REPAIR/MAINTENANCE OF STREET LIGHT, SECURITY LIGHT, LAMP POST AND CONNECTED WORKS AND REPAIR REPLACEMENT OF INTERNAL ELECTRIC FITTINGS FIXTURES, GEYSERS, SUMMER APPLIANCES AND CONNECTED WORKS UNDER AGE B/R ALWAYE

Amount

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for laying cables and for foundation of pole not exceeding 10 Sqm in plan and not exceeding 1.5 metre depth and getting out in soft/loose soil complete all specified and directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm complete all specified and directed.

Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all specified and directed.

Supply and spread Locally available River Sand for cushioning and covering of UG cables in trenches complete all specified and directed. (Note : For measurement purpose only punned thickness shall be measured and paid)

Supply and laying reinforced precast concrete cable cover, Class LV, Type 1, flat, of size 250mmx150mmx40mm complete all as specified and directed

Material & Labour for Brick well burnt Class 'B' of size 23X11.5X7.5 cm as in cover to UG cable, laid dry, flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over UG cable for cable protection in trenches complete all as specified.

Supply and Lay UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated, screened, PVC bedded, steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 50 Sqmm with suitable cable gland including taking down of old unserviceable cable complete all as specified and directed.

Ditto All as per Sl Item No 7, but aluminium conductor of size 4 core 25 Sqmm.

Ditto All as per Sl Item No 7, but aluminium conductor of size 4 core 16 Sqmm.

Ditto All as per Sl Item No 7, but aluminium conductor of size 4 core 10 Sqmm.

Supply and fix 3 core flexible Aluminium cable 4 Sqmm from cable junction box to street light fitting with and including ERW Steel conduit of 20 mm dia with clamps, nuts, bolts etc complete all as directed.

Material & Labour for GI tubing of size 50mm dia light grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing or used in pole for installation of LED Lantern including clamps, nut bolt etc complete all as specified and directed.

Ditto All as per Sl Item No 12, but GI tubing of size 40mm dia light grade.

Supply and fix outdoor type, weather proof, thermoplastic polycarbonate cable junction box of size not less than 205 x 255 x 112mm, IP-67/69 in accordance with IEC60529, with 5 pole terminal suitable to terminate upto 25 sqmm 4 core and 2 core cables with metric knockouts on side walls including dismantling old one complete all as specified and directed.

Ditto as per item No 14 but of size not less than 155 x 210 x 92 mm.

Supply & Fix in repair MCB SPN 6 to 32 Amps, 220 volts, 10 KA, 'C' Series including dismantling old one complete all directed.

Supply & Fix street lights 90 watt, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection, Efficacy ≥ 120 Lumen per Watt with 10KV SPD including dismantling old one complete all as directed.

Ditto as per item No 17 but of 60 watt

Ditto as per item No 17 but of 45 watt

Ditto as per item No 17 but of 30 watt

Material and Labour for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for erecting of pole, repair of road cuttings etc all as specified and directed by Engineer-in-Charge

Supply & Fix GI Bracket 40mm dia made out of medium grade pipe of 1.2 metre length in bending 120 degrees shape including clamp of flat iron with nut bolts washers including taking down old unserviceable bracket complete all as specified and directed.

Supply & Fix 10 watt IP 65 Rated pyramid tripod type LED bollard with soft 360 degree light distribution including fixing arrangement including dismantling old one complete all as specified and directed.

Supply and fixing 25 Watt new generation, Post-Top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, Spun aluminium landscape luminaries with high power (SMD) LED as lighting source with IP65 Protection including dismantling old one complete all as specified and directed.

Supply & Fix new generation energy saving environment friendly, long life LED Flood light 150 watt made up of pressure die cast aluminium housing with high power LEDs and secondary lenses with IP 66 protection, System efficacy > 110 Lumen per Watt with 10kv built in surge protection device including dismantling old one complete all as specified and directed.

Supply and fix new generation, 10 Watt sturdy LED Bollard of 1 metre height with excellent light output through its PMMA window, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, landscape luminaries with high power LED as lighting source with IP65 Protection, fixed to ground by means of 4 Nos M10 Bolts including dismantling old one complete all as specified and directed.

Supply and fix 25 watt all in one solar LED Street light fitting with inbuilt lithium battery , mono crystalline solar panel of 45Wp, Efficacy of 120 Lumen/watt, MPPT + AC-DC LED driver, 30 AH lithium Ferro phosphate (LifeP04) Battery, 2 days backup, hybrid with 10kv -5ka SPD Operating voltage 180 to 230 Volt, PIR Motion sensor (Active PIR light glows to 100% for 30 seconds upon motion detection returns to 30% after that) suitable for mounting on pole including dismantling old one complete all as specified and directed.

Supply & Fix 20 watt all in one solar LED Street light fitting with inbuilt lithium battery ,mono crystalline solar panel of 40Wp, Efficacy of 120 Lumen/watt, MPPT + AC-DC LED driver, 12.8v/24 AH lithium Ferro phosphate (LifeP04) Battery, 2 days backup, hybrid with 10kv -5ka SPD Operating voltage 180 to 230 Volt, PIR Motion sensor (Active PIR light glows to 100% for 30 seconds upon motion detection returns to 30% after that) suitable for mounting on pole including dismantling old one complete all as specified and directed.

Supply & Fix 60 watt all in one solar LED Street light fitting with inbuilt lithium battery , mono crystalline solar panel of 90Wp, Efficacy of 120 Lumen/watt, MPPT + AC-DC LED driver, 12.8v/42 AH lithium ferro phosphate (LifeP04) Battery, 2 days backup, hybrid with 10kv -5ka SPD Operating voltage 180 to 230 Volt, PIR Motion sensor (Active PIR light glows to 100% for 30 seconds upon motion detection returns to 30% after that) suitable for mounting on pole including dismantling old one complete all as specified and directed.

Supply & Fix surge protection device 10 KV as per existing one as directed by Engineer In Charge.

Supply & Fix LED Street light driver 30 watt to 100 watt as per existing one as directed by Engineer In Charge.

Supply & Fix hot dipped GI Octagonal pole of 6 metres long with single arm, complete arrangement suitable for mounting of LED Street light fitting, with bottom dia 130mm, top dia 70mm with 3mm sheet thickness with and foundation nut, bolts complete including necessary earthwork excavation and PCC as per OEM Drawings including dismantling old one complete all as specified and directed

Ditto as per item No 32 but of size 5 metres.

Material and Labour for decorative swaged pole with bottom dia 114mm, top dia 60mm with height swaged at 2500 mm with total length 5.5 metres, die cast base of dia 340mm, decorative casting rings with arm and fixing arrangement including erection of pole, nut, bolts etc including dismantling old one complete all as specified and directed.

Supply and fix 60 watt new generation decorative street light, downwards having 360 degree beam angle, energy saving and environmental friendly long life aesthetically designed with symmetrical light distribution, with IP66 Protection along with tight fixture with inbuilt 5kv surge protection, including dismantling old one complete all as specified and directed.

Supply and fixing 35 Watt new generation, modern look, Post-Top, long life aesthetically designed with symmetrical light distribution, with high power LED as lighting source with IP66 Protection perfect synchronization with functionality and aesthetics including dismantling old one complete all as specified and as directed.

Supply and fixing 45 Watt Circular LED Post-Top, Offering excellent uniform illumination and aesthetics in one go, Made up of Die cast aluminium body landscape luminaries with high power LED as lighting source unique ring shape LED Engine ensuring soothing, glare free light distribution with IP66 Protection including dismantling old one complete all as specified and as directed.

Material & Labour for aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish compactable for all post top range, Window- plasma cut and duly chamfered opening window of 300x110mm for terminal connections and mounting accessories, Window cover is fitted with allen screws to the pole, Decorative sleek casting ring to increase aesthetical appeal of 3.5 metre including erecting of pole and fixing arrangement including dismantling old one complete all as specified and directed.

Supply and fix new generation energy saving and environmental friendly long life LED high bay light 150 watt in PDC housing suitable for industrial application, Lumen efficiency not less than 140 lumen/watt and upto150 lumen/Watt with IP-66 Protection including fixing arrangements Hanging chains etc, including dismantling old one complete all as specified and directed.

Supply and Fix In repair energy saving and environmental friendly new generation, decorative IP 66 LED Spike light 15 watt including dismantling old one complete all as directed

Attending internal/External electric complaints for maintenance/breakdown round the clock for maintenance, checking, fault finding and rectification of fault in LT Panels overhead HT/LT Lines, HT/LT underground cables, Transformers, Switchgears internal electric faults, fans etc including internal/External water supply complaints and carry out repairs and resume electric supply and water supply complete all as specified and directed by Engineer in Charge. Notes: - (a) Day to day complaint rectified by the electrician shall be written in complaint register and complaint document slip, rectified complaints only shall be measured and paid. Complaint attender shall have minimum qualification of ITI Electrician cum plumber having 3 years experience of same nature of work is to be employed. (b) The spares required for rectification of faults shall be measured under relevant items. (c) All necessary tools shall be made available with the technician while executing the complaint. (d) All consumables other than mentioned in schedules are deemed to be included in the rate quoted. (e) All kind of transport for the complaint attender/materials and mobile/cell charges are deemed to be included in the rate quoted. (f) All safety aspects are to be taken and if any accident/hazardous incidents happen during execution shall be the sole responsibility of the contractor. (g) Penalty of Rs 2000.00/complaint will be recovered from contractor if the complaint is not rectified within 24 hours.

Supply only Switch piano, flush type single pole, one way 6 Amps.

Supply only Switch piano, flush type single pole, two ways 6 Amps.

Supply only Bell push, flush type, 5 Amp.

Supply only Socket Outlet flush type, 6 Amps.

Supply only Switch socket combination 2 in 1, 6 Amps flush type.

Supply only Switch socket combination 6A/16A, 5 in 1.

Supply only plug top 3 pin 16 Amps, 240 volts, bakelite body.

Supply only Bell, AC, 230 volts, single pole.

Supply only stepped type electronic fan regulator flush type, hum proof, AC 240 Volt, 5 Step two modules.

Supply only stepped type electronic fan regulator (dimmer) flush type, hum proof, AC 240 Volt, single module.

Supply only lamp holder, pin type, insulated body with back plate suitable for batten fittings AC, 240 Volt.

Supply only LED tube light fitting of 20 watt, 230 Volt, with Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt.

Supply only LED tube light fitting of 10 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 100 lumen/watt.

Supply only LED Tube lamp suitable for 4 feet, 18/20 watt.

Supply only CIMFR Certified flameproof LED batten fittings suitable for twin T8 tube of 20 watt, Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected.

Supply only CIMFR Certified flameproof LED batten fittings suitable for single T8 tube of 20 watt, Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected.

Supply only CIMFR Certified flameproof LED fittings 60 watt well glass in die cast aluminium housing heat resistant toughened glass, Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected.

Supply only Modular switch 1 way 6A,1 module.

Supply only Modular switch 2 way 6A,1 module.

Supply only Modular Bell push 6A 1 module.

Supply only Modular Socket, 6A - 2/3 pin combined 2 module.

Supply only Modular Socket 6A/16A - 2/3 pin combined 2 module.

Supply only Modular Fan step regulator, 120W - 2 module.

Supply only Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth.

Supply only Switch flame proof rotary type with termination box in LM6, 16A, single pole 250 Volt.

Supply only MCB SP 6 to 32 Amps, 220 volts, 10 KA, 'C' Series.

Supply only MCB SPN 25 to 32 Amps, 220 volts, 10 KA, 'C' Series.

Supply only MCB TPN 63 Amps, 415 volts, 10 KA, 'C' Series.

Supply only RCCB Double pole, 30mA, 25A.

Supply only RCCB 4 pole, 30mA, 63A.

Supply only LED 2 x 2 feet fitting, 36 Watt, 230Volt,with CRCA Powder coated housing and high quality PC Diffuser, efficacy of 120 Lumen/watt , THD <10,L70 B50, , PF >0.95, with separate driver module , complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply only LED down lighter of 10/12 watt, 230 Volt with PC Housing & Opal PC Diffuser with independent electronic LED driver easy to install.

Supply only LED down lighter of 12 watt, 230 Volt Sleek surface mounted pressure die cast aluminium luminaries in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver easy to install.

Supply only capacitor 2.5/3.15/4 MFD, 240 volts, AC suitable for fans.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as directed.

Material & Labour for One light point wiring on surface/ceiling/Trusses/concealed controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sqmm size drawn through and including PVC conduit of suitable size and all accessories, fire resistant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminated hylem sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 Sqmm as earth continuity conductor and making good the disturbed surfaces of walls/floors/ceiling etc, all as specified and directed.

Ditto as per item No 77 but One ceiling fan point controlled by one switch.

Ditto as per item No 77 but One Exhaust fan point controlled by one switch.

Ditto as per item No 77 but One 3 pin socket outlet 5 amps on the independent board.

Ditto as per item No 77 but One 3 pin socket outlet 5 amps on the same board with other switches.

Ditto as per item No 77 but One bell/buzzer point controlled by one push button on the same board with other switches or independent.

Ditto as per item No 77 but for One light point controlled by two 2-way switches, with cables 1.5 Sqmm size.

Ditto as per item No 77 but with cable 2.5 Sqmm for One 3/5 pin socket outlet 15 Amps on the independent board.

Material & Labour for One light point wiring on surface/ceiling/Trusses/concealed controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 Sqmm size drawn through and including stove enameled steel conduit of suitable size and all accessories, fire resistant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminated hylem sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 Sqmm as earth continuity conductor and making good the disturbed surfaces of walls/floors/ceiling etc complete all as specified and directed.

Ditto as per item No 85 but with cable 4 Sqmm for One 3/5 pin socket outlet 15 amps on the independent board complete all as specified and directed.

Supply and fix in repairs Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed.

Supply and fix in repairs Switch flame proof rotary type with termination box in LM6, 16Amps, single pole 250 Volt complete all as specified and directed.

Supply and fix in repairs Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

Supply and fix in repair Switch piano, flush type single pole, two way 5 Amp complete all as specified and directed.

Supply and fix in repair Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix in repair Switch socket combination 2 in 1, 6 A flush type complete all as specified and directed.

Supply and fix in repair Switch socket combination 6A/16A, 5 in 1 flush type complete all as specified and directed.

Supply and fix in repair Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fix in repair Bell, AC, 230 volts, single pole complete all as specified and directed.

Supply and fix in repair stepped type electronic fan regulator flush type, hum proof, AC 240 Volt, 5 Step complete all as specified and directed.

Supply and fix in repair LED tube light fitting of 20 watt, 230 Volt, with Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt complete all as specified and directed.

Supply and fix in repair LED tube light fitting of 10 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 100 lumen/watt complete all as specified and directed.

Supply and fix in repair CIMFR Certified flameproof LED batten fitting suitable for twin T8 tube of 20 watt. Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected complete all as specified and directed.

Material & Labour for sub main wiring with 4 runs of single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked along with 2 runs of 4 Sqmm multistranded insulated copper conductor cable as earth continuity conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note: 6 Runs of PVC wires of 4 Sqmm and one run conduit will be measured as one unit.

Material & Labour for sub main wiring with 2 runs of single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked along with 1 runs of 4 Sqmm multistranded insulated copper conductor cable as earth continuity conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note: 3 Runs of PVC wires of 4 Sqmm one run conduit will be measured as one unit.

Material & Labour for sub main wiring with 2 runs of single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked along with 1 runs of 4 Sqmm multistranded insulated copper conductor cable as earth continuity conductor drawn through and including ERW Steel conduit of suitable size on surface/ recessed as required. Note: 3 Runs of PVC wires of 4 Sqmm one run conduit will be measured as one unit.

Supply & Fix in repair sheet metal enclosure for MCB DB TPN 4 ways, 415 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Supply & Fix in repair sheet metal enclosure for MCB DB SPN 4 ways, 240 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Ditto as per item No 104, but for DB SPN 8 ways.

Ditto as per item No 104, but for DB SPN 12 ways.

Supply & Fix in repair thermoplastic polycarbonate Energy meter enclosures with hinged lid and plane side walls - environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anticorrosive, degree of Ingress Protection IP-65 in accordance with IEC 60529, gasket material of enclosure is Polyurethane; while the gasket is internally embedded for single phase one meter of size 600 x 300 x 170 mm complete all as specified and directed.

Ditto all as per item No 107 but of size 600 x 600 x 170 mm.

Taking down and re-fixing of electric energy meter single phase including all fixing accessories complete all as specified and directed.

Supply and fix MCB SP and current carrying capacity 5 to 32 Amps, 240Volt, 10 KA 'B' curve in the MCB DB complete all as specified and directed.

Supply and fix MCB SPN and current carrying capacity 32 Amps, 240Volt, 10 KA 'C' curve in the MCB DB complete all as specified and directed.

Supply and fix MCB TPN and current carrying capacity 40 to 100 Amps, 415Volt, 10 KA 'B' curve in the MCB DB complete all as specified and directed.

Supply and fix in repairs RCCB, double pole, 25A, 30mA complete all as specified and directed.

Supply and fix in repairs RCCB, four pole, 63A, 30mA complete all as specified and directed.

Supply and fix in repairs SPN sheet metal enclosure with a two pin and earth plug and socket complete with one MCB SP 10 Amps, and connecting complete, all as specified and directed.

Supply and fix in repairs TPN sheet metal enclosure with a three pin and earth plug and socket complete with one MCB TP 63 Amps, and connecting complete, all as specified and directed.

Material and labour for Earthing with galvanised MS earth plate of size 600 x 600 x 6 mm thick buried directly in ground not less than 2.25 metre below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth lead wire of 4 mm thick, soldered and riveted to earth plate. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20 mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 metre etc complete all as specified and shown in electrical plate No 3 of SSR Part I - 2009. Note: - Main earthing lead from earth plate to test point & up to 7.5 metre to be provided. The cost for the same shall be deemed to be included in the above quoted rate.

Disconnecting and taking down fans, any size, any make, from various satellite area locations, for repair /painting / replacement of defective parts and re-hanging/re-fixing in its original location after reconditioning, complete as specified and directed for Ceiling Fan 1200mm/1400 mm Sweep, Wall fan upto 450 mm and exhaust fan upto 450 mm sweep complete all as specified and directed. Note: - Items for reconditioning will be measured and paid separately.

Material and labour for Painting of ceiling fans of any size in situ with synthetic enamel paint one coat after cleaning all dust by spraying including filling cavities with filler etc, complete as specified & directed.

Ditto as per item No 119 But for Wall Fan/Exhaust fan upto 450mm Sweep.

Material and labour for removing the burnt out winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, varnishing, drying etc, replacement of body screws, testing and commissioning on full load for 8 hours continuous running, for Ceiling Fan 1200mm/1400mm Sweep complete all as specified and directed. Note: - Items for reconditioning will be measured and paid separately.

Ditto as per item No 121 But for Wall Fan/Exhaust fan/Pedestal fan upto 450mm Sweep.

Supply and Fix in repair Capacitor 2.5/3.15/4 MFD, 240V, AC suitable for fans, all as specified and directed.

Supply and replace ball bearing made out of high carbon steel, as per existing, suitable for any type, any make, any size fan, complete all as specified and directed.

Supply and replace bush bearing, made out of brass alloy, as per existing, suitable for any type, any make, any size of cieling fan, complete all as specified and directed.

Material & Labour for Anti suicide fan rod with two parts upper and lower which are held together with the help of a spring mechanism. It will separate on applying excess load and load gets transferred on the spring which expands, made of GI Tubing 20 mm bore medium grade as required at site suitable for Ceiling fan of size 1200mm/1400mm sweep including nut, bolt, split pin made out of nickel plated mild steel with rubber reel insulator including dismantling old one complete all as specified and directed.

Supply and replace 1100 Volts grade PVC flexible twisted twin core cable with multistranded copper conductor of size 23/0.0076, complete all as specified and directed.

Taking down defective Geyser of capacity 25/ 50 litres of any make from its existing position after disconnecting inlet/outlet water connection and opening of geyser for checking and repairing the defective parts including testing the same after repairing re-fixing the same on its existing position and making all connection complete all as specified and directed.

Supply and replace Heating element any type for 1.5KW/2KW capacity, 240V, AC, with heat resistant rubber washer complete, all as specified and directed.

Supply and replace indicator lamp round/rectangular type, standard quality AC, SP, 230 V suitable for 25/50 liters capacity geysers any type, 240 volts, AC red or green complete, all as specified and directed.

Supply and replace fusible plug with internal or external threading suitable for geysers of capacity 25/50 liters, all as specified and directed.

Supply and replace non-return valve, made out of brass 15mm bore, all as specified and directed.

Material & Labour for Painting of geysers complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc, complete all as specified and directed.

Material and labour for making 4 Nos of holes in wall, grouting 4 Nos rag bolts of size 125mm long x 12mm dia with PCC including necessary nuts and washers for 25/50 Litres capacities of geyser on wall complete all as specified and directed.

Supply and replace inner assembly made out of brass with chromium plating, suitable for any type of Geysers for 25/50 Litres capacities all as specified and directed.

Material and labour for filling the glass wool between outer cover and inner tank of Geysers, 50/25 litres capacity, horizontal/vertical, including removing the old one complete all as specified and directed.

Supply and fix metallic outer cover including bottom and top cover duly spray painted with two coats of synthetic enamel paint over a coat of red oxide chromate primer, suitable for any type of geyser for 25/50 Litres capacities complete all as specified and directed.

Supply and replace inner tank made out of copper alloy, suitable for any type of geyser, for 25/50 Litres capacities complete all as specified and directed.

Material and labour for repairs to metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, for any type of geyser for 25/50 Litres capacities complete all as specified and directed.

Supply and replace pressure / air release valve suitable to fix in inlet of geyser, made out of brass 15mm bore complete all as specified and directed.

Material & Labour for disconnecting from position, servicing at same location including cleaning of interior parts and body with solvent materials, replacement of unserviceable spares / parts if required, necessary repairs, Installing at its original location, Connecting, Testing and commissioning of water cooler upto 120 litres, Ozone based filter type hot and cold water cooler 85 litres capacity, Refrigerator upto 310 litres capacity all as specified & directed. Note:- Spares will be measured and paid separately

Material & Labour for disconnecting from position, transporting to local workshop for servicing including cleaning of interior parts and body with solvent materials, replacement of unserviceable spares / parts if required, necessary repairs, Transporting back, Installing at its original location, Connecting, Testing and commissioning of water cooler upto 120 litres, Ozone based filter type hot and cold water cooler 85 litres capacity, Refrigerator upto 310 litres capacity complete all as specified & directed. Note:- Spares will be measured and paid separately

Material &Labour for Factory reconditioned hermetically sealed compressor unit suitable for water cooler upto 120 litres, ozone based filter type hot and cold water cooler 85 litres, Refrigerator upto 310 litres, Split type Air conditioner upto 3 TR for exchange of the existing unserviceable sealed compressor unit including initial charging of gas and oil all as specified & directed

Supply & Fix in repair Condensing coil made out of copper tube and aluminium fins suitable for split AC upto 3TR, water cooler upto 120 litres, Refrigerator upto 310 litres including necessary brazing, gas charging, leak testing, vacuumising etc all as specified and directed.

Supply & Fix in repair Evaporator coil of made out of Copper tube suitable for Refrigerator of capacity upto 310 Litres

Supply & Fix in repair D S Candle suitable for Hot and Cold water cooler.

Supply & Fix in repair Filter Carbon suitable for Hot and cold water cooler.

Supply & Fix in repair main board suitable for Hot and cold water cooler

Supply & Fix in repair power supply PCB suitable for Hot and Cold water cooler

Supply & Fix in repair Transformer suitable for Hot and cold water cooler

Supply & Fix in repair Solenoid valve suitable for Hot and cold water cooler

Supply & Fix in repair Pressure Pump suitable for Hot and cold water cooler

Supply and Fix Heater coil suitable for Hot and cold water cooler

Supply and Fix in repair 3 Core multistranded Copper Conductor PVC insulated sheathed flexible cable of size 2.5Sqmm complete all as specified and directed.

Supply and charging refrigerant gas up to required level including connected works such as pressure testing/Leak test with nitrogen before filling refrigerant gas complete for split AC upto 3 TR, water cooler upto 120 litres, ozone based filter type hot and cold water cooler 85 litres, Refrigerator upto 310 litres, complete all as specified and directed by Engineer-in-Charge

Material & Labour for servicing of Split AC indoor/outdoor unit upto 3 TR comprising through cleaning, lubricating of all moving parts, replacement of worn out screws, bolts, rectifying electric wiring defects etc to make the unit for smooth functioning complete all as specified and directed by Engineer-in-Charge

Supply and replace compressor sealed unit of Split AC upto 3TR, water cooler upto 120 litres, ozone based filter type hot and cold water cooler 85 litres, Refrigerator upto 310 litres,replacement of copper tubing/capillary strainer etc including gas charging complete, testing and commissioning all as specified and directed by Engineer-in-Charge. Note: Cost of gas charging shall be included in the quoted rates.

Supply and replace capacitors 6/10/36 mfd.

Supply and replace capacitors 80/100/120 mfd and 45 + 6 mfd.

Supply and replace starting relay suitable for Split AC upto 3TR, Water cooler upto 120 litres, Refrigerator upto 310 litres capacity.

Supply and replace thermostats unit hot/cold suitable for Split AC upto 3TR, Water cooler upto 120 litres, Refrigerator upto 310 litres capacity ozone based filter type hot and cold water cooler 85 litres, Geyser 25/50 litres, complete all as specified and directed.

Supply and replace overload protector suitable for Split AC upto 3TR, Water cooler upto 120 litres capacity.

Supply and replace blower/condenser fan motor complete with necessary mounting bracket to and base frames for Split AC upto 3TR and water cooler upto 120 litres capacity complete all as directed.

Supply and fixed Air filter suitable for 1.5/2.0/3.0 ton split type AC of any make complete all as directed.

Supply and fix in repair PCB circuit board complete suitable for 1.5/2.0/3.0 ton capacity split type air conditioner of any make complete all as specified and directed.

Supply and fixed push cock/tap as per existing suitable upto 120 litres capacity water cooler as per existing complete all as specified and directed.

Supply and fix in repairs low density polyethylene (LDPE) pipe 16 mm dia (outer), 450 mm long suitable for hot/cold water application with brass union on both sides to suit 15 mm bore G.I/CPVC pipe including taking down the old one, complete all as specified and directed.

Supply and replace down rod up to 3 metre length made of 15mm dia GI Tubing duly painted suitable for Ceiling fan any type any size including nut, bolt, split pin made out of nickel plated mild steel with rubber reel insulator including dismantling old one complete as specified and directed.

Amount of Credit Schedule shall be deducted to arrive the Contract Sum.

Kuriako Mathai and company

Ashbel Engineering Enterprises