Loading…
Loading…
Tender Value
₹50.0 L
EMD Value
₹49,990
Closing Date
16 Jun 2026, 6:00 pm
The Chief Officer, Padra Municipality, Padra
BID DOCUMENTS FOR CONSTUCTION WORK OF COMPOUND WALL, TOILET BLOCK, PAVER BLOCK, SUBWERSIBLE PUMP SET, STORM WATER DRAIN AND LED STREET LIGHT IN VARIOUS AREA AT PADRA NAGARPALIKA UNDER: VIKENDRIT JILLA AYOJAN YEAR: 2026-27
308986
VIKENDRIT JILLA AYOJAN YEAR: 2026-27
Open
Civil - All
Vadodara
12 documents required · 12 mandatory
₹1,770
The Chief Officer, Padra Municipality, Padra
₹49,990
27 May 2026
27 May 2026
27 May 2026
16 Jun 2026
27 May 2026
Total Amount Rs.
SECTION-7 BILL OF QUANTITIES-423
Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
Signature of Contractor President Chief Officer
Padra Nagarpalika Padra Nagarpalika
SECTION-7 BILL OF QUANTITIES-424
PADRA MUNICIPALITY, PADRA
NAME OF WORK :- ESTIMATE FOR FOUNDATION WORK OF COMPOUND WALL AT MUKHIDHAM,
(SMASHAN) ON JASPUR ROAD, PADRA
Qty. Description Unit Amount
1 42.98 Filling in foundation and plinth with murrum or selected soil in
Cmt layers of 20 cm thickness including watering, ramming and
consolidating etc. complete. 296.29 Cmt.
2 10.75 Providing and laying cement concrete (1:4:8) (1 Cement, 4 Coarse
Cmt. sand, 8 Crushed stone agreegate 40 mm nominal) and curing
complete excluding cost of formwork in foundation and plinth.
3 5.52 Brick work using common burnt clay building bricks havingcrushing
Cmt strength not less than 35 kg./Sq.Cm. in foundation andplinth in
Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional
4 5.52 Finishing wall with water proofing cement paint of on wall surfaces
Smt. (Two coats) to give an approved brand and manufacture and of
required shape even shade after thoroughly brushing the surface
to remove all dirt and remains of loose powered materials.
5 27.00 Providing and laying white glazed tiles 6mm thick in flooring treads
Smt. of steps and landing laid on a bed of 12mm thick cement mortar
1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in
white cement. 939.18 Smt.
6 48.72 Providing and laying polished Granite tiles 18 mm thick in risers of
Smt. steps, skirting Dedo and pillars laid on 10 mm thick cement mortar
1 : 3 (1 cement : 3 course sand) and jointed with gray cement slurry
mixed with pigment to match the shade of slab including rubbing,
polishing, Moulding etc. complete. For Flooring, Doors & Windows
SBD SECTION-7 BILL OF QUANTITIES-425
7 237.07 Providing and laying polished Kota stone slab flooring over 20mm
Smt (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse
sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry
including rubbing and polishing etc. complete. (B) 30 mm thick
8 112.18 Providing and laying polished Kota stone slab flooring over 20mm
Smt (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse
sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry
including rubbing and polishing etc. complete. (B) 30 mm thick
Add : 18 % GST, Rs.
SBD SECTION-7 BILL OF QUANTITIES-426
PADRA MUNICIPALITY, PADRA
NAME OF WORK :- ESTIMATE FOR CONSTUCTION WORK OF TOILET BLOCK AT MUKTIDHAM ( SMASHAN) ON
JASPUR ROAD AT PADRA.
Item Qty. Description Total Unit Amount
1 21.20 Excavation for base footings upto depth 1.5 m. including sorting
Cmt. out and disposing of the excavated material upto 50 m lead
(loose or soft soil) 120.01 Cmt.
2 11.70 Excavation for base footings upto depth 1.5 m. including sorting
Cmt. out and disposing of the excavated material upto 50 m lead
(loose or soft soil) 133.05 Cmt.
3 29.10 Filling available excavated earth (excluding rock) in trenches.
Cmt. plinth, sides of foundations etc. in layers not exceeding 20 cm. in
depth consolidating each disposited layer by ramming and
watering. 133.65 Cmt.
4 2.40 Filling in foundation and plinth with murrum or selected soil in
Cmt. layers of 20cm thickness including watering, ramming and
consolidating etc. complete. 296.29 Cmt.
5 7.90 Carrying out plinth treatment to post construction/existing
Smt. structure by spraying chemical solution for termite control
treatment including labour and material consistment with I.S.I
specification. Using Chlordene and chiorpurfiles 20 EC. As per
6131_paret-II consteration weight one percent is recommended
i.e. one litre 20 EC chemical emulsion with 19 liter give 1%
concrentration inclusive of one litre chemical emulsion
application at the rate of 5 litre chemical/sqm of surface as
recommended as per I.S.
6 3.80 Providing and laying cement concrete 1:4:8 (1- Cement : 4-
Cmt. coarse sand : 8- hand broken stone aggregates 40 mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and Plinth 2747.21 Cmt.
7 Providing and laying controlled cement concrete M-250 and
curing complete including the cost of formwork and excluding the
cost of reinforcement of reinforced concrete work in
a 3.78 -- do -- for Col footing 4497.53 Cmt.
b 1.34 -- do -- for Col up to PL 7406.84 Cmt.
Cmt. SBD SECTION-7 BILL OF QUANTITIES-427
c 1.00 -- do -- for Ground Beam 5842.35 Cmt.
d 0.30 -- do -- for Plinth Beam 5842.35 Cmt.
8 Providing and laying controlled cement concrete M-200 and
curing complete including the cost of formwork and excluding the
cost of reinforcement of reinforced concrete work in
a 0.30 -- do -- for Coping 5700.44 Cmt.
b 0.50 -- do -- for R.C.C. Lintel 8240.59 Cmt.
c 0.20 -- do -- for Chhajja 8026.47 Cmt.
d. 1.20 -- do -- for Col 8714.79 Cmt.
e 1.00 -- do -- for Beam 6258.97 Cmt.
f 1.60 -- do -- for R.C.C. Slab 6455.92 Cmt.
1444.00 Providing T.M.T. Bar Fe 500 / 500-D reinforcement for R.C.C.work
Kgs. including bending, binding and placing in position complete upto
floor two level.(upto 10 ton) 77.29 Kg.
10 1.00 Brick work using common burnt building bricks having crushing
Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground
Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints
curring etc. complete directed by Engineer-in-charge.
11 5.90 Brick work using common burnt building bricks having crushing
Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground
Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints
curring etc. complete directed by Engineer-in-charge.
12 10.00 (i) Half brick masonry in common brunt clay building bricks
Smt. having crushing strength not less than 35 kg/sq. cm. in cement
mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
(B) Conventional (upto 10 ton) 667.96 Smt.
SBD SECTION-7 BILL OF QUANTITIES-428
13 1.90 Providing and fixing flush door shutters, soild core construction
Smt. with frame of first class hardwood with crossboard and face
veneer or plywood face panels, including anodised aluminium
butt hinges with necessary screws. (B) Non-decorative type and
block board core anodised alluminium butt hinges in flush door
shutters. (2) 35 mm thick.
14 3.20 Providing and fixing FRP frame size 125 x 65 mm and 35 mm thick
Smt. FRP shutter with wood grain raised panneled design finish shutter
having extra reinforcement on side & edges in Gel coat finish. The
core of the shutter & frame is to be filed up with injected
polyurethene foam done in situ alongwith embedded wooden
pieces for stiffening & also taking hinges & fintures. The whole
FRP frame & Shutter is to be water proof weather proof, termite
proof & resistance to mild acid/alkhli. Rates are to be inclusive of
S.S.hinges with fastener Sleeve & alluminium fixtures &
15 1.50 Providing and fixing glazed louverd glass windows and ventilators
Smt. with teakwood frame 10cm x 7cm size including the cost of oil
painting to wood work etc. complete.(A)C.M 1:3
16 102.00 Providing and fixing M. S. grills of requried pattern to wooden
Kgs. frames of window etc. with M. S. flats at requried spacings and
frame alround square or round bars with round headed bolts and
nuts or by screws. (B) Plain Grills 105.18 Kg.
17 57.40 Providing 15 mm. thick cement plaster in single coat on Rough
Smt. (similar) side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in. (II) cement
mortar 1 : 4 (1 cement : 4 sand) Extra over item 58 to 64 for
finishing with a floating coat of neat cement slurry. (upto 10 ton)
18 9.90 Providing 10 mm. thick cement plaster in single coat on
Smt. brick/concrete walls for interior plastering up to floor two level
and finished even and smooth in. (II) cement mortar 1 : 4 (1
cement:4 sand) Extra over item 58 to 64 for finishing with a
floating coat of neat cement slurry. (upto 10 ton) Extra over
items 58 to 71 for plastering on cellings and sofits of stairs upto
floor two level instead of plastering on walls.
19 46.70 Providing and Laying 20 mm thick sand face cement plaster on
Smt. Walls upto height of 10 mts. Above ground level consisting of
12mm thicjk backing coat of C.M 1:3 (1 Cement, 3 Sand ) and
mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.
SBD SECTION-7 BILL OF QUANTITIES-429
20 67.30 Distempering (Three Coat) with oil bound washable distemper of
Smt. approved brand and manufacture and of required shade on wall
surfaces to give and even shade over and including a primer coat
with alkali resistance primer of approved brand after throughly
brushing the surface to give and even shade free from foreign
matter and also including preparing the surface even and
21 46.70 Finishing wall with Weather Proof Acrylic Emulsion Exterior Paint
Smt. on wall surface (three coat) to give and even shade and of
approved brand and manufacture including throughly brooming
and brushing the surface to remove all dirts, and remians of loose
powdered material.
22 8.70 Providing & Laying 24 "x 24" vitrified 8 mm thick tile flooring over
Smt. 20 mm ( average) base of cement mortar 1:6 (1: cement :
coarse sand ) on new surface or fixing on existing flooring by
adhesive material including dismentaling of existing flooring and
jointed with color cement slurry including finised with flush
pointing & cleaning the surface etc. complete for antiskit . (upto
23 2.90 Providing and laying white glazed tiles 6mm thick in flooring,
Smt treads of steps and landing laid on a bed of 12mm thick cement
mortar 1:3 (1 Cement : 3 Coarse Sand) finished with flush
pointing in white cement.
24 31.70 Providing and laying white glazed tiles 6mm thick in skitring risers
Smt of steps and dado on 10mm thick cement plaster 1:3 (1 cement :
3 coarse sand) and pointing in white cement jointed with white
25 9.60 Providing and laying broken china mosaic flooring for terrace
using 12mm to 20mm broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be tempered to bring
mortar crème out upto surface using white cement including
rounding off junctions and extending them upto 15cm along the
wall, clearing with water and oxalic acid. etc. as directed.
SBD SECTION-7 BILL OF QUANTITIES-430
26 8.00 Providing, Supplying, Lowering and Laying in standard length ISI
Rmt. mark rigid unplasticised PVC pipes suitable for potable water with
ring fit joint including cost of rings, as per IS Specification no.
4985/1988 including all local and central taxes, transportation,
freight charges, octroi, inspection charges, loading, unloading,
conveyance to the departmental stores and including cost of
jointing material etc. complete.75 MM
27 1.00 Providing and fixing wash down water closet European type W.C.
Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a
pair of C.L.I. or Mild Steel Brackets, complete with fittings such as
lead value siphon, 15mm nominal size brass ball value with
polythene float, C.P. Brass handle unions and couplings for
connections with inlet, outlet and over flow pipes, 40 mm dia
flush bend including cutting holes in walls and making good the
same connecting the flush bend with cistern and closet etc.
comp. incl plastic sheet cover including jointing trap with pipe in
C.M. 1:1 ( Cement : 1 fine sand) (a) Viterous China - (i) In White
28 1.00 Providing and fixing G.I. Inlet Connection for flush pipe with W.C.
Nos. Pan. 39.78 Nos.
29 3.00 Providing and fixing 430mm x 260mm x 350mm size white
Nos. earthen ware flat back or corner type urinal of approved quality
including. Connections the urinal with waste pipe, stop tap etc.
30 5.00 Providing and fixing screw down bib tap of following size (A)
Nos. Brass screw bib tap polished bright - 15mm
31 2.00 Providing and fixing gun metal chek or non return fullway wheel
Nos. valve. (A) 15 mm Dia. 186.83 Nos.
32 2.00 Providing and fixing 100 mm dia sand cast iron grating for gully,
Nos. floor or nanhi trap. 36.98 Nos.
33 2.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm.
Nos. Inlet and 50mm. Dia outlet having self cleaning design with C. I.
Screwed down or hinged grating and stainless steel jali at F.F.I.
Including cost of making cuts in walls slab floor etc. and making
them as per original testing etc. complete as directed by Engineer-
SBD SECTION-7 BILL OF QUANTITIES-431
34 2.00 providing and fixing SW gully trap with CI grating brick masonry
Nos. chamber and water tight CI cover frame of 300mmx300mm size
inside with standard weight. Square mouth Traps (A) 100x100mm
size P trap type.
35 1.00 Providing, laying and constructing brick masonry chamber for
Nos. underground C. I. Inspection Chamber and bends with bricks
having crushing strength not less than 35Kg./Cm2 on C. M. (1:5)
(1 cement, 5 Sand) C. I. Cover with frame (light duty) of 455mm x
610mm internal dimension total weight of cover with frame to be
not less than 38.00 Kgs. (Wt. of Cover 38 Kgs. and wt. of Frame
Kgs.) with R.C.C. top slab with 1:2:4 (1 cement, 2 Coarse sand,
graded stone (Kapachi) ) foundation concrete 1:5:10 (1 cement,
Coarse sand, 10 brick bats of 40mm nominal size) inside plaster
15mm. thick with C. M. 1:3 (1 cement, 3 Coarse sand) finished
smooth with a floating coat of neat cement slurry on walls and
bed concrete including curing etc. complete as directed by
Engineer-in-charge.
Inside Dimentions 600mm x 850mm and 450mm deep for pipe
line with Three or more Inlets.
36 50.00 Providing, laying and jointing in true line and level 32 mm dia
Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as
Prince/ supreme/astral/finolex or equivalent as approved by
Engineer In Charge. Pipe shall be fixed on the wall with the help
of clamp at every two meter c/c. or shall be concealed as
directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including
cost of all materials.
37 25.00 Providing, laying and jointing in true line and level 15 mm dia
Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as
Prince/ supreme/astral/finolex or equivalent as approved by
Engineer In Charge. Pipe shall be fixed on the wall with the help
of clamp at every two meter c/c. or shall be concealed as
directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including
cost of all materials.
SBD SECTION-7 BILL OF QUANTITIES-432
38 30.00 Providing, laying and jointing in true line and level 110 diametre
Rmt. U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain
and other end socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage system pipe line,
pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size 110 mm
diametre x 149 mm length x 145 mm heigh at every 2000 mm
center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
39 500.00 Providing erecting and fixing double coated syntex PVC ISI or
Ltr. equivalent PVC (ISI) mark water tank of required capecity each
with all necessary fittings & connection etc. complete on terrace
40 1.00 Providing and fixing white viterous china flat back wash basin of
Nos. 550mm x 400mm size with single hole for pillar tape with C.I. or
M.S. brackets painted white including cutting holes and making
good the same. Rates including providing and fixing 32mm dia
C.P. Brass waste couplin, 32mm dia M.I. Fisher unit, Brass screw
down stop tap of 15mm dia pillar tap capstan head, screw down
high pressure with screws, shanks, back nuts, PVC pipe & 32mm
dia flexible waste pipe up to Nani Trap etc. complete as directed
by engineer in charge.
Add : 18 % GST, Rs.
SBD SECTION-7 BILL OF QUANTITIES-433
PADRA NAGARPALIKA, PADRA
NAME OF WORK:- ESTIMATE FOR PROVIDING SUPPLYING & FIXING PAVER BLOCK AT
MUKTIDHAM ( SMASHAN) AT, PADRA
Description Qty. Unit Amount
1 Box cutting the road surface to proper slope and camber
for making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
2 Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6- hand broken stone aggregates
mmnominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth
3 Providing and fixing pre-cast Rubber Dye / steel Dye inter
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and
as per approved design Confirming to IS 15658 :
including 35 mm Sand layer for levelling and filling the
joint with sand in proper line and level as per guidlines of
IRC : SP 63-2018 etc. Complete 311.00 704.07 Smt.
Add : 18% of GST, Rs.
SBD SECTION-7 BILL OF QUANTITIES-434
PADRA NAGARPALIKA, PADRA
NAME OF WORK:- ESTIMATE FOR PIPE DRAIN NEAR MANUSMRUTI HALL AT, PADRA
Description Qty. Unit Amount
1 Box cutting the road surface to proper slope and camber
for making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead. 110.00 106.81 Cmt.
2 Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6- hand broken stone aggregates
mmnominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth
3 Providing and fixing pre-cast Rubber Dye / steel Dye inter
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and
as per approved design Confirming to IS 15658 :
including 35 mm Sand layer for levelling and filling the
joint with sand in proper line and level as per guidlines of
IRC : SP 63-2018 etc. Complete
4 Up Gradation of Chamber. 10.00 3082.52 Nos.
5 Demolation Including Staking Of Serviceable materials and
Disposal of unservicable materials wirh all lean and lift (i)
6 Excavation for foundation for depth from 1.5 m to 3.0 m
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(A) Loose
or soft soil (CLEANING WORK IN DRAIN) 18.00 133.05 Cmt.
SBD SECTION-7 BILL OF QUANTITIES-
7 Providing and laying controlled cement concrete M-200 and
curing complete excluding the cost of formwork and
reinforcement of reinforced concrete work in.
-- do -- for R.C.C Top Slab 6.94 4460.86 Cmt.
8 Providing TMT Bar FE 500D reinforcement for R.C.C. work
including bending, binding and placing in position complete
upto floor two level.
9 Providing and fixing M.S. grills of required pattern to wooden
frames of windows etc. with M.S. flats at required spacings and
frame alround, square or round bars with round headed bolts
and nuts or by screws. (a) Plain Grill.
10 Painting two coat (Including priming coat) on new steel and
other metal surface with enamel paint, brushing, interior to give
an evel shade including cleaning the surface an even shade
including cleanicn the surface of all dirt, dust and other foreing
matter. 0.85 102.66 Smt.
11 Providing formwork of ordinary timber planking so as to give a
rough finish including centering shuttering strutting and
propping etc. Height of propping and centering below
supporting floor to ceiling not exceeding 4 M. and removal of
the same for in situ reinforced concrete and plain concrete work
in. (B) Flat surfaces such as soffits of supspened floors slabs
Landings and the like. (1) Floors etc. upto 200 mm in thickness.
Add : 18% of GST, Rs.
SBD SECTION-7 BILL OF QUANTITIES-
PADRA MUNICIPALITY, PADRA
PURCHASE OF BOREWELL SUBMERSIBLE PUMP SET FOR WATER WORKS
DEPARTMENT AT PADRA MUNICIPALITY
Sr. No. DESCRIPTION QTY RATE PER AMOUNT Rs.
Electric Motor Driven Borewell Submersible
Pump Set confirming to IS 8034 and motor
confirming to IS 9283 working at 3 phase 400 /
440 volt 50 Hz AC supply & 2900 RPM. 45 HP,
75 M Head & 1700 LPM.
SBD SECTION-7 BILL OF QUANTITIES-437
PADRA NAGARPALIKA, PADRA
NAME OF WORK:-ESTIMATE FOR PROVIDING SUPPLYING & FIXING PAVER BLOCK FRONT SIDE
OF TOWNHALL GATE AT, PADRA
Description Qty. Unit Amount
1 Box cutting the road surface to proper slope and camber
for making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
2 Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6- hand broken stone aggregates
mmnominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth
3 Providing and fixing pre-cast Rubber Dye / steel Dye inter
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and
as per approved design Confirming to IS 15658 :
including 35 mm Sand layer for levelling and filling the joint
with sand in proper line and level as per guidlines of IRC :
SP 63-2018 etc. Complete
4 Up Gradation of Chamber. 3.00 3082.52 Nos.
Add : 18% of GST, Rs.
Add 1% Quality Control
SBD SECTION-7 BILL OF QUANTITIES-438
PADRA NAGARPALIKA, PADRA
NAME OF WORK :- ESTIMATE FOR 250 MM DIA STROM WATER DRAIN FRONT SIDE OF SUNRISE
HOSPITAL AT PADRA
Item Qty. Description
Total Rate Unit Amount
1 27.60 Demolition including stacking of serviceable materilas
Cmt. and disposal of unserviceable materials with all lead and
lift. (i) R.C.C. work
2 199.50 Excavation for base footings upto depth 1.5 m. including
Cmt. sorting out and disposing of the excavated material upto
50 m lead (loose or soft soil) a) EXCAVATION UPTO
3 Providing and supplying ISI Standard R.C.C. pipes(of
Sulphate Resisting Cement) in standard lengths of
following class and diameter suitable for either collar
joints or rubber ring joints including all taxes, insurance,
transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyance to departmental
stores, stacking etc. complete. (IS - 458/ 1989 110 x
Note : One collar should be supplied with each full length
plain ended RCC pipe, cost included in rates below. One
rubber ring should be supplied with each full length
socketed pipe, cost included in rates below.
4 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1
110.00 1/2 of following diameters in proper position, grade and
Rmt. alignment at all level as directed by Engineer-in-charge
including conveyance from stores to site of work, labour,
giving hydraulic testing as per ISI code.
SBD SECTION-7 BILL OF QUANTITIES-439
5 191.70 Filling Availabale Excavated Earth (excluding Rock) in
Cmt. trenchess plinth, sides of foundation etc. in layers not
exceding 20 cm in depth consolidated each deposited
layer by ramming and watering .
6 8.00 Construction of Brick masonry chamber for pipe drain
Nos. including excavation, p.c.c. (1:4:8), c.c. (1:2:4) benching,
Brick Wall 350 mm thick, 230 mm Thick M-200 slab ,
mm thick (1:3) smooth plaster and including MS frame
and cover Aprox Weight 85.00 kgs with all necessary
labour and material in all respect directed by EIC.
Inner Clear Dimensions 1.20 x 1.20 x 1.20 37147.28 No.
Add : 18% of GST, Rs.
Add 1% Quality Control
SBD SECTION-7 BILL OF QUANTITIES-440
PADRA MUNICIPALITY, PADRA
ESTIMATE FOR PROVIDING & FIXING LIGHTS AND FIXTURES AT VANKAVACH ON JASPUR ROAD AT PADRA.
Quantity Unit Discription Unit Amount
1 360.00 Rmt. Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper
cable 1.1 KV grade to be erected as directed of following size.
(A) 2 Core 2.5 sq. mm 101.00 Rmt.
2 1.00 Ea. Approved make Four pole moulded case circuit breaker having
breaking capacity ICU of 25 KA. at 415 V,having normal current
rating up to 25 A to 100A. with Fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all internal connections
& complete erected in existing 16 G.M.S. housing. Cat-ll
3 3.00 Each Providing and erecting Approved make RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short Circuit withstand
capacity of 10 KA and suitable for operation on 3 phase and neutral
415V,50Hz. having characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic component
for following Max. rating erected as directed.
(iii) 63 Amps. FP Cat. III 3040.10 Each
4 40.00 Ea. providing and erecting Miniature circuit breaker single pole 0.5A to
2A system and having breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with ISI Mark
Cat.III 270.68 Ea.
5 18.00 Kg Providing and erecting Annealed bare Copper wire 8 to 16 SWG.
SBD SECTION-7 BILL OF QUANTITIES-441
6 40.00 Ea. Providing and erecting Pipe type earthing having 150 cms.long and
2.5 cms. dia. galvanised iron pipe with coupling and buch buried in
specially prepared earth pit complete with necessary 8 SWG earth
7 1.00 Ea. Supplying & erecting funnel type earthing having earth plate of
following size burred in specifically prepared earth pit 3 mtr.
below ground with 40 kg. charcoal and salt with alternate layers of
charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh
for watering & bricks masonry block, C.I. Cover complete as per
para 7.3 of IS 3043 with necessary length of double Galvanised Iron
/ copper earth wire No 6 SWG bolted with lug to the plate and
covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected
to the nearest switch gear with end socket as per direction & duly
tested by earth tester confirming to IS (As per drawing) with
following specification
(C) with 60 x 60x 0.315 cms. Copper earth Plate
8 40.00 Ea. For using salt and charcoal / coke as required for pipe type
9 650.00 Mtr Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable
multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on
wall with necessary clamps or in existing trench / pipe of following
size of cables (C) 4 core 10 Sq. mm
10 650.00 Mtr. Providing & laying approved make Double walled corrugated pipes
(DWC) of polyethylene(conforming to IS 14930 II )with necessary
connecting accessories of same material at required depth in
existing trench for laying of cable. below ground / road surface
for enclosing cable (A)50 mm outer dia
11 160.00 Ea. Providing and, fixing heavy duty flange type brass cable gland with
rubber ring for PVC insulated armoured cable complete with out
going tails, insulating tape etc for following size of cables.
(C) 2 to 4 core 10 Sq. mm 38.38 Ea.
SBD SECTION-7 BILL OF QUANTITIES-442
12 40.00 Ea. Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm
O.D 6 mtr. Long duly painted with two coats of aluminium paint
complete with metallic base- plate of 300 mm x 300 mm x 4mm
thick for using as a compound light pole with approx. weight 47 Kg.
13 40.00 Ea. PProviding 1:2:4 cement concrete foundation & 70 % PCC from
bottom including excavation for the pole of size 45 x 45 x 100 cm.
Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm
dia x 45 cm) high upper ground level with necessary curing and
finishing in approved manner. ( for 4 & 6 mtr pole)
14 40.00 Each Supplying and erecting LED street light / Flood light fittings with
High power White LEDs wattage of 1Watt and above assembled on
single MCPCB, efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with smooth finish
powder coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses with company mark/name engraved
or embossed 120 to 300 V,Power Factor more than 0.95, THD <
%, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE /
OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.)
make LED used for luminaire. ( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may select
any wattage capacity between the ranges shown.)
(C) Post Top Lantern LED fitting comprises of finish cast aluminum
spigot and spun aluminum canopy fixed with opal polycarbonate,
pipe arrangement for vertical mounting driver and accessories
wired upto terminal block.IP 65(ii)32-40WCat-lll
15 1.00 Ea Supplying & erecting power contactor ,AC3 duty for time switch
complete erected as per direction Cat III
(B)2 pole 250 V 32 Amp
SBD SECTION-7 BILL OF QUANTITIES-443
16 1.00 Nos. Supplying & erecting approved make Digital time switch having
lithium cell 6 years operative and operate battery backup 1 channel
day clock with 14 memory programme, suitable to operate on
240V + 5%, 16A with, floating contacts Minimum switching setup
time 1 minimum & LCD display. Also comprised permanent ON/OFF
switching. Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover erected as required
with necessary connection erected as directed.
14 1.00 No. Supplying & erecting IP 55 grade following size section pillar
fabricated from joint less M.S. Sheet with angle iron legs made
from jointless M.S. Angle with cable clamps to be buried in ground
to have appropriate erection to work uniform until erected with
cement concrete foundation and 45 cm high bricks work finishing
with plaster etc. hinged double door internally supported on both
side, with internal and outside looking arrangement with look and
keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is
welded and other with nut and bolt for erecting Bakelite sheet.
Painting the Section Pillar inside and out side with three tank
powder coated paint. section pillar roof should be without joint
with water leakage proof & tested as per IP 55 test & followed by IS
2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from
Gauge MS Sheet with angle iron legs 45 cm long made from 35 X
35 X 5 mm thick MS angle.
Add 18.00 % GST
SBD SECTION-7 BILL OF QUANTITIES-444
PADRA MUNICIPALITY, PADRA
NAME OF WORK:- PROVIDING & ERECTING LED STREET LIGHT, AT MAMA PARTY PLOT,SHREENATH MILL TO
TAJPUR ROAD, SARVODAY CHAR RASTA TO MAMA PARTY PLOT ROAD & SUNDRAM HOTEL TO PARNAMI
AGARBATTI MAIN ROAD AT PADRA DIST. VADODARA
Quantity Unit Discription Unit Amount
1 940.00 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable
multistrand Aluminium conductor for 1.1 KV. to be laid on wall
with necessary clamps or in existing trench / pipe of following size
of cables (A) 4 core 16 Sq. mm 153.52 Mtr.
2 940.00 Mtr. Providing & laying approved make Double Walled Corugated pipe
(DWC) of polythylene (Confirming to IS-14930-II) with necessary
connecting accessories of same materials at required depth for
laying of cable. Below ground / road surface for enclosing cable
and back filling the same to make ground as per original. (A)
3 78.00 Nos. Supplying and erecting LED street light / Flood light fittings with
High power White LEDs wattage of 3 Watt and above assembled
on single MCPCB, efficiency more than 130 lm/w and corrosion
free High pressure die cast aluminium housing with smooth finish
powder coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95,
THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency >
%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC line supply
with over-voltage protection. (iii) above 24 to 36 watts Cat-lll
SBD SECTION-7 BILL OF QUANTITIES-445
4 80.00 Nos. Supplying and erecting LED street light / Flood light fittings with
High power White LEDs wattage of 3 Watt and above assembled
on single MCPCB, efficiency more than 130 lm/w and corrosion
free High pressure die cast aluminum housing with smooth finish
powder coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses, with toughened glass with
company mark/name engraved or embossed 160 to 270 V,Power
Factor more than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy>
lumens/watt . LED driver efficiency > 85 %.( fittings required LM-
79 & LM-80 certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge
may select any wattage capacity between the ranges shown.) (A)
Street Light (IP-65), Surge protection -4KV integral and ,Light must
have 440VAC line supply with over-voltage protection. (i) above
to 48 watts Cat-lll
Add 18.00 % GST Rs.
SBD SECTION-7 BILL OF QUANTITIES-446
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.pdf
Notes.pdf
SBD.pdf
OTHER IMPORTANT-1.pdf
OTHER IMPORTANT-2.pdf
OTHER IMPORTANT-3.pdf
Download all tender documents and submit your bid