Construction of building for District Principal Agriculture office at Kalpetta on the 4th floor of Civil Station Block A phase 1 Kalpetta Wayanad - SITC of fire fighting system

Amount

Fire Protection System od206122/2019_2020 : MAIN FIRE PUMP:- Supply Installation, testing and commissioning of Fire fighting Main pump electrical motor driven type rated for 2280 LPM at 50m head high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a squirrel cage induction motor SPDP including supply of all accessories with supply condiion 415V,50Hz, 3 phase floor mounted type rated for 40HP and 2900 RPM including supply of all accessories such as coupling, vibration damping arrangements, coupling guard base frame foundation bolt etc.

od206124/2019_2020 : DIESEL ENGINE DRIVEN PUMP:- Supply Installation, testing and commissioning of Main Diesel Engine driven pump of centrifugal end suction type suitable for automatic operation rated for 2280 LPM at 60m head at 38HP high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a diesel engine water cooled with radiator, Complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required at 1800 RPM including supply of all accessories such as common base plate suitable foundation for engine and pump, vibration damping arrangements, Battery, coolant, lubricating oil, exhaust piping, necessary controls such as pressure switch and interconnecting cable from control panel to Battery etc.

od206126/2019_2020 : Supply,installation,testing and commissioning of Horizontal mounted end suction type electric motor driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller,including all accessories operating on Three phase 50Hz,415V AC supply including foundation,bolts etc.complete. The pump set shall be of 3.73KW / 5 HP

od207907/2019_2020 : Supply and providing cast Iron Foot valve 80mm

od207909/2019_2020 : Supply and providing cast Iron Foot valve 100mm

od206128/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 25mm Dia

od206130/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 32mm Dia

od206132/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 40mm Dia

od206134/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 50mm Dia

od206136/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 65mm Dia

od206138/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 80mm Dia

od206140/2019_2020 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 100mm Dia

od206144/2019_2020 : SPRINKLER BULB :- Supply, installation, testing and commissioning of sprinkler Bulb,20mm dia, 68 degree Celsius Pendent type

od206146/2019_2020 : SPRINKLER BULB :- Supply, installation, testing and commissioning of sprinkler Bulb,20mm dia, 68 degree Celsius Sidewall type

od206148/2019_2020 : Fire Hose :- Supply, installation, testing and commissioning of Re-inforced rubber lined hose conforming to IS: 636, 63mm dia. with ISI mark 15m long and fitted with instantaneous type couplings on both ends, made of Gun metal. (Firex / Newage / CRC / Zenith)

od206150/2019_2020 : Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe

od206152/2019_2020 : Hydrant valve - Supply, installation, testing and commissioning of instances pattern stain less steel single Headed Hydrant valve bearing to IS:5290,63mm oblique type with instantaneous hose coupling adaptor, complete with PVC blank cap single

od206154/2019_2020 : Ball valve-Supply, installation, testing and commissioning of C.I. slim seal type ball valve with required flanges, nuts and bolts gasket etc. complete 25mm dia

od206156/2019_2020 : Non return valve-Supply, installation, testing and commissioning of C.I. slim seal type Non return valve with required flanges, nuts and bolts gasket etc. complete 80mm dia

od206158/2019_2020 : Non return valve-Supply, installation, testing and commissioning of C.I. slim seal type Non return valve with required flanges, nuts and bolts gasket etc. complete 100mm dia

od206160/2019_2020 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 80mm dia

od206162/2019_2020 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 100mm dia

od206164/2019_2020 : Hose cabinet:- Supply and fixing of weather proof Hose cabinet having the size of 750 x 500 x 250mm made of 16 gauge M.S sheet with PCC supports and full front glass door and locking arrangements suitable to accommodate 2 Nos 15m long hose pipes and 1 No. branch pipe. The cabinet shall be painted to scarlet red colour Double

od206166/2019_2020 : Supply, installation, testing and commissioning of Electric Hooter as required

od206168/2019_2020 : Supply, installation, testing and commissioning of manual call point break glass type as per standard specification.

od206170/2019_2020 : Supplying, installing, testing and commissioning of microprocessor based main fire alarm control panel of 12 Zones with visual LCD indications for fire/fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hours normal operation and 15 minute alarm operation. The panel shall be fabricated by MS sheet and powder coated both inside and out side door shall be glass fronted type with locking arrangement as per specification.

od206172/2019_2020 : Supplying, installing, testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc

od206174/2019_2020 : Supply and installation of DCPtype fire extinguisher 5kg capacity consisting of M.S cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc.

od206176/2019_2020 : Supply and installation of ABC type fire extinguisher 5kg capacity consisting of M.S cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc.

od77610/2019_2020 : SITC of Branch Pipe 63mm dia

od77664/2019_2020 : FIRE BRIGADE INLET : Supply, installation, testing and commissioning of 4 way Fire Brigade Inlet connection of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arrangement to be connected to wet riser main.

od77624/2019_2020 : Supply, installation, testing and commissioning of 20mm dia Gun metal Air Release valve

od77626/2019_2020 : Supply and providing pressure gauge in the existing system as required

od77628/2019_2020 : Supply and providing pressure switch wityh IP 32 enclosure protection phosphor bronze bellows as sensing element etc complete

od77640/2019_2020 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector, Twin core shielded low noise cable.

od77644/2019_2020 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required

od77646/2019_2020 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

od77648/2019_2020 : Supply, erection, testing and commissioning of Talk back field device .

od77650/2019_2020 : "PRIMING TANK:- Supply and erection of priming tank of thousand liters of effective storage capacity fabricated out of M.S Sheet including painting etc. as required"

od77652/2019_2020 : Supplying, Installation, Testing & Commissioning of air cushion tank ( air vessel) of continuous welded construction, fabricated out of atleast 8mm thick steel with dished ends, galvanised to IS:4736-1968 and supporting legs, 250mm dia & 1200mm high complete with necessary air release valve, safety valve, pressure gauge, flange connection to the wet riser piping with necessary piping to meet the functional requirement of the system.

od77656/2019_2020 : supply and providing 5Kg ABC Type fire Extinguisher with hose and clamps including fixing it to wall as required.

od64137/2019_2020 : Supply, laying and clamping of 2 core 1.5 sq mm PVC insulated and PVC sheathed armoured copper cable, using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

od64143/2019_2020 : Supply and providing Fire Escape Route size not less than 16'x16' as required

od64144/2019_2020 : Supply and providing Assembly point boards of 3mm PVC foam board size not less than 16'x16' as required

od64145/2019_2020 : Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required

od64148/2019_2020 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure

90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

90.12.7.30 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

od64155/2019_2020 : Supply and providing 25x6mm brass nut and bolt etc. as required.

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

od207895/2019_2020 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. DOL Starter for 40 HP motor

od207897/2019_2020 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. DOL Starter for 5 HP motort

od207899/2019_2020 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 63A Isolator switch disconnector

od207901/2019_2020 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 100A Isolator switch disconnector

od207903/2019_2020 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 125A Isolator switch disconnector

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

od64160/2019_2020 : Supply & fixing the Flush head actuator - Red with legend "STOP" with 1 NO contact

od64161/2019_2020 : supply and fixing Three phase Digital Volt meter to read: V, accuracy class 1

od64163/2019_2020 : supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

od64164/2019_2020 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5Sqmm single run

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

od64166/2019_2020 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

od64167/2019_2020 : Copying charges of Electrical/fire Drawing per A3 sheet additional copies

od86702/2019_2020 : Charges for availing fire NOC - fee for fire department

COCHIN FIRE TECH INDIA PVT. LTD.