Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹15.4 L
EMD Value
₹30,849
Closing Date
27 Oct 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE_KCED_PWD
Khadya_Bhawan_11A_Mirza_Ghalib_Street_Block_A_3rd_Floor_Kokata_700087
Construction of office chambers for HMIC and HMOS of MSME and Textiles Department- Electrical Installation Works
2026_WBPWD_5078327_1
WBPWD/EE/70/IR/T/KCED/I of 2026-27
Open Tender
Electrical Work/ Equipment
Item Rate
90 days
Shilpa Sadan
Please refer Tender documents.
4 documents required · 4 mandatory
₹30,849
Yes
Office_of_EE_KCED_PWD
7 Oct 2026
7 Oct 2026
29 Oct 2026
7 Oct 2026
27 Oct 2026
9 Oct 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Disconnecting the power flow through existing electrical arrangements & dismantling charges for the existing old electrical installations like LED lights, Wires and mending goods the damages using co's own tools, tackles and necy. arrangements by 1 No. Semi-Skilled and 2 No. Unskilled labour for 1 Day. | 1 | Job | - | - |
| 2Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (Make: Legrand/L&T/ABB) | |||||
| 2.01 | (i) 4 way (4 + 12), Double door | 1 | Set. | - | - |
| 3Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. (Make: Legrand/L&T/ABB) | |||||
| 3.01 | (i) 125 A,36KA,FPMCCB | 1 | Set. | - | - |
| 4 | Supplying and fixing 415 V, 63 A TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make: Legrand/L&T/ABB) | 4 | Nos. | - | - |
| 5 | Supplying and fixing following 4 way (4+12), Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. S&F four pole, 415 V, 63 A isolator as incomer and 12 Nos. 5 A to 32 A rating, 240 V, Single pole 10 kA, "C" curve, miniature circuit breaker suitable for inductive load as outgoing complete with connections, testing and commissioning etc. as required. (Make: Legrand/L&T/ABB) | 2 | Set. | - | - |
| 6 | Supplying and fixing 12 way, Double door single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. S & F double pole, 240 V, 40 A isolator as incomer, 10 Nos. 5 A to 32 A rating, 240 V, Single pole 10 kA, "C" curve, miniature circuit breaker suitable for inductive load as outgoing complete with connections, testing and commissioning etc. as required. (Make: Legrand/L&T/ABB) | 6 | Set. | - | - |
| 7 | Supplying, installation, Testing & Commissioning of 8 - 10 Watt LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector. (Make: Philips / Crompton/Wipro) | 16 | Nos. | - | - |
| 8 | S & F of 240V, 28 Watt, 5 meter length LED chain light having 72 Nos. LED per meter with LED driver. (Make: Philips Linea Bright (72 LED /Mtr) / Eqv. Crompton/Wipro) | 10 | Sets. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
2911.pdf
Tender Documents • 0.51 MB
BOQ_5178078.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .