SITC of Bed Head panel with laying medical copper pipe for Oxygen air and vacuum at make shift Hospital Covid 19 at Shri Lal Bahadur Shastri Govt. Medical College and Hospital, Nerchowk Distt Mandi HP

Amount

MEDICAL COPPER PIPE

Copper Piping :

Installation:

Installation of piping should be carried out as per international standards with utmost cleanliness. Only pipes, fittings and valves which have been degreased as per International standards should be used. Pipe fixing clamps for upto 28 mm diameter. Pipes should be non ferrous suitable for the diameter of the pipe. For the pipes of the sized above 28 mm rigid metallic hanging or cemented supports to be used.

The main lines to the building to be taken overhead through metallic poles or through underground ducts with inspection removable slabs, All pipe joints should be made using inert gas flux less brazing method. All joints should be of copper to copper and should be brazed by silver brazing filler material without flux while being brazed joints shall be continuously purged with oil free dry nitrogen to prevent the formation of copper oxide on the inside surface of the joint. All pipes should be installed without springing or forcing. All pipes should be protected against mechanical injury in a manner satisfactory to authorities having jurisdiction.

Test: After erection, all the new pipes cleaned or purged with the help of dry nitrogen gas. Complete system should be tested with dry nitrogen at 2 times of working pressure for 24 hours.

Painting: All existing and proposed exposed pipes/should be painted with two coats of Synthetic enamel paint & color codification as per international standards. All concealed pipes to have gas identification bands / labels at appropriate distance. Similarly all pipes which need embedding in the wall should be tested /painted/labeled and properly insulated.

Certification: To be certified that pipes are suitable for the particular service and complete cross connection (anti-confusion) test will be carried out.

Lolyd’s

Copper pipe size 76mm x 1.5mm Thickness

Supplying, installation, testing and commissioning of Medical line valve, as per CE Certified/UL Listed Make: Aktive, Becon Medeas, Dragger

Pressure reducing station High Pressure Regulator for oxygen with inlet pressure 9 bar to 10 bar from LMO side and outlet pressure 4 bar to 7 bar. Flow rate is 0-600nm3 per hour (+/-10%) and BSP 1" size

SITC of horizontal/vertical bed head panel (CE marked ) as mentioned below

Bed head panel should confirm to NEPAGG/HTM-02-01/ISO-7396-I/DIN/EN.

Efficient safe & robust design in extruded aluminum section.

Smooth curved surface and choice of base column and fascia plates.

Unit should be constructed of aluminum extrusions joined together.

Unit should be factory assembled.

Unit should have electrical and mechanical components

Unit should have built light feature.

Following accessories should be provided locally with HBHP :-

5/15 amp modular electrical socket with switch 6sets

7V pole-2 no

Vacuum slide – 2no

Sliding block- 2no

Nurse call system module (cut out provision only)-1no

Utility basket – 1no

Bed head panel -

ULTIMED SOLUTION