CA NO. CWE/AMB/NORTH-41 OF 2024-25 REPAIR/REPLACEMENT OF KITCHEN CABINETS, ACCESSORIES AND CONNECTED BLDG WORKS IN CERTAIN OFFR MD ACCN IN AGE B/R-I AREA UNDER GE (NORTH) AMBALA CANTT

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises including removal of debries to distance exc 250mtr nexc 500 mtr in low lying area as directed complete all as specified and directed.

M&L for non–skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tiles exe 0.11 sqm but n exe 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 600 x 7 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) and removal of debries to distance exc 250 mtr but n exc 500 mtr in low lying area as directed complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B–0 (using 12.5mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for granite (of any type) tiles 15–16mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15 mm thick screed bed in CM 1:4 including cutting 25mm dia holes for gas pipe including dismantling of old finishes any type complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 including demolition of brickwork and removal of material to distance exc 250 mtr and n exc 500 mtr complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plaster surface on walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L complete removal of existing treatment on ceiling etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of white wash complete all as specified and directed.

M&L for RCC (Nominal Mix) type B–0, 1:2:4 (12.5mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, chajja, balconies, canopies, deck slabs and in shelves and the like including demolition of concrete in any position, cutting reinforcementand removal of material to distance exc 250 mtr and n exc 500 mtr complete all as specified and directed.

M&L TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, shelves & chajja and similar work n exc 200mm thick, rough finished flat surfaces of concrete complete all as specified and directed.

Cutting chases in making good to facing where required and pointing in cement mortar 1:3 to end of edges or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tuning or consealed conduit wiring, etc and making good cutting exceeding 20cm girth in brick walls complete all as specified and directed.

S&F for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down old GI tubing complete all as specified and directed.

S&F in replacement 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as complete all as specified and directed.

S&F in replacement 15mm bore bib taps cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in replacement PVC connections 15 mm size with PTMT nuts of length 450 mm as complete all as specified and directed.

S&F in replacement brass CP sink mixer swan neck type for mixing hot & cold water for 15mm bore dia, pipes, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in replacement sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm with 32/40mm bore waste coupling and 32mm bore pvc corrugated pipe 900mm long complete all as specified and directed.

Supply and fixing in replacement of 75mm dia uPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls including dismantling of old pipe as existing and removal from site complete all as specified and directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

S&F in repair 75mm bore PVC (SWR) bend complete all as specified and directed.

S&F in repair 75 mm PVC floor trap with grating incl jointing to waste pipe incl fixed in cement concrete type B–1 (1:2:4) complete all as specified and directed.

S&F continuous (piano) hinges, width of flaps 30mm (when open) mild steel bright finish or electro galvanished complete all as specified and directed.

S&F 100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with brass screws complete all as specified and directed.

S&F in replacement stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of grade SS304 of size 36"x31"x10" including screws and fixing arrangementscomplete all as specified and directed.

S&F for stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.

S&F for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.

S&F for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.

S&F for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ.

S&F for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.

Material and labour for 18 mm thick HDHMR board coloured prelaminated one side and other side plain (density over 850Kg/Cum, fixed with screws for kitchen cupboard and cabinet, shelves for cupboard, frame with door if required including 1mm thick pvc patti on cut edge of boards complete all as specified and directed. Make :- Action Tesa, Century ply, Greenply

S&F magnet catcher fixed in cabinet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed.

Note:- Amount of credit of Rs. 36676.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S M S BUILDER AND CONTRACTORS (BID ID -3184810)

dhingra builders (BID ID -3190363)

Ashwani Kumar (BID ID -3182900)