over the exposed steel reinforcement after removing the rust scales from exposed reinforcement rods in one squre meter area including the cost of all amterials rent of tools, sacffolding and cost of painting brush etc complete upto 4th storey high complete all as specified and directed.

Supply and appliaction of Nitobond EP (manufactured by M/s Fosrock Chemicals India Ltd) or equivalent make mentioned in list of makes epoxy bonding agent over the old concrete surface including the cost of all amterials rent of tools, sacffolding and cost of painting brush etc complete upto 4th storey high complete all as specified and directed.

Providing additional reinforcement bars in place of more that 1/3 corroded reinforcement bars incl the charges for cutting, bending, placing and fixing in position using Lok-Fix or equivalent make mentioned in list of makes (Manufactured by M/s Fosroc Chemicals India Ltd) including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges including the cost of steel bars complete all as specified upto 4th storey high complete all as specified and directed.

Supply & Provisoning Renderoc RG (Manufactured by M/s Fosroc Chemical India Ltd) or equivalent make mentioned in list of makes to an average thickness of 70mm for beam and column, fluid micro concret shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power opertatd slow speed stirrer and pouring inside the form work including the cost of all materials rent for tools, scaffolding and labour charges complete all specified upto 4th storey high complete all as specified and directed.

Supply & providing of shear connecotrs of 8mm dia inside 12mm dia holes at 50mm deep @ 500mm C/C after cleaning the holes to remove the dust perticles and fixing the shear connectors using Likfix S (Manufactured by M/s Fosroc Chemicals India Ltd) or equivalent make mentioned in list of makes Polyster resin anchor grout, including the cost of material, rent of tools, scaffolding and labour charges etc complete all as specified upto 4th storey high complete all as specified and directed.

M&L RCC (nominal mix) type B1 1:1.5:3 (20 mm graded aggregate) in Slabs supported on walls,beams and columns in floors,roofs, deck slabs and in shelves complete all as specified and directed.

M& L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, deck slabs and similar work; not exceeding 200mm thick, rough finished surface of concrete, flat complete all as specified and directed.

M & L TMT mild steel bars mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia securing with clips complete all as specified and directed.

Demolition of unreinforced cement concrete including roof treatment from roof chajjas and similar suspended work complete all as specified and directed.

Brushing neat cement slurry with 3.00 Kg of cement per Sqm with WPC complete all as specified and directed. Note :- WPC will be measured and paid seperately.

M/L 25mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor finished even and fair complete all as specified and directed.

Rendering 15mm thick on fair faces of concrete surfaces in CM 1:3 finised even and smooth without using extra cement with using WPC complete all as specified and directed. Note : WPC will measured and paid seperately.

Supply only liquid water proofing compound.

M & L water proofing treatment to roof as specified below:- RCC surface shall be made dry , clean, even and checked for soundness. Removal of oil,dirt,laitance and other comtaminants by manually and surface shall be fairy smooth finish. Chamfering the floor wall juctions with cement mortal 1:4 admixed with Nitabond SBR or equivalent @ 1 litre per 50 kg bag of cement. Down take rain water pipe Annuar space packing using Conbextra GP2 or equilvalent mixed water and filing as per manufacturers specification. Water ponding for minimum, for 48 hours and injection grouting of construction joints, leaking spot and honey combs woth cementatious pressure grouting with 40 psi pump using Cebex 100 or equivalent @ 225 gms mixed to 50 kg bag of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Forsoc Nitoproof 600 or equivalent, over dry surfaces and 1.5 mm thick with 2 coats with interval period of 6hrs over substrate at a coverage rate of 2kg/sqm using spray/squeegee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90) tear resistance of 21KN/m (ASTM D 624-00) and tensile strength of > 1.9N/mm2(ASTM D412-90). Termination to be done on wall extending the coating to min 300mm height above the finalized floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete complete all as specified and as directed.

M&L for PCC screed to slope including providing batching mixing transporting and laying controlled screed concrete of M20 grade of average 75mm thickness with a minimum thickness of 50mm at drain points and slope of 1:150 or required as per the site condition at all levels by admixing necessary admixtures CONPLAST WL or equivalent @150ml per bag or cement and mixing graded fibrillated 100% virgin poly propylene fibres in concrete at the rate of 0.9Kg/cum as per manufactures specification.

M&L water proofing treatment prepare the water proofing slurry by adding DITACHMENT (Polymer modified mineral based powder) into water diluted NAFUFLLBB2 (acrylic based polymer binding agent) diluted with 4 part of water and apply this slurry@ 2Kg/Sqm in two coat complete all as specified and directed.

M&L Roof tiles, Mangalore pattern,interlocking at side joints, laid dry complete all as specified and as directed.

M&L ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

Taking down chowkhats or frames not exc. 1.50 sqm each without taking off shutters from the frames complete all as specified and directed.

Taking down chowkat without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exc 2.0 Sqm each complete all as specified and directed.

Taking down shutter exceeding 1 Sqm and not exc 2.0 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws complete all as specified and directed.

S&F second class HW plain soild straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered , put together with glue pinned at joines all as specifed.

S&F Flat iron holdfast and similar small articles conforming to Fe 410-0-01 Fe 310-0 complete all as specified and directed.

M&L for treating ends of posts backs of chowkhats etc area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each complete all as specified and directed.

S & F Treating smallar articles such as stop overs gally gratings hold fast etc area n.exc 0.1 Sqm each complete all as specified and directed.

M & L 2 nd class HW factory made plain framed panelled shutters 35 mm thick (two panel with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size rail and stayle as per IS : 1003 (Part-I ) kiln seasened and chemically pressure treated.

S&F 2nd class HW glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass gauge etc. but devided in to squares with plain chamfered or rounded , mitred and rebated sash bars any Nos fitted with cut and mitred beads for securing glass etc. with lock rail size of members of shutters as specified in SSR Part I Sec 8 clause 8.20(A).

S & F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc including applying acrylic emulsion sealent along aluminium window frame side to fill the gap between frame and sides of opening complete all as specified

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m or above including necessary joining cleats, glazing clips,rubber packing, powder coated aluminium snap beading, screws,aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle locks complete all as specified

S&F powder coated aluminium Deco grill of design DG-104 pattern made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4X15.3X1.4 mm thick all as per manufactures instruction complete all as specified and as directed.

S&F stainless steel wire cloth 0.45 mm nominal dia and average width of aperture 1.40 mm and fixed with aluminium wire staples all as sspecified and directed .

Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing

S&F butt hinges of 100mm size medum weight cold rolled, mild steel complete all as specified and directed.

S&F aliminum anodised barrel tower bolts of extruded section and fixed 200 mm length complete all as specified and directed.

S&F aliminum anodised barrel tower bolts of extruded section and fixed 150 mm length complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed of size 100mm complete all as specified and directed.

S&F mild steel butt hinges 75mm, medium weight cold rolled, mild steel all as complete all as specified and directed.

S&F sheet glass ordinary quality 4.0 mm thick and glazing with neoprene/PVC gasket for aluminium frame in square n. exc 0.5 sq.m in each pane complete all as specified and directed.

S&F sheet glass ordinary quality 4.0 mm thick and glazing with neoprene/PVC gasket for aluminium frame exc 0.5 sq.m in each pane as complete all as specified and directed.

S&F Figured glass 4.0 mm thick, pin head type and glazing with neoprene/PVC gasket for aluminium frame in squares n exc 0.5 sq. m in each pane complete all as specified and directed..

S&F extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flange when open 30mm complete all as specified and directed.

S&F 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S& F Aluminium alloy anodised, sliding door bolt 300 mm with hasp & staple (bolt type ) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium bow handles 100mm fabricated type, anodised as complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on fair faces of brick masonry or concrete surface in CM 1:6 finished fair and even and a protective coat of plastering in CM 1:4, 5mm thick, mixed with water proofing compound finished even and smooth without using extra cement (WPC will be measured and paid seperately) complete all as specified and directed.

Rendering 10mm thick in CM 1:3 in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M/L for Preperation of new plastered surfaces of wall and apply two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M/L for complete removal of existing treatment and preparation of old surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M/L for preperation of new palstered surfaces of ceiling and apply three coats of white wash complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Material & Labour for complete removal and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces.

M/L for preperation of old plastered surfaces of ceiling and apply One coats of white wash complete all as specifed and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for 450x350/450X300 mm, 6 to 8mm thick glazed coloured ceramic tiles as in dado incl 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified and directed.

S&F 20 mm dia brass Chromium plated Curtain rod complete all as specified and directed.

S&F 20 mm dia brass Chromium plated bracket for Curtain rod complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 7 to 8 mm thick (Square/ractangular )area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed

All as per item No.73 above but skirting over 10 mm thick CM 1:3 plater complete all as specified and directed.

M&L Joint free Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectagular) polished,area of each tiles exc 0.18sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed

All as per item No.75 above but skirting over 10 mm thick CM 1:3 plater complete all as specified and directed.

M&L 20mm thick Granite(of any type) machine cut, in cooking platform incl bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20mm cement screed 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing complete all as specificed and directed.

Rounding to edges of stone slab one edge cooking platform and other simlar work complete all as specificed and directed.

M&L prepolished kota stone slab 18 -20 mm thick flooring laid over 20mm cement screed 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing complete all as specificed and directed.

All as per item No. 79 above but in riser of step ,skirting ,dado etc laid over 10mm thick screed in cm 1:4 complete all as specificed and directed.

S&F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x160mm complete all as specified and directed

Dismantling of water tank of exc 250 litre and not exceeding 500 Litre capacity and removing complete all as specified and as directed.

S&F rotational moulded polythelene water storage tank 500 Ltr capacity including tank cover (cylindrical vertical with closed top hoisted and fixed in position complete all as specified and as directed.

disconnecting existing water tank exc 250 Ltr and n exc 500 Ltr setting aside (or lowering if required) for repair,cleaning etc and hoisting if required reconnecting and refixing in position (Cleaning ,repairing etc shall be measured and paid seperately) complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed.

S&F health faucet (ABS body) mild steel chromium plate suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.

M&L 75mm dia PVC(SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down GI tubing 15mm complete all as specified and directed

Supplying and laying of 20 mm outer dia. CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified

Taking down GI tubing 20mm complete all as specified and directed

Supplying and laying 25 mm outer dia. CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

PVC (SWR) floor trap 75mm plain with grating including jointing with solvent cement complete all as specificed and directed.

S &F Brass chromium plated shower rose 125mm size in repairs complete all as specified.

S&F in 15mm bore bib tap Chromium Plated fancy type cast copper alloy with crutch or butterfly hadle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in 15mm Pillar cock Chromium Plated fancy type cast copper alloy with crutch or butterfly hadle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed .

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) m complete all as specified and as directed.

S&F stainless steel soap dish complete all as specified and as directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed .

S & F Stainlee steel utensile rack of 24''X24''X10"1 complete all as specified and as directed .

S&F vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cictern and flush pipe) with P or S trap and seat cover including taking down old IWC and making good disturbed portion complete all as specified and as directed.

Supply & Fix dual channel PVC valveless, syphonic action type, flushing cistern, low level,10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed .

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specificed and directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) reducers 110mm complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes of 100mm bore, jointed in cement mortar and taking out of trenches and wall complete all as specificed and directed.

S&F PVC (SWR) pipes single socketed in any length 110mm bore with rubber ring joints fixed to walls complete all as specificed and directed.

M & L for preperation of new surface of wood and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.

M & L for preperation of old surface of wood and applying one coat of synthetic enamel paint complete all as specified.

M& I Preparation of new steel surface of any description, over 10 cm in width or grith, not otherwise described and applying two coat synthetic enamel paint over a coat of red oxide/zinc chrome complete all as specificed and directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed .

75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in plinth protection complete all as specified and all as directed.

M&L for 75mm thich PCC 1:3:6 Type C2 40mm graged aggregate finished even and fair without using extra cement complete all as specificed and directed.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed over 20mm thick screed bed in CM 1:6 and set jointed and pointed with grey cement with pigment in neat cement slurry in floors, and cut and polished complete all as specificed and directed.

Demolition of Brick work or stone/boulder masonry, laid built in cement mortor complete all as specificed and directed.

demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specificed and directed.

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specificed and directed.

M&L Concrete bed 1:3:6 type C2 for150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specificed and directed.

M&L 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specificed and directed.

M&L cement concrete type B1 1:2:4 (20mm graded agg) in surface channels and drains complete all as specificed and directed.

M&L Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (20mm graded agg) exc. 10 cm in width and setting in cement mortar 1:6,complete all as specificed and directed.

M&L cement concrete type B1 1:2:4 (20 mm graded agg) copings water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, incl necessary form works complete all as specificed and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces incl finished even and smooth with Neeru finish to plastering complete all as specificed and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specificed and directed.

All as per item No. 125 above but Add or deduct for each 25 mm girth or part thereof over or under 30cm .

M&L per cast RCC type B1 1:2:4 (20mm graded agg) but in landings, cover slabs set in CM 1:4 (for man holes etc.)and similar articles with plain faces complete all as specificed and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specificed and directed.

M & L For point wiring controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including PVC conduit of suitable size in concealed conduit and all acessaries, fire resitant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminayed hylem sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq.as earth continuty conductor and makingn good the disturbed surfaces of walls/floors/ceiling for one light point controlled by one switch etc all as specified and directed.

All as per item No.129 above but for One ceiling fan point controlled by one switch complete all as specificed and directed.

All as per item No.129 above but for One 3 pin 5 amps socket outlet controlled by one switch on the independent board complete all as specificed and directed.

All as per item No.129 above but for One 3 pin 5 amps socket outlet controlled by one switch on the same board complete all as specificed and directed.

All as per item No.129 above but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specificed and directed.

All as per item No.129 above but for One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specificed and directed.

All as per item No.129 above but for cable 2.5 sqmm for One 3/5 pin socket outlet 15 amps on the independent board complete all as specificed and directed.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades & Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specificed and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specificed and directed.

Supply and fix LED tube light fitting of 20 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt complete all as specificed and directed.

Supply and fix LED tube light fitting of 10 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt complete all as specificed and directed.

Supply and fix Switch piano, flush type single pole, one way 5 Amp complete all as specificed and directed.

Supply and fix switch piano, flush type, 6 Amps, SP, two way, all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body, 65 x 50mm, 3 terminals all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 Amps flush type all as specified and directed.

Supply and fix Switch socket combination 6 pin, 6/16 Amps flush type all as specified and directed.

Supply and fix bell push, flush type, 6 Amps, all as specified and directed.

Supply and fix call bell, AC, 230 volts, single pole all as specified and directed.

S & F stepped type electronic fan regulator flush type AC 240 Volts, 5 step all as specified and directed.

M&L for submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 run of 4 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note : 2 Runs of PVC wires of 4 sqmm and 1 run of4 sqmm earth wire and one run conduit will be measured as one unit).

S&F sheet metal enclosure for MCB DB Single pole and neutral 8 ways, 240 volts with 200 Amps rated bus bar, double door all as specified and directed.

S&F MCB SPN 25 to 32 Amps, 220 volts, 10 KA, 'B' Series complete all as specificed and directed.

S&F MCB SP 6 to 32 Amps, 220 volts, 10 KA, 'B' Series complete all as specificed and directed.

S&F sheet metal enclosure for MCB DB Tripple pole and neutral 6 ways, 415 volts with 200 Amps rated bus bar, double door all as specified and directed.

S&F RCCB TPN 63 Amps, 30mA, 415 volts, AC all as specified and directed

M & L for Earthing complete with GI Steel earth plate electrode 600 × 600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers,with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth wire of size 4 mm, dia by means of bolts, nuts, check soldered and revetted to earth plate. Earth wire will be protected by using 40mm dia bore GI pipe light grade. The earthing includes PCC Pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 mtrs etc complete all as shown in electrical plate No. 3 of SSR Part-I 2009,connected to earthing test point all as specified or indicated including testing on completion

M/s Antony Kallarakkal

MS BUILDERS