ADDITION ALTERATION TO CADETS LIVING ACCN AT RIMC

Amount

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete all as directed and specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed and specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as directed and specified.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc. complete all as directed and specified.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as directed and specified.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantling of timber scantling 40 sq cm and over in section , in any position for unframed work complete all as directed and specified.

Dismantling of Mild Steel work of any description as in steel gate, post purlin, etc not otherwise provided for complete all as directed and specified.

Dismantling of steel/galvalume sheets of any description (corrugated, semi corrugated, etc.)sheets in roof coverings complete all as directed and specified.

Dismantling of wall and ceiling board,of any description complete all as directed and specified.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm and n exc 4.00 sqm each complete all as directed and specified.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed.

Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections complete all as specified and directed.

Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs complete all as specified and directed.

M&L for rendering 10mm thick on brick work surfaces in CM 1:4, on vetical surface complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.

M&L for non-skid coloured ceramic matt finished tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles coloured 300mmx 600mm ,8 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed

M&L for vitrified ceramic light shade/double charged/Ultra charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic light shade/double charged/Ultra charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm sqm, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic light / dark shade / Full body porceline coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic light/dark shade/Full body porceline cloured tiles tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.42 sqm , on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 20 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as directed and specified.

M& L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L for vitrified full body exterior coloured tiles 12 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm , in floors/skirting /riser/dado/treads etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 using 40mm granded brick aggregates as in sunken portion etc complete all as specified and as directed

S&F for 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M&L for brick work with old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid seprately.

M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:3 as doubing coat after applying one coat of alkaline anticorrosion chemical coating having specific gravity of 1.2 to 1.22 upon exposed reinforcement with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B0 using 12.50 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including fair finish with using extra cement including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for 3 mm thick APP modified prefabricated in five layers & weight not less than 3.6 Kg/Sq mtr water proof membrane reinforced with non-wooven polyster with two coat of water proofing aluminium paint over top surface of water proofing membrane with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused with LPG flames laid over a coat bitumen @ 1.20 Kg /Sqm over a coat bituminous of primer 0.40 ltr per sqm over after cleaning existing plastered surfaces as per manufacturer instruction of APP modified membrane etc APP modified membrane shall be laid on primed surface by torch application method after allowing 24 hours for primer to dry, complete all as specified and as directed. Notes :- Rates includes to carried out the work on roof slab up to 3rd stories building nothing extra shall be admissible on this account

S & F 1st class hard wood (Teak) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, Framed and manufactred in situ Note :- The contractor shall bring the trunk of appropritae size as per direction of Engineer in charge at site and necessary cutting and manufacturig shall be only done at site no factory made material shall be allowed.

S & F 35 mm thick 1st class hardwood (Teak) manufactured in situ Glazed and skeleton shutters( single/ double), open rebated and prepared to receive glass, gauze, etc divided intosquares, with plain,chamfered or roun ded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) Note :- The contractor shall bring the trunk of appropritae size as per direction of Engineer in charge at site and necessary cutting and manufacturig shall be only done at site no factory made material shall be allowed complete all as directed and specified.

S & F 35 mm thick 1st class hardwood (Teak) manufactured in situ Plain, framed, panelled shutters ( single/ double) (any number of panels), with panels of timber flat on both sides (feather edged) Note :- The contractor shall bring the trunk of appropritae size as per direction of Engineer in charge at site and necessary cutting and manufacturig shall be only done at site no factory made material shall be allowed complete all as directed and specified.

S & F 30 mm thick 1st class hardwood (Teak) manufactured in situ Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided intosquares, with plain,chamfered or roun ded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) Note :- The contractor shall bring the trunk of appropritae size as per direction of Engineer in charge at site and necessary cutting and manufacturig shall be only done at site no factory made material shall be allowed complete all as directed and specified.

Supply & fixing factory made coloured WPC door frame 100% Solid (wood polymer composite) Size 100mm x 50 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed. (colour to be approved by Engineer-in charge )

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as directed and specified.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as directed and specified.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as directed and specified.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F double legged floor door stopper 150 mm long aluminium alloy with rubber etc complete all as specified and as directed

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as directed and specified.

S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised with of flap (when opne) 30 mm etc complete all as directed and specified.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as directed and specified.

S & F glossy finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as specified and directed.

S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed

M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S & F vitreous china wash hand basin counter sunk type including brackets, white size (550 x 400) mm incl cutting for and pinning in ends of brackets 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F in repair chromium plated shower roses 125 mm bore size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

All as per Srl item no 63 above but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed

S&F as in repair 15mm bore WHB Mixer fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F in repair tubular towel rail 20mm dia 'D' type brass chrormium plated 600mm long between flanges complete all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed.

S&F in repair for 75 mm bore out let cast iron floor trap incl cockroach trap with gratings including jointing to waste pipe fixed in cement concrete tye B-1 (1:2:4) etc complete all as specified and as directed

S&F 50 mm bore Cast iron spun soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

S&F for 75 mm bore Cast iron spun soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

S&F for 100 mm bore Cast iron spun soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed

S&F 75mm bore cast iron Bend of (any radius), spun pipe diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

S&F 100 mm bore cast iron Bend of (any radius), spun pipe diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

S&F 75mm bore cast iron Tee of (any radius), spun pipe diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

S&F 100 mm bore cast iron Tee of (any radius), spun pipe diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

S&F 50 mm cast iron cowls complete all as specified and as directed

M & L for ATT post construction Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified.

M & L for ATT post construction Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified

S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

M & L for Minimum 23 mm X 150mm X 2700 mm size WPC Lining fluted panels (fixed to wall/ceiling) inclusive of solvent and ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire etc complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm over prepared surface of white birla wall care putty complete all as specified and as directed

M&L for preparation of new / old wall surfaces and aplying wall putty 2mm thick to make the surface smooth as specified and directed. (Note This work is to be carried out upto triple storey building the rate of scaffolding is included in this item)

BLANK

M & L for finishing walls with acrylic smooth exterior paint of required shade (Two or more coat applied @ 1.67 litre / 10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg / 10 Sqm on brick concrete wall plastered surfaces complete all as pecified and directed by Engineer in charge. (Note This work is to be carried out upto triple storey building the rate of scaffolding is included in this item)

M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed

M&L for two coats of black bituminous paint on surfaces of any description wood, concrete and brick etc complete all as specified and directed .

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

M&L for reinforced cement concrete 1:2:4 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:- Reinforcement to be measured & paid under respective items.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M & L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet (EWC) including PVC seat cover white with CP hinging device complete all as specified and as directed by Engr-in-charge.

S&F 1000 litre ISI marked rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F Brass CP Health Faucet with 1 m long CP flexible cord complete all as specified and as directed

S & F 12 mm thick waterproof, termite proof and fire resistant HPL Board planks of suitable size for external facia and façade complete all as specified and directed

S&F Virteous China bowl urinal flat back size of 590X390X375 mm with grating and union for discharge pipe ISI marked fixed in repairs.

Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified.

M & L for forming square grooves in plaster n exc 12 mm Deep and n Exc 15 mm on face of plastered surface complete all as specified and directed

S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed.

S & F 1.60 mm thick plain black skeet in wall cladding, steel gates , framed work, ornamental work etc and similar work cut to size, holes punched including round headed screws clout nails or riveted and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitered angles, etc as required complete all as specified and directed

S&F as in repair 15mm bore 3 in 1 wall Mixer fancy type, cast copper alloy, with , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S & F 125 mm size SS butt hinges medium weight fixed with SS screws complete all as specified

S & F 75 mm size SS butt hinges medium weight fixed with SS screws complete all as specified

S&F 200 mm long Brass handle(fancy polished),etc complete all as specified and as directed

S&F 100 mm long Brass handle (fancy polished) etc complete all as specified and as directed

S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm long of extruded section etc complete all as specified and as directed

S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 125 mm long of extruded section etc complete all as specified and as directed

S & F 250 mm long and 12 mm dia (min) Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed compete all as specified.

S & F 300mm,Brass ordinary rat tail rod pattern springs including roller and roller plate complete

S & F 1st class hardwood (Teak) manufactured in situ Moulding as in cornices, picture rails and the like n exc 6 sqcm in sec as directed by Engineer in Charge Note :- The contractor shall bring the trunk of appropritae size as per direction of Engineer in charge at site and necessary cutting and manufacturig shall be only done at site no factory made material shall be allowed.

M & L for melamine polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface with sand paper including base coat, coat of melamine wood filler on new works with two or more coats, and finishing with top coat of melamine with two or more coats complete all as specified and as directed by Engineer in charge

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

S&F for mild steel window grills as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.

S & F 12 mm thick toughened glass( plain/frosted/etched) as directed by Engineer In Charge including necessary arrangement of fittings and fixtures made of (304 grade SS) like support, brackets, legs , hinges, locks, connection plates, clamps etc, complete all as specified and directed by Enginer-In-Charge

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil complete all as specified and directed by Engineer-In- Charge.

Rough Excavation n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil complete all as specified and directed by Engineer-In- Charge.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed by Engineer-In- Charge.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed by Engineer-In- Charge.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge.

M&L for providing cement concrete coping with plain fair faces incl chamferes, weathering, throating etc type B0, 1:2:4 using 12.5mm graded stone aggregate and set in CM 1:4 complete all as specified and directed by Engineer-In- Charge.

M & L for cement concrete 1:4:8 type D-2 for 150 mm dia in concrete bed to drain pipes including packing under and bedding of pipes etc complete all as specified and directed by Engineer-In- Charge

M & L for reinforced concrete pipes,150mm dia class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-In- Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer-In- Charge. (Water proofing compound shall be measure and paid separatelly).

M&L for 15mm thick rendering on other than fair faces of brick work in CM 1 : 6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-In- Charge.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed by Engineer-In- Charge.

M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc complete all as specified and directed by Engineer-In- Charge.

M & L for Construction of septic tank 50 users capacity with excavation and earth work in any type of soil, PCC 1:2:4 type B2 in foundation, brick work in CM 1:4, RCC M-25 using 20 mm graded crushed aggregate as specified, duly reinforced with 8mm TMT bar @ 120mm c/c manhole covers, angle iron frame, vent shaft and sludge chamber etc. complete all as specified, directed and shown on drawing No TD - 217 sheet 1/7 to 7/7.

M & L for Construction of septic tank 100 users capacity with excavation and earth work in any type of soil, PCC 1:2:4 type B2 in foundation, brick work in CM 1:4, RCC M-25 using 20 mm graded crushed aggregate as specified, duly reinforced with 8mm TMT bar @ 120mm c/c manhole covers, angle iron frame, vent shaft and sludge chamber etc. complete all as specified, directed and shown on drawing No TD - 217 sheet 1/7 to 7/7.

M&L for soakage well with size 3.0 m dia x 4.5 m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honeycombed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in Cement mortar, RCC cover slab in M-25, interconnecting pipes of RCC complete filled with brick bats complete all as specified and directed.and shown on drawing No TD -309 sheet 1/4 to 4/4.

M&L walling random rubble uncoursed well bonded, bedded & solidly hearted, built in CM 1:6 complete all as specified and directed

M&L for Raised pointing to random rubble, uncoursed masonry in CM 1:4 without using extra cement complete all as specified and directed

M/L PCC 1:3:6 type C0 ( using 12.5 mm thick graded stone aggragate) as in surface channel drain. Complete all as specified and directed

S & F medium grade galvanised steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 25mm dia pipe (including short length) Complete all as specified and directed

M & L for providing 595 mm x 595 mm false ceiling system, using hot dip galvanised steel section exposed surface with precoated capping, GI powdered coated tee and cross tee of size 24mm x 32 mm & 24mm x 27 mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19 mm x 19mm having 0.35mm gauge fixed to the wall. The above grid is to be suspended at every 1200mm c/c in both direction using 2mm thick pre straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS 14862) of size 595mm x 595mm and antine of the design (cascadev or electra) back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed by engineer in charge.

S & F aluminium extruded section body door closer hydraulically regulated, designation No 03, universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 Kg to 80 Kg and fixed complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in new concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories for GI metal flush box 1 Module to 12 Module as required at site for mounting of modular switches, sockets, fan regulator etc , including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule) Note:- Modular GI flush box, frame and plate will be measured and paid under respective items only.

(a) One light point /bell buzzer point controlled by one,one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one,one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches,relacement with modular 6A socket.

(d) One three pin 5 Amp socket on independent board,relacement with modular 6A socket

All as per item No 145 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm,relacement with modular 15/16 socket.

M&L New point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in new concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories for GI metal flush box 1 Module to 12 Module as required at site for mounting of modular switches, sockets, fan regulator etc , including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule) Note:- Modular GI flush box, frame and plate will be measured and paid under respective items only.

(a) One light point /bell buzzer point controlled by one,one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one,one way switch through Regulator.

(c) One three pin 6 Amp Modular socket on same board with other switches.

All as per item No 151 above but one 3 pin socket outlet 15/16 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

S&F Modular switch 1 way 6A,1 Module SP 250 V AC complete all as specified & directed.

S&F Modular switch 1 way 16A,1 Module SP 250 V AC complete all as specified & directed.

S&F Modular Socket,6A-2/3 pin combined,2 Module 250 V AC complete all as specified & directed.

S&F Modular socket outlet two in one three pin 6 Amp and 16 - 2/3 pin combined 2 module complete all as specified.

S&F Electronic Fan regulator Modular type 2M,finger proof/Shock Proof terminals complete all as specified and directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC complete all as specified and directed.

M&L in replacement sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings with chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old sub main wiring complete all as specified and directed.

Supply & fixing in replacement and Testing TP & N Vertical load line (VTPN) 6 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCCB 63 Amps,ICs=100%ICu, 16KA four pole as in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site complete all as specified and directed. (Note :- MCB/ MCCB shall be measured and paid separately)

S&F in replacement sheet metal enclosures 240 volt with 200 amps rated copper bus bar for double door 8 way IP-43DB's lk-09suitable for one MCB SPN as incoming and 6 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge ,including taking down old unserviceable DBs . (MCBs shall be measured and paid separately).

S&F MCB double pole 240 Volt 10 KA 40-63 Amp 'B' series conforming to ISI marked complete all as specified & directed .

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed .

S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

Supply & fix in replacement LED light fitting 1x18/20 W,220V AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fix new LED light fitting 1x18/20 W,220V AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet ,10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling fans complete with blades ,down rods ,without electronic regulator and accessories ,230 V ,1200mm sweep.Min air delivery 210 CFM with service value 6.00 BEE Five Star Rated with Brushless Direct Current(BLDC) Motor complete all as specified and directed. Note:(1)Rate for hanging arrangements of Ceiling Fan deemed to be included. (2) Old ceiling fan shall be deposited in E/M storeyard . Make (1) Havells Model No HAVELLS GLAZE 1200 mm BLDC (2) Orient Model No- Orient Electric Eco Tech Pro (3) Crompton Model No - Energion HS 1200 mm

Supply & fix exhaust fans steel body AC single phase 230 V of size 300 mm sweep with blades ,frame and louvers.M&L for making Holes of suitable size and making good disturbed surfaces as directed by Eng-in-charge deemed to be included in the quoted rate. Note: (1) Old Exhaust fan of any capacity shall be deposited in E/M storeyard . Make (1) Havells Model No Ventil Air DB 300 mm (2) Orient Model No- Orient Power Flow 300 mm (3) Crompton Model No - Trans Air 300 mm

Supply and Fixing , Integral LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed.

Supply and fixing LED luminaire 600mm x 600mm ,35/36 watt ,220V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with drivers ,holders ,LED lamp suitable for roof ceiling ,including connecting up with driver three core flexible copper conductor case of suitable size complete all as specified and directed.

Supply and fixing of GI Metal flush box 1 module, Complete all as specified and directed .

Supply and fixing of 1 Module metal frame with polycarbonate white cover plate Complete all as specified and directed .

Supply and fixing of GI Metal flush box 2 module, Complete all as specified and directed .

Supply and fixing of 2 Module metal frame with polycarbonate white cover plate ,Complete all as specified and directed .

Supply and fixing of GI Metal flush box 3 module, Complete all as specified and directed .

Supply and fixing of 3Module metal frame with polycarbonate white cover plate ,Complete all as specified and directed .

Supply and fixing of GI Metal flush box 4 module, Complete all as specified and directed .

Supply and fixing of 4 Module metal frame with polycarbonate white cover plate ,Complete all as specified and directed .

Supply and fixing of GI Metal flush box 6 module, Complete all as specified and directed .

Supply and fixing of 6 Module metal frame with polycarbonate white cover plate ,Complete all as specified and directed .

Supply and fixing of GI Metal flush box 8 module, Complete all as specified and directed .

Supply and fixing of 8 Module metal frame with polycarbonate white cover plate ,Complete all as specified and directed .

Supply and fixing of GI Metal flush box 12 module, Complete all as specified and directed .

Supply and fixing of 12 Module metal frame with polycarbonate white cover plate ,Complete all as specified and directed .

Supply and fixing of Blank 1 module,complete all as specified and directed.

Supply,Testing and Commisioning of 300mm Length Mono Color LED linear grazing luminaire mid power with housing material of extruded aluminium, dark grey (RAL7012) anodized finish. Luminaire weight should not be more than 1.8 kgs. System wattage not exceeding 20W and no. of LED not less than 9,CRI more then 80. Color temperature should be 2700K. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 17°-40° &16°-30°. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 100 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK07. Soft Copy of Catalogues with Link of the official web page , Test Certificates - Third party LM79,LM80,BIS R Number, UL Certificates, IES Files,Polar curve,Illuminance diagram,Third Party IEC 60598 test certificates submission is mandatory during bid submission.

Supply,Testing and Commisioning of 500mm Length Mono Color LED linear grazing luminaire mid power with housing material of extruded aluminium, dark grey (RAL7012) anodized finish. Luminaire weight should not be more than 2 kgs. System wattage not exceeding 27W and no. of LED not less than 12,CRI more then 80. Color temperature should be 2700K. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 17°-40° &16°-30°. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 100 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK07. Soft Copy of Catalogues with Link of the official web page , Test Certificates - Third party LM79,LM80,BIS R Number, UL Certificates, IES Files,Polar curve,Illuminance diagram,Third Party IEC 60598 test certificates submission is mandatory during bid submission.

Supply,Testing and Commisioning of 1000mm Length Mono Color LED linear grazing luminaire mid power with housing material of extruded aluminium, dark grey (RAL7012) anodized finish. Luminaire weight should not be more than 2 kgs. System wattage not exceeding 50W and no. of LED not less than 24,CRI more then 80. Color temperature should be 2700K. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 17°-40° &16°-30°. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 100 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK07. Soft Copy of Catalogues with Link of the official web page , Test Certificates - Third party LM79,LM80,BIS R Number, UL Certificates, IES Files,Polar curve,Illuminance diagram,Third Party IEC 60598 test certificates submission is mandatory during bid submission.

Supply,Testing and Commisioning installation,testing Commissioning of automatic street light control system of 16A suitable for automatic switching of Street lights of 240V, 50Hz, Controller shall be automatically switch off the street lights as programmed time setting and astro function. Following Components shall be fitted in a enclosure, wired and programmed for complete function. 1 No. 16A, 4pole MCB in thermal magnetic release for overload and shortcircuit protection, 1Nos 3 position (auto - off- manual) 16A, 4pole modular type contactors. Phase indication Lamps R+Y+B 230/400V Astonomical time switch of Switching Capacity 16A, 3P ohmic 250V AC, at PF-1, having minimum running reserve 5 years/43800 hours and clock precision 0.1sec./day, having facility of location programing by city name or geographical coordinates , offset time + /- 120 minute relative to sunrise/sunset.

Taking Down and re-fixing LED luminaire any typet ,220V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with drivers ,holders ,LED lamp suitable for roof ceiling ,including connecting up with driver three core flexible copper conductor case of suitable size complete.

Supply , installation, Testing & commissoning of transformer of capacity 100 KVA step down outdoor type copper wounded 11/0.433 KV (at no load) AC 3 phase 50HZ on secondry side double wound oil immersed naturally all air cooled with external cooling tubes /radiator , delta connected as on primary and star connected with netural brought on secondry) side and having tapping at (±) 2.5%,(±) 5% (±) 7.5% to be changed by hand operated OFF LOAD tap changing gear . The maximum temperature rise shoud not exceed 45 degree centigreade in oil and 50 degree centigrade in HV/ LV winding when measured by the resistance method after contineous full load run in ambient temprature the transformer shall confirming to IS 1180,Level 2 and comprising of following accessories. CONTD....

a) HT bushing suitable for 11 KV complete with all accessories housing in sheet steel enclosure - 03 nos. b) LT bushing suitable for 1100V complete with all accessories housing in sheet steel enclosure - 04 nos. c) Oil conservator with filter type drain valve and oil level guage. d) Dehydrating breather with first filling of dehydrating agent . e) Explosive vent. f) THERMOMETER pocket on tank cover g) Two earthing terminal on tank body to facilitate fixing of 32x6mm GI strips. h) One No 100mm thermometer dail type vapour pressure type having range 0-120 degree centigrade with maximum temprature indicator and re-setting device to maximum temprature including needle of temprature gauge : Max reading painted terminal. i) Rating plate with terminal plate. j) Oil level guage. k) Oil drain filter valve. l) Oil filter hole with cap/plug with connection complete. m) Air release valve/plug. n) 4 Nos plain solid cast steel dedtachable rollers. o) Extra bushing for neutral out side the cable box and providing independent earthing for neutral. p) Lifting lugs q) First fill of tranformer oil conforming to relevent IS and tested upto 40 KV dielectric strength.

Supplying, laying , jointing and testing LT underground cable of following size ,heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

(a) 95 Sqmm 3.5 core

(b) 70 Sqmm 3.5 core

(c) 25 Sqmm 4 core(In replacement)

(d) 16 Sqmm 4 core(including 440RM cable for Centralized Hot Water System )

(e) 10 Sqmm 2 core

M&L earthing complete with galvanised steel earth plate (electrode) 600x600x6mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate surrounded with edequate quantity charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using GI strip 32x6mm as earth leed weled/fixed or rivete to earth plate at one end and connected. to main switch control switch of the building at another end, including 20mm dia bore GI pipe ight grade as water pipe from earth chamber to upper edge of earth,GI funnel earth wire mesh fixed on water pipe and provvision of PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in earth pit chamber and RCC pit cover 50mm thick of precast RCC 1:2:4 type B-1 (using 20mm graded stone agg)duly reinforced with mild steel round bars 6mm dia @ 150mm c/c both ways 10mm dia mild steel bars as in litting handles with and including necessary excavation & earth work complete all as specified and directed.

M&L for earthing complete with using galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. Note-(i) if the desired earth resistance is not found within permissible limit (not more than 10 ohm), item shall be re-done by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15mm dia pipe medium grade is deemed to be included in the rate quoted for this item

Supply, laying & testing cable XLPE insulated, PVC bedded galvanised steel strip or wire armoured electric poer cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sqmm incl material and labour for metallic HT cable route markar of adequate quantity.

Supply and fix 11 KV outdoor type gang oprated air break switch suitable for horizontal or vertical mounting type fixed type complete with 9 insulators of rating 200 Amps complete all as specified and directed

Supply and errect steel tubular pole swaged ISI Marked 11 Mtr long type 410 SP-55 complete with MS base plate 450 x 450 x 6mm pole cap finial taper plug, nuts, washers etc and including Anti climbing device and danger notice plate,painting two coats of aluminium paint over one coat of red oxide primer, 3 Nos band straps with red post office box colour (300mm wide 2 Nos each) synthetic enameled paint including one coat on steel surface embeded in complete all as specified and directed. Note: (1) All excavation & earth work as involved shall be measured & paid seprately. (2) PCC foundation and Coping as involved shall be measured and paid seprately under respective items.

M&L for cross arms bracing, supports, clamps and back plates fabricated from structural steel section including nuts bolts washers, welding, bending cold or hot, drilling holes for bolts washers in any shape or size as indicated or directed and including one primer coat one under coat and one finishing coat paint all complete all as specified and directed.

S&F Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp,HT 11KV complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV garde cable for outdoor termination, heat shrinkble type, joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation of poles including necessary form work with surfaces above gound level finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Excavation in trenches exc. 1.5 mtr wide and exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

Supply and laying pipe galvanized, “Medium grade”, including fittings 25 mm dia complete with all fitting and fixtures concealed in wall/surface or ceiling or laying under ground complete all as specified and directed. Make Jindal / TATA / Prakash

Supply and laying pipe galvanized, “Medium grade”, including fittings 40 mm dia complete with all fitting and fixtures concealed in wall/surface or ceiling or laying under ground complete all as specified and directed. Make Jindal / TATA / Prakash

M&L for insulation of GI pipe with PUF slab 30mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet complete of sizes as shown on pipe 20mm bore pipe complete all as specified and directed.

M&L for insulation of GI pipe with PUF slab 30mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet complete of sizes as shown on pipe 25mm bore pipe complete all as specified and directed.

M&L for insulation of GI pipe with PUF slab 30mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet complete of sizes as shown on pipe 40mm bore pipe complete all as specified and directed.

S&F Pillar Taps ,cast copper alloy ,with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed of size 15 mm dia complete all as specified and directed.

S&F Gun metal globe valve with iron wheel head ,screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed.

S&F Gun metal globe valve with iron wheel head ,screwed both ends for iron pipe and fixed of size 40 mm complete all as specified and directed.

Cutting of existing road for external water supply / external electric supply and making good with PCC (1:1.5:3) of suitable thickness, including excavation of width n.exc 1.5m and depth n.exc 1.5m , removing of WBM and stone soiling complete all as specified and directed.

S&F high pressure monoblock pump with 24 litre capacity pressure tank, coupled with electric motor of capacity 1HP, 230 volts, single phase, 50hz, including connecting accessories of GI i.e, bend, nipple , socket, tee of required size etc, including cutting of existing pipe line complete all as specified and directed. Make Lubi / Crompton Greeves / CRI

Supply ,installation ,commissioning and testing of Centralized Hot water system(Heat Pump) of heating capacity 875 Ltr of water from ambient temperature to 60 degree centrigrade in one hour and Hot water distribution system(Hydro-pneumatic pumps) with return pump to buildings comprising of folowing accessories. 1) Heat Pump Heating Water System (a) Heat Pump of Heating capacity 51kw i.e Heating of 875 Ltr of water from 10 to 60 degree celsius in 1 Hour at ambient temperature,Heat Pump Controller PLC with LCD display and Electronic Expansion Valve,Auto Defrost - 03 No's Make:CELSIUS / VENUS / V-GUARD (b) Scroll Compressor(Make:Danfos/Bitzer) (c) Shell & tube type Heat Exchanger (d) Refrigerant- R407C,Eco-friendly (e) Fans- Low Noise-6 pole,Motors,Axial flow,Top Discharge (f) Circulation pump for HP 51-13 with Variable Frequency Drive ,Skid Mounted - 03 No's(Make: CRI/Kirloskar) (g) Return Pump with Programmable Timer with Real Time Clock,Skid mounted(Make: CRI/Kirloskar). Contd......

(h) Mild Steel Tank of capacity 5000 Ltr of Cylidrical Tank 8 mm thickness,test pressure 5 kg/cm2,Flanged Man-Hole,Epoxy and Primer coating outside ,Insulation water resistant XLPE-18mm with FRP cladding - 01 No 2) Hydro-pneumatic system for water distribution (a) Monoblock multi stage centrifugal Pump of capacity 1.5 HP(3 Phase,Flow rate of one pump 200 lpm at 20mtr head) -03 No's (b) vertical pressure tank of approx 50ltr capacity(Make: CRI/Kirloskar) (c) Headers : Suction and Discharge ,SS 304 pipes with flanges,complete with NRV,Ball Valves (d) Powder coated Panel with MCB,Contactors,Over-load Relays,LEDs,Connectors,Thimbls,Ferrules,Sleeves,Interconnecting wiring . (e) VFD on pump to prevent frequent ON-OFF and consistent flow as per requirement (Make: Danfoss/Schneider) (f) PLC with 4-line LED Display,Pressure Transducer,Pressure Switch for safety trip,Analogue Pressure Gauge(Make:Unitronics/Schneider),all as specified and directed. Note: (1) Civil work for foundation(if required) shall be paid under B/R schedule. (2) Interconnecting plumbing piping with insulation shall be paid under item no 1 to 9 of this schedule. (3) Internal wiring for Hot water system with distribution deemed to be included in qouted rate. (3)External Power supply with Earthing shall be paid under respective item of Schedule of External Electric Supply

Note : Tenderers may note that amount of credit Rs 5,82,970.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Panwar Construction Co.

M/s Arihant Builders