C/o GSS School (Girls) at Anni

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinge bright finished of required size with necessary screws.37.5mm thick 2nd class devdar wood including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing M.S. grills of required pattern of M.S. flat 20X5mm and 8mm solid square bars in combination as per detail drawing in wooden / steel frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. 200X10 MM

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. 125MM

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing bright finished brass hard drawn hooks and eyes including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. 250MM

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete 150MM including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Painting with synthetic enamel paint of approved brand, Shade and manufacture to give an even shade :Two or more coats on new work including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, kg railings, brackets, gates and similar works including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.