WELCOME MAINTENANCE AND INTERNAL ELECTRIFICATION TO CERTAIN OFFICERS MD ACCN AT KAILASH OFFICERS ENCLAVE AND OFFICE COMPLEX AREA AT PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Demolition of cement concrete of any description and in any position not otherwise described or specifically provided for complete all as specified & directed.

Demolition of cement concrete as in ground floor and paving n.exc 15cm thick below or above ground level complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified & directed.

M & L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, shelves,chajjas etc and the like complete all as specified & directed.

Use & waste for form work for soffit/ edges of slabs, shelves,chajjas etc. complete all as specified & directed.

M & L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping, benching, cills, seismic and other similar bands and the like including weathering slightly rounded or chamfered angles and throating complete all as specified & directed.

M & L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified & directed.

M & L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in man hole covers, shelves, chajjas etc and similar articles with plain faces, set in CM 1:4 complete all as specified & directed.

M & L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in Sub base of paving/ hardstandings, foundation filling and mass concretes, sub base of floor etc complete all as specified & directed.

M & L for 75mm thick PCC 1:2:4, type B-1, as in pavings/hard standing/path etc finished even & smooth without using extra cement complete all as specified & directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, surfaces finished even and smooth without using extra cement complete all as specified & directed.

M & L PCC 1:2:4 type B-1 (using 20 mm graded agg) for hold fast, pressed steel frame,roof gola etc complete all as specified & directed.

S & F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified & directed.

S & F mild steel TMT bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending, spirally, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified & directed.

Demolition of brick work, PCC Block or stone/boulder masonary built in cement mortar/lime mortar including all quoins, arches, pillars etc complete all as specified & directed.

M & L for precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified & directed.

Taking down shutters of any description exc. 1 Sqm & n.exc 2 Sqm each complete all as specified & directed.

Taking down shutters of any description not exc. 1.00 Sqm each complete all as specified & directed.

Refixing of shutters of any description exc 2 Sqm each in same opening including taking down, easing and adjusting and also refixing builders hardware as required. Note: Cost of Builders Hardware shall be deemed to included in quoted unit rate.

Refixing of shutters of any description exc 1 Sqm but n.exc 2 Sqm each in same opening including taking down, easing and adjusting and also refixing builders hardware as required. Note: Cost of Builders Hardware shall be deemed to included in quoted unit rate.

S & F of second class hard wood (Sal) as in plain, solid , straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified & directed.

S & F 35m thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009).

S & F 30mm thick second class hard wood glazed and skeleton shutters for window/ventilator with sash bars & size of members of shutters as per clause No 8.20 (b) of SSR Part-I (2009).

S & F second class hard wood panelled shutters 35mm thick (three panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail & stile as per IS 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified & directed.

S & F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified & directed.

M& L 19/20 mm thick block boards grade 2 quality interior grade, commercial type fixed with screw to timber frame work as in cup board shutter / shelves/cabinet fixed as in repair.

M & L for decorative laminate of thickness 0.9mm type1 of surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturer's instructions complete all as specified and as directed

M & L for external teak wood leaping, 6mm thick on 19mm thick block boards etc fixed with nails complete all as directed.

S & F 3mm thick pin headed glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed.

M & L for solid PVC door frames of size 50mm X 47mm out of 5mm wood grain printed PVC sheets reinforced with MS Square tube supplying and fixing in openings as per manufacturers instructions.

S & F factory made hollow PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain print PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for tp rail & bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to geter with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S & F mild steel framed work such as grills, grating etc with ends of bars shouldered and/ or riveted, forged into spikes, framed guard bars, railings and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.

S & F mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

Taking down door fittings any type in any position complete all as specified & directed.

S & F mild steel 300 mm size ordinary rat tail rod pattern spring including roller and roller plate (Helical door spring) for door shutter complete all as specified & directed.

S & F in repair mild steel 300 mm size ordinary rat rail rod pattern spring including roller and roller plate (Helical door spring) for door shutter complete including necessary welding etc all as specified & directed.

S & F butt hinges 100mm long medium weight, cold rolled, mild steel complete all as specified & directed.

S & F Butt hinges 75 mm long, medium weight, cold rolled mild steel complete all as specified & directed.

S & F mild steel handles, oval type, 125 mm long complete all as specified & directed.

S & F mild steel handle, oval type, 100 mm long complete all as specified & directed.

S & F mild steel barrel tower bolt, stove enameled black with bright bolt 200 mm long complete all as specified & directed.

S & F mild steel barrel tower bolt, stove enameled black with bright bolt 100 mm long complete all as specified & directed.

S & F 300 mm long mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

S & F continous (piano) hinges mild steel,bright fuinish or electrogalvanised.

S & F aluminium anodized barrel tower bolts 150mm long, of extruded section complete all as specified & directed.

S & F aluminium handles 125 mm long, cast type, anodized complete all as specified & directed.

S & F 250mm Aluminium alloy anodised sliding door bolts with hasp,staple(bolt type)and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or aluminium alloy and fixed.

S & F stainless steel butt hinges, 100 mm size complete all as specified & directed.

S & F double legged door stopper of allluminium alloy with rubber

S & F Aluminium sheet 0.56 mm thick fixed with aluminium alloy screw to door shutter all as spd and directed

S & F in repair Kitchen plate rack of stainless steel of size 720mm x 600mm x 230 mm made out of 1 mm thick steel sheet complete all as specified & directed.

S & F 20/25mm mm dia fancy type Drapery Rod with rubber sleeves including brackets complete, of approved quality and all as directed including taking down existing curtain rod complete all as specified & directed.

S & F 19/20mm dia mild steel curtain rod complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm or over in section in any position and in any situation. (unfrarmed work) complete all as specified & directed.

Dismantling in timber fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section in any position. (unframed work) complete all as specified & directed.

Dismantling mild steel work or structural steel work of any description in any position complete all as specified & directed.

M & L for second class hard as wood in scantlings, clean sawn (SAL) fixed in any position complete all as specified & directed.

M & L for second class hard wood, plain fillets, square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one face or edge, cross sectional area exc. 3 & n.exc 6 Sqcm

S & F mild steel work as in wind tie for roof including securing bolts, hooks etc complete all as specified & directed.

Dismantling wall and ceiling boards, partitions of any description or any position (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed.

S & F GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -38mmx24mmx0.3mm (ii) cross tee of size -28mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm

S & F 4 mm thick AC self designer ceiling board pre-painted of size , 595 X 595 mm size fixed on snap grid as in ceiling complete all as specified and as directed.

M & L for 4mm thick asbestos cement plain building boards as in patches fixed to timber framework as in ceiling fixed with screws complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M & L for non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors/vertical surface, set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed

M & L for non skid joint free ceramic coloured tiles of size 7-8 mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm as in floors/ vertical surface, set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

M & L for 12 to 16mm thick machine cut pre-polished Udaipur green stone slab flooring on cooking platform/window cill,risers,treads laid over and including 15mm thick screed bed or bedding layer in CM 1:6 and jointed with white cement mixed with pigment to match the shade of slab including rubbing and polishing, bull nose edging/moulding complete all as specified & directed.

Material & Labour for glazed joint free coloured ceramic tiles 7 to 8 mm thick in vertical surface as in skirting & dado, area of each tile exceeding 0.06 sqm but not exceeding 0.16 Sqm set & jointed in neat cement slurry & pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for Vitrified coloured tiles (Light Shade) 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm as in floors/vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified & directed

M & L for chequered cement concrete tiles of approved size , set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

S & F Kota stone slab (size note less than 550x550mm) 18-20 mm thick as in floors/risers/treads/skirting/dado etc with 100 mm wide white marble stone strip over and including 15mm screed bed in cement mortar 1:4 cement & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing to achive mirror finish.

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) 25 mm thick for Sub base flooring complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:6, surfaces finished even and fair complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair complete all as specified & directed.

M & L for rendering 10mm thick in cm 1:4 as in ceiling finished even & fair complete all as specified & directed.

M & L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion including primer complete all as specified & directed.

M & L for preparation of old plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified & directed.

M & L for preparation of old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified & directed.

M & L for preparing of old distempered surface of ceiling and applying one coat of distemper oil emulsion complete all as specified.

M & L for preparing plastered or un-plastered new surfaces of walls and applying three coats of white wash complete all as specified & directed.

M & L for complete removal of existing treatment of walls including complete removal of existing treatment and applying two coats of white wash complete all as specified & directed.

M & L for preparing old plastered or un-plastered surfaces of walls and applying one coat of white wash complete all as specified & directed.

M & L for preparing plastered or un-plastered new surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M & L for preparing plastered or un-plasteredold surfaces of ceiling and applying one coat of white wash complete all as specified & directed.

M & L for two coats oil bound distemper on new ceiling surface incl prepration of surface complete all as specified & directed.

M & L for preparation of wall plaster or un plastered new surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed.

M & L for preparation of wall plastered or un plastered old surfaces and applying one coat of cement base paint on walls complete all as specified & directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M & L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for preparation of old or previously untreated steel surface including roof etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparation of old plastered surface of walls and applying one coat of exterior emulsion paint 1st quality (Apex ultima of Asian Paints or equivalent in Berger/Shalimar) paint complete all as specified and directed by Engineer in Charge.Note:- The tint/ shade of the paint shall be as approved by the GE.

M & L for old plastered surfaces by complete removal of existing treatment of wall or preparation of new surfaces and applying a thin layer of Birla/ JK wall putty on wall surfaces including cornices etc to obtain smooth surface to achive cement base paint/ oil bound distemper etc complete all as specified and directed.( cement base paint distemper oil emulsion etc paid separately under respective items)

M & L for Cutting Chases for concealed water tubing,shelves,chajjas,sunshades etc and making good disturbed surfaces, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed.

Taking up or down steel tubing and connections 15 mm bore pipe and removing from site complete all as specified & directed.

Taking up or down steel tubing and connections 20 mm bore pipe and removing from site complete all as specified & directed.

Refixing of 15 mm dia old steel tubing and connections in new or old position (Walls, ceilings, floors etc)

Refixing of 20 mm dia old steel tubing and connections in new or old position (Walls, ceilings, floors etc)

S & F 15 mm bore tubes, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.

S & F 20 mm bore tubes, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.

S & F in repair PVC cabinet mirror size 350mm x 450 mm fixed with steel screws with rowel plug complete all as specified and directed

S & F rotational moulded polyethylene three layered water storage tanks 500 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed.

S & F rotational moulded polyethylene three layered water storage tanks 1000 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed.

S & F (in repair) 15 mm bore fancy type bib taps brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench complete all as specified & directed.

S & F (in repair) 15mm bore pillar taps, brass chromium plated, screwed down high pressure with or without lettered, hot or cold with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified & directed.

S & F (in repair) 15 mm dia chromium plated angle cocks/stop valves, brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union complete all as specified & directed.

S & F (in repairs) 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends complete all as specified & directed.

S & F in repair 20 mm bore PTMT ball valves, high pressure with polyethylene float and fly nuts complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S & F shelf /corner shelf of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 grms)

S & F in repairs bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms)

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S & F (in repairs) vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

S & F (in repair) vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover, jet sprey with faucet and flushing pipe complete all as specified & directed.

S & F (in repairs) PVC low level flushing cistern 10 Litre capacity, symphonic action type, white as approved including ball valve, float valve and handle, flush pipe complete all as specified & directed.

S & F (in repairs) vitreous china wash hand basin, white, size 550 x 400 mm including brackets, chromium placted waste coupling &PVC waste pipe of 32 mm dia complete all as specified & directed.

S & F in repair 450mm long PVC connection, 15 mm bore complete all as specified & directed.

S & F (in repairs) 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/floors with necessary fittings complete all as specified & directed.

S & F in repair PVC (SWR) bends 110 mm bore complete all as specified & directed.

S & F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors etc complete all as specified & directed.

S & F in repair 75 mm bore PVC (SWR) bends complete all as specified & directed.

S & F in repairs stainless steel sink with draining board, made out of 1mm thick steel sheet for kitchen with waste pipe, CI cantilever brackets, connecting union overall size 915 x 460mm with bowl size 410 x 330 x 160mm complete all as specified & directed.

S & F in repair waste fitting 32mm dia brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed all as spd & directed

S & F in repair PVC waste pipe 32mm dia 600 to 750mm long fixed to waste fitting of wash basin incl socket suitable for waste fitting all as spd & directed

S & F in repair centre hole basin mixture 15mm dia chromium plated high pressure all as spd & directed.

S & F in repair chromium plated wall mixture (without telephonic) shower complete all as specified & directed.

S & F in repair water jet for EWC chromium plated with PVC connection complete all as specified & directed.

S & F in repair C P Brass hand shower (health faucet) 1 mtr PVC tube with wall hook compelte for EWC .

S & F in repair brass chromium plated toilet paper holder complete all as specified & directed.

S & F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S & F (in repair) brass chromium plated shower rose 125mm size complete all as specified & directed.

S & F (in repairs) PVC bib taps, 15 mm bore, standard of PTMT any colour high pressure, screwed for iron pipe and fixed including flench.. (Minimum weight 15 mm bore - 90 gms) Make- Prayag or equivalent as approved by GE complete all as specified & directed.

S & F (in repairs) PVC pillar taps, 15 mm bore of PTMT any colour high pressure screwed for iron pipe including flench (Minimum weight 15 mm bore - 110 gms) Make- Prayag or equivalent as approved by GE complete all as specified & directed.

S & F (in repair) CP brass soap dish complete all as specified & directed.

S & F (in repairs) chromium plated Gratings 125 mm size complete all as specified & directed.

S & F (in repairs) PVC floor trap 75 mm bore including jointing to waste pipe in cement mortar complete all as specified & directed.

S & F in repair CP towel rail 600 mm long as a approved quality complete all as specified & directed

S & F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified & directed

Dismantling of cast iron or reinforced concrete drain pipe 100/75 mm bore jointed in cement mortar and taking out of trenches required including all connected fittings.

S & F cast-iron soil waste and vent pipe 100mm bore in any length with or without ears with led joint laid in trenches or in floor/wall.

M & L CI 100mm dia bend all as specified.

M & L 50 mm dia PVC pipe all as specified and directed.

M & L 50 mm dia PVC bend all as specified and directed.

M & L for reflecting sheet glass in repair, 5 mm thick, tinted in squares exc. 0.5 sqm each supplied & fixed to aluminium door/window frames including rubber packing etc. supplied & fixed complete all as specified & directed.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (Note : Glass pane measured and paid for separately under respective item)

M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and directed

S & F Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws

M & L for French polish to achieve required finish complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed.

M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm including removal of existing treatment ,complete all as specified and as directed .

Supply only water proofing compound ,complete all as specified and as directed

M&L PCC 1:7:12 ,type F2 (using 40mm graded crushed stone sggregate ) in foundation filling and mass concrete (as in sunken floor ) with spout pipe 50mm dia up to 600mm long or as per site requirement and including All demolition and removal of existing surface complete all as specified and directed .

S&F Doctor fixit Pidilite 2K high performance 2 componet flexible Acrylic Polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1:5:1 by volume product of M/S Pidilite Industry Limited Makeres of Fevicol adhesive brand .

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges , lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6., complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads / oil putty in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/height including hacking out old broken glass (any thickness)complete all as specified & directed.

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads / oil putty in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/height complete all as specified & directed.

Disconnecting existing over head water storage tanks of capacity exc 250 ltrs but n.exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and removing all scale and dirt etc from tank and from mouth of circulating pipes etc and hoisting if required reconnecting and re-fixing in position complete including embossing date of completion of cleaning by stencil with paint all as specified and directed.

Disconnecting existing over head water storage tanks of capacity exc 500 Ltrs but n.exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and removing all scale and dirt etc from tank and from mouth of circulating pipes etc and hoisting if required reconnecting and re-fixing in position complete including embossing date of completion of cleaning by stencil with paint all as specified and directed.

S & F in repair PVC water tank cover 500 Ltr capacity including tying of tank cover with tank complete all as specified and directed

M & L for preparation of old plastered surface of walls and applying one coat of plastic emulsion paint 1st quality complete all as specified and directed. Note:- The tint/ shade of the paint shall be as approved by the GE.

M & L for 2mm thick a layer of wall putty on ceiling surfaces including cornices etc to obtain smooth surfaces complete all as specified and directed.

S & F (in repair) 15mm bore fancy type bib taps(Long body) brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench complete all as specified & directed.

S & F (in repair) 15mm bore fancy type chromium plated angle cocks / stop valves (two way) brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union complete all as specified & directed.

S & F (in repair) 15mm bore fancy type bib taps(Two way) brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:6, surfaces finished even and fair including taking down of old plaster complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair including taking down of old plaster complete all as specified & directed.

M & L for 10 mm thick rendering in ceiling in CM 1:4, surfaces finished even and fair including taking down of old plaster complete all as specified & directed.

Taking down carefully Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down Sub main wire including with GI wire earth wire of any size, fixed in any position, complete all as specified and directed.

M&L for point wiring Surface type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non metallic PVC surface conduit 20 mm or higher dia, ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with screws, cup washers complete all as specified and directed for the following :-

(a) One light point/ fan/ exhaust fan point/bell point controlled by one, one way switch of 5/6 Amps.

(b)one socket outlet three pin 5 amps control by one switch on the same board

(c)one socket outlet three pin 5 amps control by one switch on independent board

(d) One light point controlled by two, two way switch of 5/6 amps

All as per Item No 176 above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

M&L for point wiring Concealed type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic exhusting PVC concealed conduit 20 mm or higher dia, heavy grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly ,screwed, cup washers complete all as specified and directed for the following :-

(a) One light point/ fan/ exhaust fan point/bell point controlled by one, one way switch of 5/6 Amps.

(b)one socket outlet three pin 5 amps control by one switch on the same board

(c)one socket outlet three pin 5 amps control by one switch on independent board

(d) One light point controlled by two, two way switch of 5/6 amps

All as per Item No 178 above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

Supply and Fix Switch piano, flush type, white finish, 5/6 amps, single pole, one way complete all as specified and directed.

Supply and Fix Socket outlet 5 pin, 5/6 amps and flush type, non shutters, non inter locking type, complete all as specified and directed.

Supply and Fix Switch piano, flush type, white finish, 5/6 amps, single pole, two way complete all as specified and directed.

Supply and Fix Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

Supply and Fix Socket outlet 2 in 1, 5/6 pin, 5 and 15 amp flush type, complete all as specified and directed.

Supply and Fix in repair of bell push AC SP 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed.

Supply and Fix in repair of bell electric Ding Dong/Multi music type, AC, SP 240 volts, complete as all specified and directed.

Supply and Fix in repair Switch piano, flush type, white finish, 5/6 amps, 230 volt grade single pole, one way complete all as specified and directed.

Supply and Fix in repair Switch piano flush type, white finish, 15/16 amps, single pole, 230 volt grade single pole, one way complete all as specified and directed.

Supply and Fix in repair Socket outlet 5 pin, 5/6 amps flush type, non shutters, non inter locking type, complete all as specified and directed.

Supply and Fix in repair Socket outlet two in one 2 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

S&F in repair Electronic fan regulator flush type, 300 W Step type, 230 volts ISI marked. icomplete all as specified and directed.Make: Anchor/Havells/crompton

Supply and Fix ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amp all as specified and directed.

Supply and Fix in repair MCB DB sheet metal enclosure TPN, 4 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fix in repair MCB DB sheet metal enclosure , SPN, 8 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fix in repair MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fix in repair MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix in repair MCB single pole & Neutral 240 volts, 6-32 amps, of 10 KA complete all as specified and directed.

Supply and Fix in repair MCB Triple pole & Neutral 240 volts, 63 amps, of 10 KA

Supply and Fix in repair MCB Triple pole & Neutral 240 volts, 100 amps, of 10 KA

Supply and Fix in repair of 1x20 watt LED security light fitting , pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with two core copper flexible wire of 0.50 Sqmm complete and including taking down old fitting all as specified and directed.

S&F in repair recess mounting LED 2x2 luminaire 34W, slim ceiling light with extruded aluminium housing and milky diffuser complete and including taking down old fitting all as specified and directed.

S&F in repair LED bulk head 10 Watt with PDC aluminium housing and milky diffuser complete and including taking down old fitting all as specified and directed.

Supply and fix in repair of LED Integrated Batten T5 box type surface mouted, (1x18 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and fix in repair of LED Integrated Batten T5 box type surface mouted, (1x9 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and Fix in replacement of LED Linner & compact 9W mirror lightwith decorative grey end caps,polycarbonate body and ribbed opal diffuser,9W 6000K complete all as specified and directed.

M & L for earthing in replacemnet, complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 5 of MES schedule 1991 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 dully reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

Supply & fixing in repair 1100 volts grade heavy duty cable with PVC insulated aluminiuum conductor served with an inner sheating of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire one twin core 10sq mm solid conductor complete all as specified and directed.

Supply and laying in repair XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed by Engr-in-Charge.

Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed by Engr-in-Charge.

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection incliding levellling and consodilation complete all as specified and directed by EIC.

M&L for laying well burnt bricks,as in protection of cable laid dry, flat aboutting each other wide wise all as directed by Engineer-in-Charge.

M & L in replacement for GI tubing 40 mm dia light grade for cable protection complete all as specified and directed.

Material & Labour for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase,Black For Neutral & Green For Earth concealed in wall and drawn including PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

Material & Labour for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x4 Sqmm, of code Red for Phase,Black For Neutral & Green For Earth concealed in wall and drawn including PVC conduit along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

M & L for repair of PVC / metalic exhaust fan AC single phase 230/240V of size 250/300 mm sweep with rewinding super enameled copper winding wire of suitable size and proving with suitable insulation including repalcement of wornout nut bolt washer blade split pin etc reassembling and testing on completion and refix in position complete all as specified and directed

SANJEEV ENTERPRISES

SHAHJEE FRIDGE SERVICE

DIKSHA CONSTRUCTION CO