Tender for Erection & Maintenance and Labor works for Laying, testing & commissioning of 11/22 KV underground / Overhead XLPE cable (XLPE cable to be supplied by DGVCL), with cable End termination & straight through jointing kits (to be supplied by contractor) for Various feeder under jurisdiction of Dungri sub division under Valsad Rural Division under All Scheme.

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE

INCLUDING FIXING OF CROSS ARMS, CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING

COMPLETE WITH COST OF PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG

INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES, INSULATORS

2 9926000002 ETC. COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS

INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLE, FABRICATED

MATERIALS USED ON THE POLEAND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR

RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH,

FIXING CROSS ARMS, TOP FITTING

CLAMPS,ANTI-CLIMBING DEVICES DANGER

BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

5 9926000005 DANGER BOARDS,INSULATORS ETC.COMPLETE No.

AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF

TO 11 METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OFEARTH,

FIXING OF CHANNELS, SUPPORTING ANGLES,

CLAMPS,ANTI-CLIMBING DEVICES DANGER

BOARDS, INSULATORS ETC.COMPLETE &

PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

200 KG PSC POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH,FIXING OF

CHANNELS SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES, DANGER BOARDS,

INSULATORS,DOFUSES ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF

PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES, 9 TO

METERS STEEL POLES INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, FIXING

OFCHANNEL, SUPPORTING ANGLES, CLAMPS,

ANTI-CLIMBING DEVICES , DANGER BOARDS,

INSULATORS, ETC. COMPLETE AND PAINTING OF

POLES FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG PSC

POLE METERS POLES INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING

9 9926000009 OF CHANNELS, SUPPORTING ANGLES,BRACINGS No.

CROSS ARMS CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USEDON THE POLES

AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL

POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE,

10 9926000010 FIXINGOF CHANNELS SUPPORTING ANGLES, No.

BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING

DEVICES, DANGER BOARDS,CONDUCTOR AND

CABLE WIRING ETC. COMPLETE AND PAINTING

OF POLES FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS OF

GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTH AS PER

STANDARD SPECIFICATION WITH STAY CLAMPS,

STAY WIRE, ANCHOR ROD, TURN BUCKLE,

EYEBOLT, GUY INSULATOR, CEMENT CONCRETE

BLOCK ETC. BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING

COST OF CEMENT SAND METAL (1:2:4) AND

12 9926000012 WATER ETC. AS PER STANDARD CMT

SPECIFICATION.(cement Should be 53 grade)

used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING

COST OF COAL,SALT ETC. BUT WITHOUT COST

OF GI WIRE AS PER STANDARD

SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT

14 9926000014 WITHOUT COST OF PIPE/GIPLATE GI WIRE AS No.

PER STANDARD SPECIFICATION.(20kg solt+20kg

ERECTION OF STREET LIGHT FIXTURE COMPLETE

WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER

15 9926000015 TECK WOOD BUSH,REFLECTORS FUSE, WIRING No.

ETC. AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2

AAA CONDUCTOR for ALL TYPE OF CONDUCTOR

16 9926000016 (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT

LINES INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING

BINDING JUMPERING ETC.

PROVIDING SINGLE PHASE SERVICE

CONNECTION WITH PVC 2.5/4MM2 TWIN CORE

CABLE FROM TERMINAL POLE TO METERING

18 9926000018 POINT INCLUDING FIXING OF METER WITH No.

METER EARTHING COMPLETE WORK AS PER

STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2 FOUR

CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIXING OF METER No.

WITH METER EARTHING COMPLETE WORK AS

PER STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN

HARD ROCK AREA FOR ERECTION OF POLE/ GUY

ETC. AS PER STANDARD SPECIFICATION OVER &

ABOVE NORMAL COST COVERED AGAINST

EXCAVATION OF PIT UNDER NORMAL SOIL FOR

ERECTION OF POLE,GUY, DOUBLE POLE

STRUCTURE EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON ROAD/

PROVIDING GUARDING OF LT LINES ON

ROAD/RAIL CROSSING.

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR

25 9926000025 ROAD CROSSING,HT LINE CROSSING AND No.

TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH

HG FUSES,TRANSFORMERS, LIGHTENING

ARRESTOR, DISTRIBUTION BOX. ON 8 METERS

200 KGAND PSC POLE INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING

OF CHANNELS, SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR,

DISTRIBUTION BOX. ON 9 to 11 METERS RSJ

POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING

27 9926000027 OF CHANNELS, SUPPORTING ANGLES,BRACINGS No.

CROSS ARMS CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG

INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OF CROSS ARMS, TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES,

28 9926000028 INSULATORS ETC. COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 270 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

29 9926000029 DANGER BOARDS,INSULATORS ETC.COMPLETE No.

AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC ONE

CONDUCTOR FOR 11/22KV & LT LINES COND

INCLUDING FIXING OFINSULATORS, BINDING PER

JUMPERING ETC. KM

STRINGING OF DOG CONDUCTOR FOR 11/22KV

31 9926000031 & HT LINES INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS

KGAND PSC POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING

32 9926000032 OF CHANNELS, SUPPORTING ANGLES,BRACINGS No.

CROSS ARMS CLAMPS, ANTI-CLIMBING

DEVICES,DANGER BOARDS, CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8

MTR PSC POLE) (WITH TRANSFORMER) WITH

CREDITING OF FABRICATION & TRANSFORMER

AT STORE & STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL

DISMENTALLING OF TRANSFORMER CENTRE (8

MTR PSC POLE) (WITHOUT TRANSFORMER) WITH

36 9926000036 CREDITING OF FABRICATION AT STORE & No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25

SQ MM INCLUDING FITTING OF ALL ACESSARIES

I.E. SPECIAL DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT SHACKLE

37 9926000037 INSULATOR ETC. FOR FIXING OF MESSENGER KM

WIRE AND TO PROVIDE SERVICE CONNECTION

ON AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF

MESSENGER WIRE AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ

MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

39 9926000039 FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED & DIRECTED

BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95

SQ MM INCLUDING FITTING OF ALL ACESSARIES

I.E. SPECIAL DESIGN SUSPENSION / TENSION

40 9926000040 CLAMP, FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED AND

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF

41 9926000041 MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN

DISMENTALING OF RSJ (9/11 METER) POLE AND

CREDITING THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITHOUT

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE

SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITH TRANSFORMER)

44 9926000044 WITH CREDITING OF FABRICATION AT STORE No.

AND STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80

SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM

+95 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM +

1*25 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

48 9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM KM

+1*25 SQ MM+1*35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO DEPARTMENTAL

DISMENTALING OF LT ABC OF 2*50 SQ MM

49 9926000049 +1*25 SQ MM+ 35 SQ MM AND CREDITING KM

FITTING OF ALL ACESSARIES TO DEPARTMENTAL

RESTRINGING OF ALL TYPE OF CONDUCTOR ONE

(EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT COND

LINES INCLUDING FIXING OF INSULATORS, PER

BINDING JUMPERING ETC. KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV COND

HT LINES INCLUDING , BINDING JUMPERING ETC. PER

LABOUR CHARGE FOR THE INSTALLATION OF

52 9926000052 NEW DTR METER. (METER WILL BE PROVIDED BY No.

LABOUR CHARGE FOR THE REPLACEMENT OF DTR

METER AND OLD METER SHOULD BE CREDITED

TO SDN STORE. (METER WILL BE PROVIDED BY

LABOUR CHARGE FOR PROVIDING CT COIL FOR

54 9926000054 DTR METER CONNECTION. (CT COIL WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL

FOR DTR METER CONNECTION AND OLD CT PER

SHOULD BE CREDITED TO SDN STORE. (CT COIL CT

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR

METER (MMB WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR

57 9926000057 METER BOX. (METER WILL BE PROVIDED BY No.

PROVIDING / REPLACEMENT OF 1.5 SQ MM

58 9926000058 CORE COPPER CABLE 3.5 METER (CABLE TO BE No.

PROVIDED BY AGENCY)

LABOUR CHARGE FOR PER

PROVIDING/RECONNECTION OF TERMINAL TERMI

CONNECTION WITH PROPER SIZE OF LUGS. NATIO

(LUGS COST IS BORNE BY AGENCY) N

LABOUR CHARGE FOR THE SPOT READING OF

DTR METER WITH DETAIL SURVEY OF DEFECT IF

ANY. A DULY SIGN COPY BY SURVEYOR PERSON

OF AGENCY IN PRO-FORMA REPORT SHOULD BE PER

SUBMITTED TO SDN OFFICE.(* ONLY IF ALL DTR

PARAMETER OF VOLTAGE, CURRENT & LOAD AS

SHOWN IN PER-FORMA IS FILLED) AS PER THE

INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF

DTR METER WITH DETAIL SURVEY OF DEFECT IF

ANY. A DULY SIGN COPY BY SURVEYOR PERSON

61 9926000061 OF AGENCY IN PRO-FORMA REPORT SHOULD BE

SUBMITTED TO SDN OFFICE. (DULY FILL PER-

FORMA IN FAULT CONDITION IN WHICH

READING PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING

METER BOX, PROVIDING & FIXING OF 1.5SQ MM

SINGLE STRAND 10 CORE ARMOURED COPPER

CABLE (3.5METER), TERMINATION IN METER &

COIL ETC.(METER, METER BOX, C.T./P.T. COIL

WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING

METER BOX, TERMINATION IN METER & COIL

63 9926000063 ETC. (WITHOUT 10CORE COPPER CABLE) No.

(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance

not more than 0.75 mtr with 6 turns minimum on

XLPE Cable with single strand binding wire

(including cost of binding wire)

Supply and Installation of 11/22 kV Distribution

Transformers HT Terminal protector (UV PER

Resistance) with using 95/120/150 sq.mm long SET

barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV

Distribution Transformer with replacement of bare

conductor by HT ABC conductor (DO bottom side PER

to transformer) after removal of semi conductor by SET

HT ABC (6 inch both side). HT ABC to be supplied

by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT Feeder Pole

Having 2000 mm Electrode Length as per the

Tender Specifications and Drawing. (All Materials

Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT Feeder Pole

Having 3000 mm Electrode Length as per the

Tender Specifications And Drawing. (All Materials

Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip

having hot dip- galvanized-zinc coating of 80-100

microns without any joints or welding. Both the

end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving

separate earthing connections to

69 9926000090 (1) Neutral of the transformer Meter

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per transformer

- as per requirement and instruction of

Engineer in- charge) (All Materials will be supplied

Supply and Installation of uPVC standard make

Pipe of 1.25" diameter for covering GI strip with

UV protected Cable Ties of 550 X 7.6 mm size to

70 9926000092 bind with pole face(Approximately 25 meter uPVC Meter

pipe for GI strip covering per transformer centre -

as per requirement and instruction of Engineer in-

Supply & fixing of upto 33 kV Conducotr sleev for

Busbar to Drop out Fuse and Drop out fuse to

71 9926000093 Transformer H.T. including Busbar (12 mm sleev) Meter

as per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for

Busbar to Drop out Fuse and Drop out fuse to

72 9926000094 Transformer H.T. including Busbar(15 mm sleev) Meter

as per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-

flammable) material with Weather resistant, Non-

73 9926000095 conductive bird guard OD=300 MM, ID=33 MM, NO

Width =1.25 MM, one side cut from ID to OD. (All

Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e.

Re-useable boot (LT Side 1.1 kV) including LT (1.1

kV) insulating taps. All live part at LT side shall be

covered with fixing of LT insulating taps.

75 Nylon Net around Transformer Center

75.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated

75.3 9926000099 material for fitting nylon net shall be provided by Per TC

-::- SCHEDULE – ‘B 2’: FOR MAINTENANCE -::-

The Rates are inclusive of PF and Exclusive of GST

-::- SCHEDULE – ‘B 2’: FOR MAINTENANCE -::-

Item Code Details of works Unit FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surrounding HT/LT line

Replacement of old jumpers & providing new

2 9924000002 double jumpers with 8" binding [D Type] & No.

capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per

pole in costle area with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

Replacement of one/both disc.insulator at strain

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With Transportation

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting &

jumpering(ONE DO FUSE)

Numbering of pole with paint by preparing back

15 9924000017 ground of one color and have lettering(height 3" * No.

width 0.5") using stencil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with

letter size height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with

letter size height 40mm* width 8mm)

Replacement of deteriorated Single phase Service

Fixing of new dist. Box with complete wiring

including clamps,nut bolts etc.

Reparing of guarding involving reshaping of

bearer wire cross lacing binding etc.

Painting of steel fabricated material of RSJ DO DP

structure with paint

Painting of steel fabricated material of RSJ pole

26 9924000028 mounted transformer double pole structure with No.

Painting of steel fabricated material of RSJ single

pole with paint

painting of steel fabricated material of PSC Single

pole (HT line) with paint

painting of steel fabricated material of PSC DO DP

double pole with paint

painting of steel fabricated material of PSC

30 9924000032 double pole at pole mounted transformer with No.

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along

with adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist.

34 9924000036 Box with new up to 100KVA capacity & crediting No.

Replacement of deteriorated /providing LT dist.

35 9924000037 Box with new above 100KVA capacity & crediting No.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including locatio

dismentaling & restringing etc. n

replacement of 11KV Pin insulator with providing

new double pin binding

replacement of 22KV Pin insulator by new 11kv

40 9924000042 pin insulator with spares & providing new double No.

Providing 11kv double disc insulators with binding

Replacement of existing 11kv conductor (all size) Cond/K

with new double pin binding M

Plumbing of PSC Pole with straightening at pin

Plumbing of PSC Pole with straightening at

Plumbing of tilted DP structure (PSC/RSJ/STP)

with refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with

46 9924000049 fabrication and insulated colour code jumper, Set

binding, lugs etc

Replacement of old 11kv AB /GO switch with

providing new insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line per

with using PVC reel insulators etc pole

Labour charges for replacement /providing of

49 9924000053 MMB & service with all accessories for three phase No.

Labour charges for replacement /providing of

50 9924000054 MMB & service with all accessories for single No.

phase connection

Dismentalling of existing Dist.X'mer center(RSJ

51 9924000055 /STP POLE) 25/63/100/200 KVA with all No.

fabrication & creditig the old material to store

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole

& crediting to S/dn (1 ph.)

Dismentaling & removing of service line from pole

& crediting to S/dn (3 ph.)

Reconnection of service line complete with PVC

Reconnection of service line complete with PVC

Providing spiral type earthing by G.I. NO 8(weight

2kg -5mtr in length) with salt and coal 10kg each,

including pvc rigid pipe 20mm dia( 1.5mtr length)

to pass exposed part of G.I. wire at consumer

end with all materials, earth resistance should be

less than 2 ohms

Providing and fixing of signle core 1.5 sq mm

single strand copper insulated cable with cable

nail clip for spiral type earthing at consumer end.

The end of G.I. no 8 is to be connected by

connector with copper cable of which other end per

shall be connected to the earth terminal of meter meter

box. This item shall be used in location where

there is more distance between earth terminal

and earthing terminal of meter. (All materials

supplied by contractor)

9924000065 Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ

MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross

arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling

charge of existing bare conductor and crediting in

to store & dismantling of service line from LT bare

conductor and to provide service connection on

Aerial Bunch Cable by insulated piercing

connectors through service connection box

complete as required & directed by Engineer in

9924000066 Stringing of LT ABC of 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM including fitting of all

accessories i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and

63 inclusive of dismantling charge of existing bare

conductor and crediting in to store & dismantling

of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable

by insulated piercing connectors through service

connection box complete as required & directed

by Engineer in Charge.

9924000067 Stringing of 11KV ABC of 3*95 SQ MM +80 SQ

MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross

arm, binding to pin insulator, preparing shackle

point, jumpers etc. and inclusive of dismantling

charge of existing bare conductor and crediting in

to store complete as required & directed by

Engineer in Charge.

9924000068 Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ

MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross

arm, binding to pin insulator, preparing shackle

point, jumpers etc. and inclusive of dismantling

charge of existing bare conductor and crediting in

to store complete as required & directed by

Engineer in Charge

9924000069 Stringing of LT ABC of 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM including fitting of all accessories

i.e. special design suspension / tension clamp,

fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and

crediting in to store & dismantling of service line

from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated

piercing connectors through service connection

box complete as required & directed by Engineer

Supply and fixing of suspension clamp to hold the

-::- SCHEDULE – ‘B 3’: FOR Underground -::-

LABOUR RATE FOR UNDERGROUND CABLE WORK (WITHOUT GST)

Item Code Description Unit FY 2024-25

Labour charge for excavation of cable

trench of 400mm width x 1200mm

depth, in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional

width shall be considered i.e. half

trench length is to be considered)

Labour charge for excavation of cable

trench of 600mm width x 1200mm

depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional

width shall be considered i.e. half

trench length is to be considered)

Labour charge for excavation of cable

trench of 400mm width x 1500mm

depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional

width shall be considered i.e. half

trench length is to be considered)

Labour charge for laying of 11kV /

kV XLPE Cable of size up to

mm2 & preparation of sand layer

100mm thick, in the cable trench &

covering the cable with 150 mm dia

(Inner), thickness 25 mm,

meter long RCC half round muffs and

providing and fixing of 4inch width

4 9925000004 yellow colour polyethylene tape with Meter

printing "CAUTION ELECTRIC CABLE

BELOW" at 0.75 m depth from ground

surface after laying cable in trench.

This will provide indication that electric

cable is passing underground so as to

protect cable from mechnical injuries,

refilling the same, as per Instruction of

Engineer in Charge (EIC).

Labour charge for horizontal drilling

using Auger machine without

damage to surface road at max

mtrs depth & putting of 6.11 kg/cm2

class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision)

and BIS certification and laying of

11KV/22KV XLPE cable of size up to

240 mm2 in HDPE pipe, as per Site

Condition (excluding cost of pipe). The

detail map obtained from HDD

machine and excell sheet(hard and

soft copy) indicating the respective

depth and distance from adjacent

landmark for each segment for HDD is

must required to be submitted. HDD to

be carried out at depth 1.5 mtrs to

mtrs as per site conditions and as per

instruction of EIC.

Labour charge for horizontal drilling

manually without damage to surface

road at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS

certification and laying of 11KV/22KV

6 9925000006 XLPE cable of size up to 240 mm2 Meter

size, as per Site Condition (excluding

cost of pipe). The detail map and

excell sheet(hard and soft copy)

indicating the respective depth and

distance from adjacent landmark for

each segment of cable to be

submitted. Drilling to be carried out at

depth Minimum 1.2 mtrs to 2.0 mtrs

as per site conditions as per

instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5 mm thickness

H.D.P.E. pipe confirms to IS

and BIS certification for laying of

underground 11KV / 22KV XLPE cable

up to 240 mm2 size.

Labour work for RCC concreting on

disputed location and repairing of

damage portion of road crossing for

the work carried out for roads crossing

as well as concreting & muffing of

ploes including all materials (1:2:4)

Providing & fixing concrete stone route

marker of 300 mm width x 150 mm

thick x 650 mm height embedded

in earth at least 300 mm below &

mm above ground level respectively at

distance approx 50 meters along the

length of cable. The RCC concreting

(1:2:4)(all necessary maeterials will be

in bidder's scope) of route marker is to

be carried out 300 mm width x

mm thick x 300 mm below ground

level as per instruction of EIC. The

route marker should be with name of

company with approved yellow colour-

DGVCL. The distance from marker to

cable and cable depth with feeder

name etc., marked with arrow sign is

to be painted on it.The route marker is

to be fixed at location near to any

fixed permanent location (not

necessary to fix exact on top of cable)

as per instruction of EIC.

Erection of D.P. (double pole)

structure using 9 / 11 Mtr. RSJ

pole with cable connection

arrangement along with fitting of

10 9925000010 necessary fabrication for 11KV cable No.

including excavation of pit & refilling of

earth as per instruction of EIC.

(Exclusive of concreting & muffing of

Erection of Single pole structure

using 9 / 11 Mtr RSJ pole with

cable connection arrangement along

with fitting ofnecessary fabrication for

11KV/22 KV cable including excavation

of pit & refilling of earth as per

instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of D.P. (double pole)

structure using 8.0 Mtr. PSC pole

with cable connection arrangement

along with fitting of necessary

fabrication for 11KV cable including

excavation of pit & refilling of earth as

per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole structure

using 8.0 Mtr PSC pole with cable

connection arrangement along with

fitting ofnecessary fabrication for

11KV/22 KV cable including excavation

of pit & refilling of earth as per

instruction of EIC. (Exclusive of

concreting & muffing of poles)

Labour charge for erecting of 11kV /

22 kV XLPE cable of size up to

mm2 on DP Structure with fixing

14 9925000014 of 02 Nos polymer cleats on top Per Job

and middle part.Polymer cleats, nut

bolts etc. fixing material to be

provided by contractor.

Providing & fixing of 6.11kg/cm2

class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS

certification on the erected DP

structure for the mechanical

protection of cable by inserting the

15 9925000015 cable inside HDPE pipe. The HDPE Per Job

pipe shall be erected in such a way

that 300mm shall be below the ground

level and the rest 2700 mm shall be

supported on the DP Structure with

01 No Polymer cleat.All materials

including polymer cleat and Nut bolt

to be provided by contractor.

Providing and fixing of pipe type

earthing from 80 mm dia class-B GI

pipe with pit to be filled with salt &

coke and construction of chamber as

per DGVCL Drg. No. dg /100 for DP

and cable. The earthing pit should be

joined with cable by G.I. strip of size

1” width & 2 mm thick. All material GI

pipe, Coke, Salt etc will be supplied by

Supply & fixing of heat shrink

type end terminations (outdoor)

17 9925000017 for upto 11kV 3C x 185 mm2 size No.

XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable

end terminations (outdoor) for

18 9925000018 upto 22 kV 3C x 185 mm2 size XLPE No.

cable as per DGVCL technical

Supply & fixing of heat shrink type

end terminations (indoor) for

19 9925000019 upto 11kV 3C x 185 mm2 size XLPE No.

cable as per DGVCL technical

Supply & fixing of heat & shrinkable

end terminations (indoor) for

20 9925000020 upto 22 kV 3C x 185 mm2 size No.

XLPE cable as per DGVCL technical

Supply & fixing of heat shrinkable

straight through joint for upto

21 9925000021 11kV 3C x 185 mm2 size XLPE No.

cableas per DGVCL technical

Supply & fixing of heat shrinkable

straight through joint type for

22 9925000022 upto 22kV 3C x 185 mm2 size XLPE No.

cable as per DGVCL technical

Labour charge for excavation of

2100mm long x 1200mm wide x

mm deep joint pits for installation of

11kV / 22kV Straight through

joints as per instruction of engineer-

in-charge & covering the cable with

150 mm dia (Outer), thickness

mm, 1.0 meter long RCC half round

muffs & refilling same as per

instruction of EIC .

Providing and fixing of insulating bus

bar, made from 11KV/22KV XLPE

cable after removal of semi conducting

layer and applying of PVC heat

shrinkable anti-tracking core insulating

tubing (1.1KV), on both end terminal

using Aluminium long barrel heavy

duty up to 240 sq mm lugs,

Aluminium bus connector. Taping with

PG- clamp for bus conductor as per

drawing and as per instruction of EIC.

The Alluminium lugs and PG clamp

shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE

cable will be in scope of DGVCL while

all other materials will be in bidder's

Testing of cable at various points

and commissioning the feeder as per

25 9925000025 instruction of engineer-in-charge.Test No.

result shall be submitted by contractor

Preparation and submission of 6 (six)

copies, of complete layout

drawings with GIS mapping as per

actual cable routing showing road

crossing, HDPE pipe sleeving, jointing

locations, markers etc.

Providing and fixing of Sign Board at

junction point Made out of 2 mm

aluminium sheet size 750x300 mm

(2.5 x 1ft) rectangle, as per design,

pre treated with phosphate process

and acid etching coated with one coat

of epoxy primer and two coats of best

quality paints, refloctrorised with Hi-

Intensity retro – reflective sheeting as

per the latest and frame fabricated

from suitable size iron angle. The Sign

Board is to be fixed on the base

prepared from channel and bracing

angles which is grouted by means of

cement concreting of 1:2:4 for size of

300 mm dia x 800 mm height (500

mm to be grouted in ground). The

details to be displayed on sign board

will be given by In-charge Engineer.(a)

Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board

(Danger Board) on Distribution

Transformer Centers

Made out of 2mm aluminum sheet size

300x300mm (1x1ft) as per design,

pretreated with phosphate process

and acid etching coated with one coat

of epoxy primer and two coats of best

quality paints, reflectorized with Hi-

Intensity retro-reflective sheeting as

per the latest and frame fabricated

from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at

the location as per instruction of In-

charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminum tag of

size 250 mm (L) x 75 mm (W) from

mm aluminum sheet along with

mm Dia aluminum binding wire for

fixing of aluminum tag near end

29 9925000029 termination joint at DP structure for No.

identifying the cable. The details of

feeder i.e. 11 / 22 KV with feeder

name should be punched on the tag

by letter punch of size 16 mm as per

instruction of In-charge Engineer.

Supply & fixing of heat shrink type

end terminations (outdoor) for

11kV 3C x 240 mm2 size XLPE cable

as per DGVCL technical specification

Supply & fixing of heat & shrinkable

end terminations (outdoor) for

kV 3C x 240 mm2 size XLPE cable as

per DGVCL technical specification)

Supply & fixing of heat shrink type

end terminations (indoor) for 11kV

3C x 240 mm2 size XLPE cable as

per DGVCL technical specification)

Supply & fixing of heat & shrinkable

end terminations (indoor) for

kV 3C x 240 mm2 size XLPE cable as

per DGVCL technical specification

Supply & fixing of heat shrinkable

straight through joint for 11kV 3C

x 240 mm2 size XLPE cable as per

DGVCL technical specification.

Supply & fixing of heat shrinkable

straight through joint type for

22kV 3C x 240 mm2 size XLPE cable

as per DGVCL technical specification

Installation, Testing and

commissioning of 11 KV,630 A SCADA

Compatible, RRL type- 3 Way RMU

36 9925000038 including Two numbers of earthings as No.

per Drawing (material is in bidder's

scope) and as per DGVCL Technical

Installation, Testing and

commissioning of 11 KV,630 A SCADA

Compatible, RRLL type- 4 Way RMU

37 9925000039 including Two numbers of earthings as No.

per Drawing (material is in bidder's

scope) and as per DGVCL Technical

Installation, Testing and

commissioning of 22KV,630 A SCADA

Compatible, RRL type-3 Way, RMU

38 9925000040 including Two numbers of earthings as No.

per Drawing (material is in bidder's

scope) and as per DGVCL Technical

Installation, Testing and

commissioning of 22KV,630 A SCADA

Compatible, RRLL type-4 Way, RMU

39 9925000041 including Two numbers of earthings as No.

per Drawing (material is in bidder's

scope) and as per DGVCL Technical

Construction of plinth for 11KV,

RRL type- 3 Way (i.e. Two numbers

of Isolator & One number of Breaker)

40 9925000042 Ring Main Unit as per DGVCL's No.

technical specification mentioned in

drawing no: Drg. 11kv-01. All required

material will be supplied by contractor.

Construction of plinth for 11KV,

RRLL type- 4 Way (i.e. Two

numbers of Isolator & Two number of

Breaker) Ring Main Unit as per

DGVCL's technical specification

mentioned in drawing no: Drg. 11kv-

02. All required material will be

supplied by contractor.

Construction of plinth for 22KV,

RRL type- 3 Way (i.e. Two numbers

of Isolator & One number of Breaker)

42 9925000044 Ring Main Unit as per DGVCL's No.

technical specification mentioned in

drawing no: Drg. 22kv-01. All required

material will be supplied by contractor.

Construction of plinth for 22KV,

RRLL type- 4 Way (i.e. Two

numbers of Isolator & Two number of

Breaker) Ring Main Unit as per

DGVCL's technical specification

mentioned in drawing no: Drg. 22kv-

02. All required material will be

supplied by contractor.

Modifications e.g. Providing and fixing

of Terminal protectors i.e. Re-use able

boot (HT Side 11/22KV, LT Side

1.1KV) including 11/22 KV insulating

taps and L.T.(1.1 KV) insulating taps

,Busbar, Tapping from Bus Bar

(11/22 KV XLPE cable) through P.G.

Clamp for H.T. Jumper to D.O. Fuse to

bushings of Transformer Center,

providing & Fixing of jumper and

44 9925000046 providing & fixing of Heat Shrinkable No.

Anti Tracking Core Insulating Tubing

(Insulation Level 11/22 KV) in H.T.

jumper , Clamping arrangement of

cable support frame on both side of

existing Over Head type Distribution

Transformer to utilize in Under Ground

cable network as per drawing & as per

instruction of Engineer in charge. All

live parts i.e. PG-Clamp, connections

of D.O. fuses, HT bushings etc. shall

be covered with fixing of 11/22 KV HT

insulating tapes. (11/22 KV XLPE cable

will be in scope of DGVCL while all

other materials will be in bidder's

Laying of any size of 11/ 22 KV XLPE

45 9925000047 /PILC Cable in readymade trench or in

Labor charges for Lying of O/H XLPE

cable pole to pole

Supply of 150 mm Dia (Inner),

47 9925000064 thickness 25 mm, 1.0-meter long RCC No.

half round pipe

Total of schedule B1, B2& B3

(+)_______%Above, (-)_______%Below, Rate to

Net Total of Schedule ‘B1, B2& B3:

Amount in Words: (Twenty-Five Lacs Only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Dungri Sub-Division under Valsad-Rural

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and crediting

in to store & dismantling of service lines from LT bare conductor and to provide service

connections on ABC by insulated pierce connectors through service connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantled material to the DGVCL store at their cost.

7. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ

Poles, Insulators, Fabricated materials etc. to the contractor.

8. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevant ISI specification and as directed by Engineer in charge.

9. Necessary electricity connection for fabricated items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by

10. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

11. All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ

poles & steel fabricated materials of RSJ/PSC poles is must.

(b) Two coats of approved ISI mark red oxide (primer) are to be properly painted

for the RSJ poles & steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent

quality silver paint) are to be properly painted on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

Executive Engineer (O&M)

DGVCL Valsad Rural Division