SPECIAL REPAIR FOR REPLACEMENT OF EXISTING WATER SUPPLY PIPE LINES IN AD REGT SP AND ITS CONNECTED AREAS AND PUMP SETS AT WATER SUPPLY INSTALLATIONS AGAINST BER PUMP SETS UNDER GE UTILITY AMBALA CANTT

Amount

Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in hard/ dense soil for laying of pipe line and getting out complete all as specified and directed.

Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed .

Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Removal of excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed .

Taking up/down existing pipes with connection from trenches incl connected fittings/accessories complete of 300 mm bore size complete all as specified and directed .

All as per Item Sl No 5.00 here in before but of size 250 mm bore.

All as per Item Sl No 5.00 here in before but of size 150 mm bore.

All as per Item Sl No 5.00 here in before but of size 100 mm bore.

Supply, laying & testing ductile iron pipe of 300 mm bore, S/S,Class K-9 , including rubber gasket(tyton) joints, nut, bolts & washers ISI marked complete all as specified and directed.

All as per Item Sl No 9.00 here in before but of size 250 mm bore.

All as per Item Sl No 9.00 here in before but of size 150 mm bore.

All as per Item Sl No.9.00 here in before but of size 100 mm bore.

Material and labour for ductile iron fittings for spigot and socket /fanged pipe such as bends (any type radius and angle) tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch , cross collers , caps and plugs upto 300 mm bore complete all as specified and directed .

Supply and Fix in replacement cast iron sluice valve PN-1.6 with flanged ends 250 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber boared gasket nuts, washers etc complete all as specified and directed .

All as per srl item No 14.00 here in before but 150 mm bore.

All as per srl item No 14.00 here in before but 100 mm bore.

All as per srl item No 14.00 here in before but 80 mm bore.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars, in any situation etc complete all as specified and directed .

Material and labour brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed .

Taking up/down steel tubing 80mm dia GI/CI/PCC pipelines/connection from trenches incl connected fittings/ accessories complete all as specified and directed .

All as per srl item No. 20.00 here in before but of 50 mm bore.

All as per srl item No. 20.00 here in before but of 40 mm bore.

All as per srl item No. 20.00 here in before but of 25 mm bore.

All as per srl item No. 20.00 here in before but of 20 mm bore.

Supply and laying in trenches GI pipe 80 mm bore medium grade ISI marked with all fittings complete all as specified and directed .

All as per srl item No. 25.00 here in before but of 50 mm bore.

All as per srl item No. 25.00 here in before but of 40 mm bore.

All as per srl item No. 25.00 here in before but of 25 mm bore.

All as per srl item No. 25.00 here in before but of 20 mm bore.

Supply and fix in replacement gun metal globe or gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 50 mm bore complete all as specified and directed .

All as per item 30.00 here in before but 25 mm bore.

All as per item 30.00 here in before but 20 mm bore.

Supply and Fix in replacement of Ball valves (Float valves) of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed . Make: prayag or equivalent as approved by GE.

Material and Labour for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) for filling of road/path cutting etc complete all as specified and directed .

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed .

Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored , interlocking designer paver blocks, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 25mm compacted sand cushioning ,including 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50mtr but n. exc 250mtr, complete all as specified and directed.

Material and Labour for PCC Block masonry valve pit of size 120 x 120 x 120 cm (internal dimensions of chamber) built in CM 1:6 including 10mm thick plastering internally with cement mortar 1:6 and flush pointing externally as the work proceeds in same mortar complete with 3.15mm thick MS sheet cover with angle iron 40 x 40 x 6mm frame, handle, locking arrangement including provisioning of 2 foot steps made out of MS 16mm round bars and painting steel surface (cover inside and outside with frame) with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Note : - Any surface / road / foothpath damaged during the execution of the work will have to be make good by the contractor if not done then penalty of Rs. 250/- per sqm will be imposed on the contractor.

Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 75 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, 625 GPM water discharge , 70 mtr head fitted on Iron base frame with mandatory accessories etc. complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE.

Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 20 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, 20000 GPH water discharge , 200 foot head fitted on Iron base frame with mandatory accessories etc. complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos or as equivalent approved by GE.

Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 10 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, 825LPM water discharge , 30 mtr head fitted on Iron base frame complete with mandatory accessories etc.complete all as specified and directed . Make - Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE.

Supply ,Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 100 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pnematic timer ,Overload protection Relay suitable Range, in sheet steel enclosure, with single phase Protection feature for 75 HP motor Rating 415V, 50 Hz, 3 Phase, provided with 4 pole mccb protection of 160amps and suitable size contactors three in no as required etc , complete all as specified and directed .

Supply ,Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 25 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pnematic timer ,Overload protection Relay suitable Range, in sheet steel enclosure, with single phase Protection feature for 20 HP motor Rating 415V, 50 Hz, 3 Phase, provided with 4 pole mccb protection of 63 amps and suitable size contactors three in no as required etc , complete all as specified and directed .

Supply ,Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 10 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pnematic timer Overload protection Relay suitable Range, in sheet steel enclosure, with single phase Protection feature for 10 HP motor Rating 415V, 50 Hz, 3 Phase, provided with 4 pole mccb protection of 32 amps and suitable size contactors three in no as required etc , complete all as specified and directed .

Material and Labour for Earthing complete with galvanised iron earth plate 60×60cm ×6mm thick electrode as earthing lead buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 32x6mm GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and directed . Note : Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Supply & fixing in PVC submersible copper cable flat of size 50 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed.

Supply & fixing in PVC submersible copper cable flat of size 10 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed .

Supply and fix flexible pipe of 50 sqmm for laying cable complete all as specified and directed .

Supply and fix flexible pipe of 20 sqmm for laying cable complete all as specified and directed .

Supply and laying GI pipe 20 mm bore medium grade ISI marked with all fittings complete all as specified and directed.

Supply, fix and testing of Non Return Valve 150 mm dia PN 1.6, connected with two end flanges suitable for connecting with Pipe, nut-bolts etc complete with flanges nut - bolts etc complete all as specified and directed .

Supply, fix and testing of Non Return Valve 100 mm dia PN 1.6, connected with two end flanges suitable for connecting with Pipe, nut-bolts etc complete with flanges nut - bolts etc complete all as specified and directed .

Supply and fix cast iron sluice valve PN-1.6 with flanged ends 150 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber board gasket nuts, washers etc complete all as specified and directed .

All as per item 52.00 here in before but 100 mm bore.

All as per item 52.00 here in before but 80 mm bore.

Supply & Fix Butter Fly Valve lever operated conforming to IS 13095 of size upto 150 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc with flanges nut - bolts etc complete all as specified and directed .

Supply & Fix Butter Fly Valve lever operated conforming to IS 13095 of size upto 100 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc with flanges nut - bolts etc complete all as specified and directed .

Supply and fix gun metal globe or gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 20mm bore complete all as specified and directed .

Material and Labour for fittings for flanged pipe such as bends (any type radius and angle) tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross collers, caps and plugs upto 150 mm bore complete all as specified and directed .

Material and Labour for foundation with change heavy duty Mild steel channel (Mild steel channel size not less then ISMC 125mm thickness 8mm appx.) complete for pump motor set including PCC (1:2:4) type B1 (using 20 mm graded aggregate) staging size not less then 2.5x1.05x1.0Mtr for surface channels including plaster for above surface, welding work, frame work, Nut & Bolt of suitable size as per old, finishing of staging, leveling and painting, bending cold or hot, drilling holes for bolts of any shape and sizes with hold fast arrangement each for pumping set complete all as specified and directed .

Note:- Amount of credit of Rs. 157695.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

KULWANT SINGH (BID ID -3123454)