NIT NO. 20 ITEM NO. 26

Making and supply of cubical panel for incomer power supply suitable for up to 10 HP pumps load, wall mounting of size 400X 350 X 200 mm (minimum) made out of 16 SWG CRCA sheet, indoor type, duly painted with power coating, complete with following switchgears and instruments duly installed with their complete connection and inter connections with proper cables etc. as per requirement and with cable connectors for making required power supply connections by fixing the 40 Amp ELCB- 1 no 32 amp MCB 4 pole- 1 no, 3 nos indicating LED fittings with 6 amp SP MCBs, 40 amp panel mounting changeover switch. Make:- L&T/C&S/Schneider

Making incoming connections to be incomer panel by connecting the main supply and the panel by the existing cables as per site requirements.

Making the connection from the incomer panel to existing starters/panel for operations of pump by providing and fixing of new copper cables od suitable rating as per site requirement including laying of cable/making end terminations etc. as per requirement.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. DSR E&M 5.6

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut,bolt, spring, washer excavation and re-filling etc. as required. DSR E&M 5.10

Testing and commissioning of the incomer panel at No load and On load as per site requirement.

JMD ASSOCIATES