Source strengthening of various water supply schemes under Jal Shakti Sub-Division Sandhole Distt. Mandi HP

Amount

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :-

Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand: 3 graded crushed stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Wall (any thickness but not less than 0.10 mts.Thickness) attached pillasters,buttresses plinth,& string courses etc. from top of found.level upto floor two level complete in all lead and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing laying of Tor steel reinforcement for RCC work including bending binding and placing in position including wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge.

Cutting in earth work and disposal of excavated earth within all leads and lifts, disposed earth to be levelled and neatly dressed complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Wire crates G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for seperately) in all leads and lifts as per direction and to the entire satisfaction of Engineer -in-Charge.

Wire crates made of G.I wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for seperately) G.I. wire 5mm thick corresponding to SWG-6, 15cmx15cm mesh in all lead and lift as per direction and to the entire satisfaction of Engineer-in-Charge.

Kuldeep kumar sharma

M/s Sharma Light house