IMPROVEMENTS TO DNA LAB AT RFSL VISAKHAPATNAM

SPECIALISED ACRYLIC CEMENTITIOUS ELASTOMERIC WATERPROOF 150 COATING TREATMENT Complies with ASTM C 297 Providing and Application of two coets of Acrylic cementitious elastomeric waterproof coating with Roofenat or equuvalent like high alostumeric acrylic polymer modified cementlitious waterproof system for water proofing of terrace/side walls with Providing and Application of two coats of Acrylic cementitious elastomeric waterproof conting with ROOFCOAT (Armstrong) POWER COAT (EBT) BRUSHBOND (Fesroc ZORICOAT (PMCCJUSIKA TOPSEAL 107 (Sika) WATERSHIELD COAT PC like high elastomeric ecrylic polymer modified cementiitious waterproof system.BMT-H.74

Providing the clean surface and sound duly removing of exisiting 1 SQM tretaments clean from dirt, dust and other contaminations by power grinding wire brushing, air blower & jet water cleaing etc complete including cost and conveyance of all materials and labour charges etc.. complete.

MAIN DOOR OF SIZE 2.13 X 2.13M (DOUBLE SHUTTERS) SUPPLY AND FIXING 1 SOM OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 150 MM X 100 MM, INCLUDING & NOS, OF MS HOLD FASTS OF SIZE 230X40X3 MA, 8 NOS. OF 125 MM BUTT HINGES, 2NO, HEAVY DUTY DOOR STOPERS, 4NDS. 150 MM LONG DOOR HANDLES, 1 NO, ALDROP OF SIZE 300 MM LONG 3 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC.. INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHAGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:100181002).

INTERNAL DOOR OF SIZE 1.06 2.10M (SINGLE SHUTTER): SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75MM, INCLUDING 6 NOS, OF MS HOLD FASTS OF SIZE 230X40X3MM, 4 NOS. OF 125 BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG, 1 NO. ALDROP OF SIZE 250 MM LONG, 2 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHAGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE (APSSNO:100161002).

Providing and haing of There shutter Slading Windows made of Galvanized Steel (Base Steel as per 15 513, D quality, galvanized as per 15 277 with Zine of 120 GSM), using factory made section powder coated with Pure polyester powder sato 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill provtsion size of 105 mm x 50 mm and without grill provision is of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter/ sath frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Siticon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work, Window with 3 shutters center Fly mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm 50 mm. Grill made of 10mm MS Square Rods for horizontal bars at a regular pitch of 150mm welded to MS flat of 12 x 6 mm. Center Fly mesh Shutter Sliding: Section for Fly mesh Shutter frame should be of size 20mm x 40mm of 0.58mm thick and fitted with SS meth (304 Grade). The supporting guide section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame and slides along the bottom and top guide tracks made of sections size 20mm x 20mm of 0.58mm and 29mm x 20mm of 0.58mm,

PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE SOM WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, SEIGNIORAGE CHARGES, EXCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK SECOND FLOOR

PATCH PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, SQM WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP, WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC.. COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901 & 904)

FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL SOM BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, 15:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SOM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, INCLUDING SEIGNIORAGE CHARGES, ETC.. COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR

PAINTING TO NEW WALLS WITH 2 COATS OF PREMIUM PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS

PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF SQM APPROVED MAKE LACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING ILIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING TLIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK, ALL FLOORS (APSS NO:908)

PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL SQU PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRISHES INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK (APSS NO.1201, 1207, 1212).

PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL SOM PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK (APSS NO.1201, 1207, 1212).

SUPPLY AND FIXING MS GRILLS TO WINDOWS VENTILATORS OF ALL SIZES KGS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER IN CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK M.S FLATS/PIPES/SQUARE BARS OF ALL SIZES:

Supply and fixing of Venetian blinds Vertical blinds 100 mm wide with all SQM accessories including cost and conveyance of all materials and labour charges etc., complete.

Supplying & Fixing Indian make white glazed vitreous china porcelain sink Each conforming to 15:2556-Part-5-1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to 15:2963-1979: 750 x 450 x 250

Providing & Placing on Terracejat all floor levels) polyethylene water storage Each tank of three layer Roto moulded confirming to 15:12701 approved brand it manufacture with suitable cover/cap and suitable locking arrangement à making necessary holes for intet & outlets and over flow pipes but without fittings ir base support for tanks

Supply and Transportation of 2HP 25 stage, 5star rated submersible motor Each pumpset, confirming to 15 8034 and motor confirming to 15 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V+ 10%, single phase 50 Hz AC supply, etc complete for 4 Bore well.

Supply and laying of 3 Core 2.50 sqmm 5i marked, Flat Copper cable of 151 Each for Submersible Motors confirming to 15:694:1990 including cost and conveyance of all materials and albour charges etc., complete.

Fabrication, transportation and supply of suitable size panel board for single Each phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, Indicator lamps, MCB, on/off switch including supply and fixing of DOL starter of complete....

SUPPLY AND FIXING OF 16/20A MODULAR 1 WAY COMBI SOCKET WITH Each SHUTTER AND 16A/20A 1 WAY MODULAR SWITCH DULY RECESSED IN WALL WITH 4 MODULAR BOX AND 3 MODULAR COVER FRAME INCLUDING EARTH CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE. MAKE: LEGRAND ARTEOR CARBTREE MURANO/GM-ZENOVA/

SUPPLY AND FIXING OF 16/20A 1 WAY MODULAR SWITCH-1 NO WITH 20A Each MODULAR SOCKET-INO AND 6/10AA 3/2 PIN MODULAR PLUG SOCKET-3 NOS WITH GA 1 WAY MODULAR SWITCH 3 NOS WITH 12 MODULE BOX SIZE COVERED WITH 12 MODULE COVER FRAME INCLUDING EARTH CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE (FOR COMPUTER SWITCH BOARD) MAKE: LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOVA

SUPPLY AND RUN OF 2 OF 56/0.3MM (4 SQ.MM) FRLS/ZHFR PVC INSULATED RM 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR COPPER CABLE EXISTING PIPE FOR MAINS INCLUDING ALL LABOUR CHARGES ETC.. COMPLETE (FROM DISTRIBUTION BOARDS TO A/C POINTS AND MAINS TO LOB). MAKE FINOLEX/RR KABEL/HAVELLS

SUPPLY OF 48 (1200MM) SWEEP, 5 STAR RATED CEILING FAN, WITH DOUBLE Each BALL BEARINGS POWER INPUT NOT MORE THAN 53W, AIR DELIVERY MORE THAN 218 CUBIC METERIMIN AND SERVICE VALUE 4.11, BUT WITHOUT REGULATOR INCLUIRING COST AND CONVEYANCE OF ALL MATERIALS ETC. COMPLETE MAKE: CROMPTON/ORIENT

SUPPLY OF 400W STEFFED TYPE ELECTRONIC REGULATOR INCLUDING COST Each AND CONVEYANCE OF MATERIALS AND LABOUR CHARGES ETC., COMPLETE MAKE: LEGRAND ARTEOR/CARSTREE MURANO/GM ZENOV

LABOUR CHARGES FOR FIXING OF CEILING FAN AND REGULATOR INCLUDING Each TRANSPORTATION AND GIVING CONNECTIONS WITH TWIN CORE WIRE ETC COMPLETE

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220-260 Volts, having luminous efficacy >120 lumens/ watt, with PF-0.9, surge protection: 2KV, THD 10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI-70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category 1.MAKES: PHILLIPS/GE/CROMPTON.

SUPPLY AND TRANSPORTATION OF 60W STREET LIGHT LUMINAIRE MADE OF Each PRESSURE DIECAST ALLUMINIUM BODY WITH POWDER COATED, HAVING PROTECTIVE TOUGHNED GLASS COVER INPUT VOLTAGE RANGE OF 120 TO 270 VOLTS AC, POWER FACTOR 0.90, HIGH POWER LED'S HAVING EFFICACY 120 LUMINES/WATT, SYSTEM EFFICIENCYY >95LM/W AND JUNCTION TEMPRATURE 70 DEGREE WITH INGRESS PROTECTIONIP65, DRIVER SURGE PROTECTION 4KV. EXTERNAL SURGE PROTECTION / SKV WITH OPTICS DISTRIBUTION TYPE II MEDIUM THD <10% AT 110 VOLTS AC, DRIVER EFFICIENCY >90% CCT: 300K -5700K, MINIMUM CRI >70, ETC. COMPLETE. WITH 5 YEARS WARRANTY. MAKE: PHILLIPS/GE/CROMPTON/BAJAJ LED MAKE PHILIPS LUMILEDS CREE/NICHIA/OSRAM/

FIXING OF LED STREET LIGHT LUMINARY WITH 1.0 MTR., 25MM DIA GI PIPE Each 732.00 BRACKET AND ANTI TILTING MS FLAT ETC., INCLUDING GIVING CONNECTIONS AND LABOUR CHARGES ETC., COMPLETE.

Supply of fresh air exhaust fan of Heavy duty 250V AC 50Hz../ 300mm size Each (12") 900 R.P.M Metallic body plastic blades, wire mesh, etc., complete. complete. Make Crompton/Orient.

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5mtr. length connected with G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Supply of Door Locks GODREJ MAKE 8 Lever /5 Lever for RFSL Building including cost and conveyance of all materials and labour charges etc., complete.